[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1479900044-19270-3-git-send-email-nicolas.saenz@prodys.net>
Date: Wed, 23 Nov 2016 12:20:44 +0100
From: Nicolas Saenz Julienne <nicolas.saenz@...dys.net>
To: sre@...nel.org, robh+dt@...nel.org, mark.rutland@....com
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-pm@...r.kernel.org, nicolas.saenz@...dys.net
Subject: [PATCH 2/2] dt-bindings: power: add bindings for sbs-charger
Adds device tree documentation for SBS charger compilant devices as defined
here: http://sbs-forum.org/specs/sbc110.pdf
Signed-off-by: Nicolas Saenz Julienne <nicolas.saenz@...dys.net>
---
.../bindings/power/supply/sbs_sbs-charger.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
new file mode 100644
index 0000000..b18ee2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
@@ -0,0 +1,22 @@
+SBS sbs-charger
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "sbs,sbs-charger"
+
+Optional properties :
+- interrupt-parent: Should be the phandle for the interrupt controller. Use in
+ conjunction with "interrupts".
+- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
+ "interrupt-parent". If an interrupt is not provided the driver will switch
+ automatically to polling.
+
+Example:
+
+ ltc4100@9 {
+ compatible = "sbs,sbs-charger";
+ reg = <0x9>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
--
2.7.4
Powered by blists - more mailing lists