[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20161118144406.3se7gnckhcmwqytp@rob-hp-laptop>
Date: Fri, 18 Nov 2016 08:44:06 -0600
From: Rob Herring <robh@...nel.org>
To: c_traja@....qualcomm.com
Cc: ath10k@...ts.infradead.org, linux-wireless@...r.kernel.org,
tamizhchelvam@...eaurora.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCHv2 3/4] dt: bindings: add new dt entry for BTCOEX feature
in qcom,ath10k.txt
On Thu, Nov 17, 2016 at 05:14:23PM +0530, c_traja@....qualcomm.com wrote:
> From: Tamizh chelvam <tamizhchelvam@...eaurora.org>
>
> There two things done in this patch.
>
> 1) 'btcoex_support' flag for BTCOEX feature support by the hardware.
> 2) 'wlan_btcoex_gpio' is used to fill wlan priority pin number for
> BTCOEX priority feature support.
>
> Signed-off-by: Tamizh chelvam <tamizhchelvam@...eaurora.org>
> ---
> .../bindings/net/wireless/qcom,ath10k.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
> index 74d7f0a..08150e2d 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
> @@ -46,6 +46,10 @@ Optional properties:
> hw versions.
> - qcom,ath10k-pre-calibration-data : pre calibration data as an array,
> the length can vary between hw versions.
> +- btcoex_support : should contain eithr "0" or "1" to indicate btcoex
> + support by the hardware.
This is BT coexistence? Make this boolean and n
> +- btcoex_gpio_pin : btcoex gpio pin number for the device which
> + supports BTCOEX.
This is a pin number on the chip, not any pin number Linux GPIO subsys
cares about, right? Is there a connection to the host too, or this is
internal between BT and WiFi?
Do you really need 2 properties? Does supporting this feature require
the GPIO? If so, then the first property is redundant.
Needs vendor prefix and don't use '_'. Should be something like
'qcom,bt-coexist-gpio-pin'.
Rob
Powered by blists - more mailing lists