| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4c3b7e44-3a20-e9a2-5edd-802d5488e605@st.com>
Date: Fri, 25 Nov 2016 09:09:30 +0100
From: Fabrice Gasnier <fabrice.gasnier@...com>
To: Jonathan Cameron <jic23@...nel.org>, <linux-iio@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <linux@...linux.org.uk>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <mcoquelin.stm32@...il.com>,
<alexandre.torgue@...com>, <lars@...afoo.de>, <knaack.h@....de>,
<pmeerw@...erw.net>
Subject: Re: [PATCH v3 2/6] iio: adc: Add support for STM32 ADC core
On 11/24/2016 09:40 PM, Jonathan Cameron wrote:
> On 21/11/16 08:54, Fabrice Gasnier wrote:
>> On 11/19/2016 01:17 PM, Jonathan Cameron wrote:
>>> On 15/11/16 15:30, Fabrice Gasnier wrote:
>>>> Add core driver for STMicroelectronics STM32 ADC (Analog to Digital
>>>> Converter). STM32 ADC can be composed of up to 3 ADCs with shared
>>>> resources like clock prescaler, common interrupt line and analog
>>>> reference voltage.
>>>> This core driver basically manages shared resources.
>>>>
>>>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
>>> There is nothing in here that demands selecting a fixed regulator.
>>> I've also switched the select regulator over to depends on inline with
>>> other drivers in IIO that have a hard dependency on regulators.
>>> Other than that which showed up during build tests, looks good to me.
>>> Shout if I've broken anything with this change.
>> Hi Jonathan, All,
>>
>> First many thanks.
>> This is not a big deal. Only thing is: I think patch 4 of this series (on stm32_defconfig) need to be updated
>> to accommodate this change. E.g. :
>> +CONFIG_REGULATOR=y
>> +CONFIG_REGULATOR_FIXED_VOLTAGE=y
>>
>> Shall I send a new version of this series (all patches), including your changes, with updated defconfig as well ?
>> Or only updated patch on defconfig is enough ?
> Just update those that haven't already been applied.
Hi,
I'll update these only.
Thanks,
Fabrice
>
> Thanks,
>
> Jonathan
>> Please advise,
>> Fabrice
>>> Applied to the togreg branch of iio.git and pushed out as testing for
>>> the autobuilders to play with it.
>>>
>>> Thanks,
>>>
>>> Jonathan
>>>> ---
>>>> drivers/iio/adc/Kconfig | 13 ++
>>>> drivers/iio/adc/Makefile | 1 +
>>>> drivers/iio/adc/stm32-adc-core.c | 303 +++++++++++++++++++++++++++++++++++++++
>>>> drivers/iio/adc/stm32-adc-core.h | 52 +++++++
>>>> 4 files changed, 369 insertions(+)
>>>> create mode 100644 drivers/iio/adc/stm32-adc-core.c
>>>> create mode 100644 drivers/iio/adc/stm32-adc-core.h
>>>>
>>>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>>>> index 7edcf32..ff30239 100644
>>>> --- a/drivers/iio/adc/Kconfig
>>>> +++ b/drivers/iio/adc/Kconfig
>>>> @@ -419,6 +419,19 @@ config ROCKCHIP_SARADC
>>>> To compile this driver as a module, choose M here: the
>>>> module will be called rockchip_saradc.
>>>> +config STM32_ADC_CORE
>>>> + tristate "STMicroelectronics STM32 adc core"
>>>> + depends on ARCH_STM32 || COMPILE_TEST
>>>> + depends on OF
>>>> + select REGULATOR
>>>> + select REGULATOR_FIXED_VOLTAGE
>>>> + help
>>>> + Select this option to enable the core driver for STMicroelectronics
>>>> + STM32 analog-to-digital converter (ADC).
>>>> +
>>>> + This driver can also be built as a module. If so, the module
>>>> + will be called stm32-adc-core.
>>>> +
>>>> config STX104
>>>> tristate "Apex Embedded Systems STX104 driver"
>>>> depends on X86 && ISA_BUS_API
>>>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>>>> index 7a40c04..a1e8f44 100644
>>>> --- a/drivers/iio/adc/Makefile
>>>> +++ b/drivers/iio/adc/Makefile
>>>> @@ -41,6 +41,7 @@ obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
>>>> obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
>>>> obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
>>>> obj-$(CONFIG_STX104) += stx104.o
>>>> +obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
>>>> obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
>>>> obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
>>>> obj-$(CONFIG_TI_ADC12138) += ti-adc12138.o
>>>> diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
>>>> new file mode 100644
>>>> index 0000000..4214b0c
>>>> --- /dev/null
>>>> +++ b/drivers/iio/adc/stm32-adc-core.c
>>>> @@ -0,0 +1,303 @@
>>>> +/*
>>>> + * This file is part of STM32 ADC driver
>>>> + *
>>>> + * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
>>>> + * Author: Fabrice Gasnier <fabrice.gasnier@...com>.
>>>> + *
>>>> + * Inspired from: fsl-imx25-tsadc
>>>> + *
>>>> + * License type: GPLv2
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify it
>>>> + * under the terms of the GNU General Public License version 2 as published by
>>>> + * the Free Software Foundation.
>>>> + *
>>>> + * This program is distributed in the hope that it will be useful, but
>>>> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
>>>> + * or FITNESS FOR A PARTICULAR PURPOSE.
>>>> + * See the GNU General Public License for more details.
>>>> + *
>>>> + * You should have received a copy of the GNU General Public License along with
>>>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>>>> + */
>>>> +
>>>> +#include <linux/clk.h>
>>>> +#include <linux/interrupt.h>
>>>> +#include <linux/irqchip/chained_irq.h>
>>>> +#include <linux/irqdesc.h>
>>>> +#include <linux/irqdomain.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/of_device.h>
>>>> +#include <linux/regulator/consumer.h>
>>>> +#include <linux/slab.h>
>>>> +
>>>> +#include "stm32-adc-core.h"
>>>> +
>>>> +/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
>>>> +#define STM32F4_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00)
>>>> +#define STM32F4_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x04)
>>>> +
>>>> +/* STM32F4_ADC_CSR - bit fields */
>>>> +#define STM32F4_EOC3 BIT(17)
>>>> +#define STM32F4_EOC2 BIT(9)
>>>> +#define STM32F4_EOC1 BIT(1)
>>>> +
>>>> +/* STM32F4_ADC_CCR - bit fields */
>>>> +#define STM32F4_ADC_ADCPRE_SHIFT 16
>>>> +#define STM32F4_ADC_ADCPRE_MASK GENMASK(17, 16)
>>>> +
>>>> +/* STM32 F4 maximum analog clock rate (from datasheet) */
>>>> +#define STM32F4_ADC_MAX_CLK_RATE 36000000
>>>> +
>>>> +/**
>>>> + * struct stm32_adc_priv - stm32 ADC core private data
>>>> + * @irq: irq for ADC block
>>>> + * @domain: irq domain reference
>>>> + * @aclk: clock reference for the analog circuitry
>>>> + * @vref: regulator reference
>>>> + * @common: common data for all ADC instances
>>>> + */
>>>> +struct stm32_adc_priv {
>>>> + int irq;
>>>> + struct irq_domain *domain;
>>>> + struct clk *aclk;
>>>> + struct regulator *vref;
>>>> + struct stm32_adc_common common;
>>>> +};
>>>> +
>>>> +static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com)
>>>> +{
>>>> + return container_of(com, struct stm32_adc_priv, common);
>>>> +}
>>>> +
>>>> +/* STM32F4 ADC internal common clock prescaler division ratios */
>>>> +static int stm32f4_pclk_div[] = {2, 4, 6, 8};
>>>> +
>>>> +/**
>>>> + * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
>>>> + * @priv: stm32 ADC core private data
>>>> + * Select clock prescaler used for analog conversions, before using ADC.
>>>> + */
>>>> +static int stm32f4_adc_clk_sel(struct platform_device *pdev,
>>>> + struct stm32_adc_priv *priv)
>>>> +{
>>>> + unsigned long rate;
>>>> + u32 val;
>>>> + int i;
>>>> +
>>>> + rate = clk_get_rate(priv->aclk);
>>>> + for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
>>>> + if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
>>>> + break;
>>>> + }
>>>> + if (i >= ARRAY_SIZE(stm32f4_pclk_div))
>>>> + return -EINVAL;
>>>> +
>>>> + val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR);
>>>> + val &= ~STM32F4_ADC_ADCPRE_MASK;
>>>> + val |= i << STM32F4_ADC_ADCPRE_SHIFT;
>>>> + writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR);
>>>> +
>>>> + dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n",
>>>> + rate / (stm32f4_pclk_div[i] * 1000));
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +/* ADC common interrupt for all instances */
>>>> +static void stm32_adc_irq_handler(struct irq_desc *desc)
>>>> +{
>>>> + struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
>>>> + struct irq_chip *chip = irq_desc_get_chip(desc);
>>>> + u32 status;
>>>> +
>>>> + chained_irq_enter(chip, desc);
>>>> + status = readl_relaxed(priv->common.base + STM32F4_ADC_CSR);
>>>> +
>>>> + if (status & STM32F4_EOC1)
>>>> + generic_handle_irq(irq_find_mapping(priv->domain, 0));
>>>> +
>>>> + if (status & STM32F4_EOC2)
>>>> + generic_handle_irq(irq_find_mapping(priv->domain, 1));
>>>> +
>>>> + if (status & STM32F4_EOC3)
>>>> + generic_handle_irq(irq_find_mapping(priv->domain, 2));
>>>> +
>>>> + chained_irq_exit(chip, desc);
>>>> +};
>>>> +
>>>> +static int stm32_adc_domain_map(struct irq_domain *d, unsigned int irq,
>>>> + irq_hw_number_t hwirq)
>>>> +{
>>>> + irq_set_chip_data(irq, d->host_data);
>>>> + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_level_irq);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static void stm32_adc_domain_unmap(struct irq_domain *d, unsigned int irq)
>>>> +{
>>>> + irq_set_chip_and_handler(irq, NULL, NULL);
>>>> + irq_set_chip_data(irq, NULL);
>>>> +}
>>>> +
>>>> +static const struct irq_domain_ops stm32_adc_domain_ops = {
>>>> + .map = stm32_adc_domain_map,
>>>> + .unmap = stm32_adc_domain_unmap,
>>>> + .xlate = irq_domain_xlate_onecell,
>>>> +};
>>>> +
>>>> +static int stm32_adc_irq_probe(struct platform_device *pdev,
>>>> + struct stm32_adc_priv *priv)
>>>> +{
>>>> + struct device_node *np = pdev->dev.of_node;
>>>> +
>>>> + priv->irq = platform_get_irq(pdev, 0);
>>>> + if (priv->irq < 0) {
>>>> + dev_err(&pdev->dev, "failed to get irq\n");
>>>> + return priv->irq;
>>>> + }
>>>> +
>>>> + priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
>>>> + &stm32_adc_domain_ops,
>>>> + priv);
>>>> + if (!priv->domain) {
>>>> + dev_err(&pdev->dev, "Failed to add irq domain\n");
>>>> + return -ENOMEM;
>>>> + }
>>>> +
>>>> + irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
>>>> + irq_set_handler_data(priv->irq, priv);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static void stm32_adc_irq_remove(struct platform_device *pdev,
>>>> + struct stm32_adc_priv *priv)
>>>> +{
>>>> + int hwirq;
>>>> +
>>>> + for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
>>>> + irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
>>>> + irq_domain_remove(priv->domain);
>>>> + irq_set_chained_handler(priv->irq, NULL);
>>>> +}
>>>> +
>>>> +static int stm32_adc_probe(struct platform_device *pdev)
>>>> +{
>>>> + struct stm32_adc_priv *priv;
>>>> + struct device_node *np = pdev->dev.of_node;
>>>> + struct resource *res;
>>>> + int ret;
>>>> +
>>>> + if (!pdev->dev.of_node)
>>>> + return -ENODEV;
>>>> +
>>>> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>>>> + if (!priv)
>>>> + return -ENOMEM;
>>>> +
>>>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>> + priv->common.base = devm_ioremap_resource(&pdev->dev, res);
>>>> + if (IS_ERR(priv->common.base))
>>>> + return PTR_ERR(priv->common.base);
>>>> +
>>>> + priv->vref = devm_regulator_get(&pdev->dev, "vref");
>>>> + if (IS_ERR(priv->vref)) {
>>>> + ret = PTR_ERR(priv->vref);
>>>> + dev_err(&pdev->dev, "vref get failed, %d\n", ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + ret = regulator_enable(priv->vref);
>>>> + if (ret < 0) {
>>>> + dev_err(&pdev->dev, "vref enable failed\n");
>>>> + return ret;
>>>> + }
>>>> +
>>>> + ret = regulator_get_voltage(priv->vref);
>>>> + if (ret < 0) {
>>>> + dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret);
>>>> + goto err_regulator_disable;
>>>> + }
>>>> + priv->common.vref_mv = ret / 1000;
>>>> + dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv);
>>>> +
>>>> + priv->aclk = devm_clk_get(&pdev->dev, "adc");
>>>> + if (IS_ERR(priv->aclk)) {
>>>> + ret = PTR_ERR(priv->aclk);
>>>> + dev_err(&pdev->dev, "Can't get 'adc' clock\n");
>>>> + goto err_regulator_disable;
>>>> + }
>>>> +
>>>> + ret = clk_prepare_enable(priv->aclk);
>>>> + if (ret < 0) {
>>>> + dev_err(&pdev->dev, "adc clk enable failed\n");
>>>> + goto err_regulator_disable;
>>>> + }
>>>> +
>>>> + ret = stm32f4_adc_clk_sel(pdev, priv);
>>>> + if (ret < 0) {
>>>> + dev_err(&pdev->dev, "adc clk selection failed\n");
>>>> + goto err_clk_disable;
>>>> + }
>>>> +
>>>> + ret = stm32_adc_irq_probe(pdev, priv);
>>>> + if (ret < 0)
>>>> + goto err_clk_disable;
>>>> +
>>>> + platform_set_drvdata(pdev, &priv->common);
>>>> +
>>>> + ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
>>>> + if (ret < 0) {
>>>> + dev_err(&pdev->dev, "failed to populate DT children\n");
>>>> + goto err_irq_remove;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +
>>>> +err_irq_remove:
>>>> + stm32_adc_irq_remove(pdev, priv);
>>>> +
>>>> +err_clk_disable:
>>>> + clk_disable_unprepare(priv->aclk);
>>>> +
>>>> +err_regulator_disable:
>>>> + regulator_disable(priv->vref);
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static int stm32_adc_remove(struct platform_device *pdev)
>>>> +{
>>>> + struct stm32_adc_common *common = platform_get_drvdata(pdev);
>>>> + struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
>>>> +
>>>> + of_platform_depopulate(&pdev->dev);
>>>> + stm32_adc_irq_remove(pdev, priv);
>>>> + clk_disable_unprepare(priv->aclk);
>>>> + regulator_disable(priv->vref);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static const struct of_device_id stm32_adc_of_match[] = {
>>>> + { .compatible = "st,stm32f4-adc-core" },
>>>> + {},
>>>> +};
>>>> +MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
>>>> +
>>>> +static struct platform_driver stm32_adc_driver = {
>>>> + .probe = stm32_adc_probe,
>>>> + .remove = stm32_adc_remove,
>>>> + .driver = {
>>>> + .name = "stm32-adc-core",
>>>> + .of_match_table = stm32_adc_of_match,
>>>> + },
>>>> +};
>>>> +module_platform_driver(stm32_adc_driver);
>>>> +
>>>> +MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@...com>");
>>>> +MODULE_DESCRIPTION("STMicroelectronics STM32 ADC core driver");
>>>> +MODULE_LICENSE("GPL v2");
>>>> +MODULE_ALIAS("platform:stm32-adc-core");
>>>> diff --git a/drivers/iio/adc/stm32-adc-core.h b/drivers/iio/adc/stm32-adc-core.h
>>>> new file mode 100644
>>>> index 0000000..081fa5f
>>>> --- /dev/null
>>>> +++ b/drivers/iio/adc/stm32-adc-core.h
>>>> @@ -0,0 +1,52 @@
>>>> +/*
>>>> + * This file is part of STM32 ADC driver
>>>> + *
>>>> + * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
>>>> + * Author: Fabrice Gasnier <fabrice.gasnier@...com>.
>>>> + *
>>>> + * License type: GPLv2
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify it
>>>> + * under the terms of the GNU General Public License version 2 as published by
>>>> + * the Free Software Foundation.
>>>> + *
>>>> + * This program is distributed in the hope that it will be useful, but
>>>> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
>>>> + * or FITNESS FOR A PARTICULAR PURPOSE.
>>>> + * See the GNU General Public License for more details.
>>>> + *
>>>> + * You should have received a copy of the GNU General Public License along with
>>>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>>>> + */
>>>> +
>>>> +#ifndef __STM32_ADC_H
>>>> +#define __STM32_ADC_H
>>>> +
>>>> +/*
>>>> + * STM32 - ADC global register map
>>>> + * ________________________________________________________
>>>> + * | Offset | Register |
>>>> + * --------------------------------------------------------
>>>> + * | 0x000 | Master ADC1 |
>>>> + * --------------------------------------------------------
>>>> + * | 0x100 | Slave ADC2 |
>>>> + * --------------------------------------------------------
>>>> + * | 0x200 | Slave ADC3 |
>>>> + * --------------------------------------------------------
>>>> + * | 0x300 | Master & Slave common regs |
>>>> + * --------------------------------------------------------
>>>> + */
>>>> +#define STM32_ADC_MAX_ADCS 3
>>>> +#define STM32_ADCX_COMN_OFFSET 0x300
>>>> +
>>>> +/**
>>>> + * struct stm32_adc_common - stm32 ADC driver common data (for all instances)
>>>> + * @base: control registers base cpu addr
>>>> + * @vref_mv: vref voltage (mv)
>>>> + */
>>>> +struct stm32_adc_common {
>>>> + void __iomem *base;
>>>> + int vref_mv;
>>>> +};
>>>> +
>>>> +#endif
>>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists