| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20161124160558.GA31064@roeck-us.net>
Date: Thu, 24 Nov 2016 08:05:58 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Yang Ling <gnaygnil@...il.com>
Cc: Wim Van Sebroeck <wim@...ana.be>,
Keguang Zhang <keguang.zhang@...il.com>,
linux-kernel@...r.kernel.org, linux-watchdog@...r.kernel.org,
linux-mips@...ux-mips.org
Subject: Re: [v2.1,1/2] watchdog: loongson1: Add Loongson1 SoC watchdog driver
On Fri, Oct 21, 2016 at 01:45:39PM +0800, Yang Ling wrote:
> Add watchdog timer specific driver for Loongson1 SoC.
>
> Signed-off-by: Yang Ling <gnaygnil@...il.com>
First of all, sorry for the late reply. I'll try to do better next time.
> ---
> V2.1 from Kelvin Cheung:
> Use max_hw_heartbeat_ms instead of max_timeout.
> V2:
> Increase the value of the default heartbeat.
> Modify the setup process for register.
> Order include files and Makefile alphabetically.
> V1.1:
> Add a little debugging information.
> ---
> drivers/watchdog/Kconfig | 7 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/loongson1_wdt.c | 158 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 166 insertions(+)
> create mode 100644 drivers/watchdog/loongson1_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 50dbaa8..6707d43 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1513,6 +1513,13 @@ config LANTIQ_WDT
> help
> Hardware driver for the Lantiq SoC Watchdog Timer.
>
> +config LOONGSON1_WDT
> + tristate "Loongson1 SoC hardware watchdog"
> + depends on MACH_LOONGSON32
> + select WATCHDOG_CORE
> + help
> + Hardware driver for the Loongson1 SoC Watchdog Timer.
> +
> config RALINK_WDT
> tristate "Ralink SoC watchdog"
> select WATCHDOG_CORE
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index cba0043..b6a8d70 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -157,6 +157,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
> obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
> octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
> obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
> +obj-$(CONFIG_LOONGSON1_WDT) += loongson1_wdt.o
> obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
> obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
> obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
> diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c
> new file mode 100644
> index 0000000..f885294
> --- /dev/null
> +++ b/drivers/watchdog/loongson1_wdt.c
> @@ -0,0 +1,158 @@
> +/*
> + * Copyright (c) 2016 Yang Ling <gnaygnil@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/watchdog.h>
> +#include <loongson1.h>
> +
> +#define DEFAULT_HEARTBEAT 30
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0444);
> +
> +static unsigned int heartbeat = DEFAULT_HEARTBEAT;
> +module_param(heartbeat, uint, 0444);
> +
> +struct ls1x_wdt_drvdata {
> + void __iomem *base;
> + struct clk *clk;
> + unsigned int counts_per_second;
> + struct watchdog_device wdt;
> +};
> +
> +static int ls1x_wdt_ping(struct watchdog_device *wdt_dev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> +
> + writel(0x1, drvdata->base + WDT_SET);
> +
> + return 0;
> +}
> +
> +static int ls1x_wdt_set_timeout(struct watchdog_device *wdt_dev,
> + unsigned int timeout)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> + unsigned int counts;
> +
> + wdt_dev->timeout = min(timeout, wdt_dev->max_hw_heartbeat_ms / 1000);
wdt_dev->timeout needs to be set to the 'soft' timeout. The hardware timeout,
if needed, needs to be saved internally (in struct ls1x_wdt_drvdata).
Not that it is needed here, though - the value is not used elsewhere in the
driver. So you can do something like
wdt->timeout = timeout;
timeout = min(timeout, wdt_dev->max_hw_heartbeat_ms / 1000);
counts = drvdata->counts_per_second * timeout;
> + counts = drvdata->counts_per_second * wdt_dev->timeout;
> +
> + writel(counts, drvdata->base + WDT_TIMER);
> +
> + return 0;
> +}
> +
> +static int ls1x_wdt_start(struct watchdog_device *wdt_dev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> +
> + writel(0x1, drvdata->base + WDT_EN);
> +
> + return 0;
> +}
> +
> +static int ls1x_wdt_stop(struct watchdog_device *wdt_dev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> +
> + writel(0x0, drvdata->base + WDT_EN);
> +
> + return 0;
> +}
> +
> +static const struct watchdog_info ls1x_wdt_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "Loongson1 Watchdog",
> +};
> +
> +static const struct watchdog_ops ls1x_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = ls1x_wdt_start,
> + .stop = ls1x_wdt_stop,
> + .ping = ls1x_wdt_ping,
> + .set_timeout = ls1x_wdt_set_timeout,
> +};
> +
> +static int ls1x_wdt_probe(struct platform_device *pdev)
> +{
> + struct ls1x_wdt_drvdata *drvdata;
> + struct watchdog_device *ls1x_wdt;
> + struct resource *res;
> + int ret;
> +
> + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
> + if (!drvdata)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + drvdata->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(drvdata->base))
> + return PTR_ERR(drvdata->base);
> +
> + drvdata->clk = devm_clk_get(&pdev->dev, pdev->name);
> + if (IS_ERR(drvdata->clk)) {
> + dev_err(&pdev->dev, "failed to get %s clock\n", pdev->name);
devm_clk_get() can return -EPROBE_DEFER, in which case you would not want
an error message.
> + return PTR_ERR(drvdata->clk);
> + }
> + clk_prepare_enable(drvdata->clk);
> +
> + drvdata->counts_per_second = clk_get_rate(drvdata->clk);
clk_get_rate() can at least in theory return 0.
> +
> + ls1x_wdt = &drvdata->wdt;
> + ls1x_wdt->info = &ls1x_wdt_info;
> + ls1x_wdt->ops = &ls1x_wdt_ops;
> + ls1x_wdt->min_timeout = 1;
> + ls1x_wdt->max_hw_heartbeat_ms = U32_MAX / drvdata->counts_per_second *
> + 1000;
> + ls1x_wdt->parent = &pdev->dev;
> +
> + watchdog_init_timeout(ls1x_wdt, heartbeat, &pdev->dev);
This has little practical effect. Problem is two-fold. First, the default
heartbeat is not pre-set in ls1x_wdt. This means if the user specifies
heartbeat=0 as module parameter, the timeout will be set to 0. Second,
since heartbeat is -re-initialized, watchdog_init_timeout() will never fall
back to devicetree data to initialize the timeout (maybe that doesn't matter
for this architecture).
In general it is better to set the default module parameter value to 0
and initialize the timeout together with min_timeout and max_hw_heartbeat_ms.
static unsigned int heartbeat;
...
ls1x_wdt->timeout = DEFAULT_HEARTBEAT;
...
watchdog_init_timeout(ls1x_wdt, heartbeat, &pdev->dev);
> + watchdog_set_nowayout(ls1x_wdt, nowayout);
> + watchdog_set_drvdata(ls1x_wdt, drvdata);
> +
> + ret = watchdog_register_device(&drvdata->wdt);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to register watchdog device\n");
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, drvdata);
> +
> + dev_info(&pdev->dev, "Loongson1 Watchdog driver registered\n");
> +
> + return 0;
> +}
> +
> +static int ls1x_wdt_remove(struct platform_device *pdev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = platform_get_drvdata(pdev);
> +
> + ls1x_wdt_stop(&drvdata->wdt);
> + watchdog_unregister_device(&drvdata->wdt);
> + clk_disable_unprepare(drvdata->clk);
> +
> + return 0;
> +}
> +
> +static struct platform_driver ls1x_wdt_driver = {
> + .probe = ls1x_wdt_probe,
> + .remove = ls1x_wdt_remove,
> + .driver = {
> + .name = "ls1x-wdt",
> + },
> +};
> +
> +module_platform_driver(ls1x_wdt_driver);
> +
> +MODULE_AUTHOR("Yang Ling <gnaygnil@...il.com>");
> +MODULE_DESCRIPTION("Loongson1 Watchdog Driver");
> +MODULE_LICENSE("GPL");
Powered by blists - more mailing lists