[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9a3ad088c9fb9e533508563ad633aea6@agner.ch>
Date: Tue, 22 Nov 2016 13:56:46 -0800
From: Stefan Agner <stefan@...er.ch>
To: Lukasz Majewski <l.majewski@...ess.pl>
Cc: Thierry Reding <thierry.reding@...il.com>,
Sascha Hauer <s.hauer@...gutronix.de>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
linux-pwm@...r.kernel.org, linux-kernel@...r.kernel.org,
Fabio Estevam <fabio.estevam@....com>,
Fabio Estevam <festevam@...il.com>,
Lothar Wassmann <LW@...o-electronics.de>,
Bhuvanchandra DV <bhuvanchandra.dv@...adex.com>,
kernel@...gutronix.de
Subject: Re: [PATCH v3 06/11] pwm: imx: Move PWMv2 wait for fifo slot code to
a separate function
On 2016-11-01 00:10, Lukasz Majewski wrote:
> The code, which waits for fifo slot, has been extracted from
> imx_pwm_config_v2 function and moved to new one - imx_pwm_wait_fifo_slot().
>
> This change reduces the overall size of imx_pwm_config_v2() and prepares
> it for atomic PWM operation.
>
> Suggested-by: Stefan Agner <stefan@...er.ch>
> Suggested-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
> Signed-off-by: Lukasz Majewski <l.majewski@...ess.pl>
Reviewed-by: Stefan Agner <stefan@...er.ch>
> ---
> Changes for v3:
> - None
>
> Changes for v2:
> - None
> ---
> drivers/pwm/pwm-imx.c | 43 +++++++++++++++++++++++++------------------
> 1 file changed, 25 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
> index b4e5803..ebe9b0c 100644
> --- a/drivers/pwm/pwm-imx.c
> +++ b/drivers/pwm/pwm-imx.c
> @@ -137,18 +137,36 @@ static void imx_pwm_sw_reset(struct pwm_chip *chip)
> dev_warn(dev, "software reset timeout\n");
> }
>
> +static void imx_pwm_wait_fifo_slot(struct pwm_chip *chip,
> + struct pwm_device *pwm)
> +{
> + struct imx_chip *imx = to_imx_chip(chip);
> + struct device *dev = chip->dev;
> + unsigned int period_ms;
> + int fifoav;
> + u32 sr;
> +
> + sr = readl(imx->mmio_base + MX3_PWMSR);
> + fifoav = sr & MX3_PWMSR_FIFOAV_MASK;
> + if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
> + period_ms = DIV_ROUND_UP(pwm_get_period(pwm),
> + NSEC_PER_MSEC);
> + msleep(period_ms);
> +
> + sr = readl(imx->mmio_base + MX3_PWMSR);
> + if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK))
> + dev_warn(dev, "there is no free FIFO slot\n");
> + }
> +}
>
> static int imx_pwm_config_v2(struct pwm_chip *chip,
> struct pwm_device *pwm, int duty_ns, int period_ns)
> {
> struct imx_chip *imx = to_imx_chip(chip);
> - struct device *dev = chip->dev;
> unsigned long long c;
> unsigned long period_cycles, duty_cycles, prescale;
> - unsigned int period_ms;
> bool enable = pwm_is_enabled(pwm);
> - int fifoav;
> - u32 cr, sr;
> + u32 cr;
>
> /*
> * i.MX PWMv2 has a 4-word sample FIFO.
> @@ -157,21 +175,10 @@ static int imx_pwm_config_v2(struct pwm_chip *chip,
> * wait for a full PWM cycle to get a relinquished FIFO slot
> * when the controller is enabled and the FIFO is fully loaded.
> */
> - if (enable) {
> - sr = readl(imx->mmio_base + MX3_PWMSR);
> - fifoav = sr & MX3_PWMSR_FIFOAV_MASK;
> - if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
> - period_ms = DIV_ROUND_UP(pwm_get_period(pwm),
> - NSEC_PER_MSEC);
> - msleep(period_ms);
> -
> - sr = readl(imx->mmio_base + MX3_PWMSR);
> - if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK))
> - dev_warn(dev, "there is no free FIFO slot\n");
> - }
> - } else {
> + if (enable)
> + imx_pwm_wait_fifo_slot(chip, pwm);
> + else
> imx_pwm_sw_reset(chip);
> - }
>
> c = clk_get_rate(imx->clk_per);
> c = c * period_ns;
Powered by blists - more mailing lists