lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <82cc855c7abb5d0583abe4cc9132c7e589434814.1479986492.git.viresh.kumar@linaro.org>
Date:   Thu, 24 Nov 2016 17:06:19 +0530
From:   Viresh Kumar <viresh.kumar@...aro.org>
To:     Rafael Wysocki <rjw@...ysocki.net>, nm@...com,
        sboyd@...eaurora.org, Viresh Kumar <vireshk@...nel.org>
Cc:     linaro-kernel@...ts.linaro.org, linux-pm@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Vincent Guittot <vincent.guittot@...aro.org>, robh@...nel.org,
        d-gerlach@...com, broonie@...nel.org, devicetree@...r.kernel.org,
        Viresh Kumar <viresh.kumar@...aro.org>
Subject: [PATCH V4 10/10] PM / OPP: Don't assume platform doesn't have regulators

If the regulators aren't set explicitly by the platform, the OPP core
assumes that the platform doesn't have any regulator and uses the
clk-only callback.

If the platform failed to register a regulator with the core, then this
can turn out to be a dangerous assumption as the OPP core will try to
change clk without changing regulators.

Handle that properly by making sure that the DT didn't have any entries
for supply voltages as well.

Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
 drivers/base/power/opp/core.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index d3f4c625b809..337057783e73 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -734,7 +734,20 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 
 	/* Only frequency scaling */
 	if (!regulators) {
+		unsigned long u_volt = opp->supplies[0].u_volt;
+
 		rcu_read_unlock();
+
+		/*
+		 * DT contained supply ratings? Consider platform failed to set
+		 * regulators.
+		 */
+		if (unlikely(u_volt)) {
+			dev_err(dev, "%s: Regulator not registered with OPP core\n",
+				__func__);
+			return -EINVAL;
+		}
+
 		return _generic_set_opp_clk_only(dev, clk, old_freq, freq);
 	}
 
-- 
2.7.1.410.g6faf27b

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ