lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1479775052-28194-2-git-send-email-john.stultz@linaro.org>
Date:   Mon, 21 Nov 2016 16:37:30 -0800
From:   John Stultz <john.stultz@...aro.org>
To:     lkml <linux-kernel@...r.kernel.org>
Cc:     John Stultz <john.stultz@...aro.org>,
        David Airlie <airlied@...ux.ie>,
        Archit Taneja <architt@...eaurora.org>,
        Wolfram Sang <wsa+renesas@...g-engineering.com>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        dri-devel@...ts.freedesktop.org
Subject: [RFC][PATCH 1/3] drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally

In chasing down issues with EDID probing, I found some
duplicated but incomplete logic used to power the chip on and
off.

This patch refactors the adv7511_power_on/off functions, so
they can be used for internal needs, and replaces duplicative
logic that powers the chip on and off around the EDID probing
with the common logic.

Cc: David Airlie <airlied@...ux.ie>
Cc: Archit Taneja <architt@...eaurora.org>
Cc: Wolfram Sang <wsa+renesas@...g-engineering.com>
Cc: Lars-Peter Clausen <lars@...afoo.de>
Cc: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: dri-devel@...ts.freedesktop.org
Signed-off-by: John Stultz <john.stultz@...aro.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 30 +++++++++++++---------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 8dba729..b240e05 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -325,7 +325,7 @@ static void adv7511_set_link_config(struct adv7511 *adv7511,
 	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
 }
 
-static void adv7511_power_on(struct adv7511 *adv7511)
+static void __adv7511_power_on(struct adv7511 *adv7511)
 {
 	adv7511->current_edid_segment = -1;
 
@@ -343,6 +343,7 @@ static void adv7511_power_on(struct adv7511 *adv7511)
 			     ADV7511_INT1_DDC_ERROR);
 	}
 
+
 	/*
 	 * Per spec it is allowed to pulse the HPD signal to indicate that the
 	 * EDID information has changed. Some monitors do this when they wakeup
@@ -362,11 +363,15 @@ static void adv7511_power_on(struct adv7511 *adv7511)
 
 	if (adv7511->type == ADV7533)
 		adv7533_dsi_power_on(adv7511);
+}
 
+static void adv7511_power_on(struct adv7511 *adv7511)
+{
+	__adv7511_power_on(adv7511);
 	adv7511->powered = true;
 }
 
-static void adv7511_power_off(struct adv7511 *adv7511)
+static void __adv7511_power_off(struct adv7511 *adv7511)
 {
 	/* TODO: setup additional power down modes */
 	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
@@ -376,7 +381,11 @@ static void adv7511_power_off(struct adv7511 *adv7511)
 
 	if (adv7511->type == ADV7533)
 		adv7533_dsi_power_off(adv7511);
+}
 
+static void adv7511_power_off(struct adv7511 *adv7511)
+{
+	__adv7511_power_off(adv7511);
 	adv7511->powered = false;
 }
 
@@ -545,24 +554,13 @@ static int adv7511_get_modes(struct adv7511 *adv7511,
 	unsigned int count;
 
 	/* Reading the EDID only works if the device is powered */
-	if (!adv7511->powered) {
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
-				   ADV7511_POWER_POWER_DOWN, 0);
-		if (adv7511->i2c_main->irq) {
-			regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
-				     ADV7511_INT0_EDID_READY);
-			regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
-				     ADV7511_INT1_DDC_ERROR);
-		}
-		adv7511->current_edid_segment = -1;
-	}
+	if (!adv7511->powered)
+		__adv7511_power_on(adv7511);
 
 	edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
 
 	if (!adv7511->powered)
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
-				   ADV7511_POWER_POWER_DOWN,
-				   ADV7511_POWER_POWER_DOWN);
+		__adv7511_power_off(adv7511);
 
 	kfree(adv7511->edid);
 	adv7511->edid = edid;
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ