| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1480183585-592-34-git-send-email-yamada.masahiro@socionext.com>
Date: Sun, 27 Nov 2016 03:06:19 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: linux-mtd@...ts.infradead.org
Cc: Masahiro Yamada <yamada.masahiro@...ionext.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Marek Vasut <marek.vasut@...il.com>,
Brian Norris <computersforpeace@...il.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Cyrille Pitchen <cyrille.pitchen@...el.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Subject: [PATCH 33/39] mtd: nand: denali: support 1024 byte ECC step size
This driver was originally written for the Intel MRST platform with
several platform specific parameters hard-coded. Another thing we
need to fix is the hard-coded ECC step size. Currently, it is
defined as follows:
#define ECC_SECTOR_SIZE 512
(somehow, it is defined in both denali.c and denali.h)
This must be avoided because the Denali IP supports 1024 byte ECC
size as well. Add a new flag DENALI_CAPS_ECC_SIZE_1024. If it is
specified, ecc.size is set to 1024, otherwise set to 512.
We can use "nand-ecc-step-size" DT property to override the ecc.size
if we want, but this capability flag can provide the reasonable
default because it is associated with the DT compatible strings.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
.../devicetree/bindings/mtd/denali-nand.txt | 4 ++++
drivers/mtd/nand/denali.c | 26 +++++++++++-----------
drivers/mtd/nand/denali.h | 3 +--
3 files changed, 18 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
index 603110b..e9d5818 100644
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -6,6 +6,10 @@ Required properties:
- reg-names: Should contain the reg names "nand_data" and "denali_reg"
- interrupts : The interrupt number.
+Optional properties:
+ - nand-ecc-step-size: must be 512 or 1024. If not specified, default to 512.
+ see nand.txt for details.
+
The device tree may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 63f7500..5d80f16 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -894,8 +894,6 @@ static bool denali_hw_ecc_fixup(struct denali_nand_info *denali,
return false;
}
-#define ECC_SECTOR_SIZE 512
-
#define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
#define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET))
#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
@@ -908,6 +906,7 @@ static bool denali_sw_ecc_fixup(struct denali_nand_info *denali, u8 *buf,
{
bool check_erased_page = false;
unsigned int bitflips = 0;
+ unsigned int ecc_size = denali->nand.ecc.size;
u32 err_address, err_correction_info, err_byte, err_sector, err_device,
err_correction_value;
@@ -930,18 +929,18 @@ static bool denali_sw_ecc_fixup(struct denali_nand_info *denali, u8 *buf,
if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
/*
- * If err_byte is larger than ECC_SECTOR_SIZE, means error
+ * If err_byte is larger than ecc_size, means error
* happened in OOB, so we ignore it. It's no need for
* us to correct it err_device is represented the NAND
* error bits are happened in if there are more than
* one NAND connected.
*/
- if (err_byte < ECC_SECTOR_SIZE) {
+ if (err_byte < ecc_size) {
struct mtd_info *mtd =
nand_to_mtd(&denali->nand);
int offset;
- offset = (err_sector * ECC_SECTOR_SIZE + err_byte) *
+ offset = (err_sector * ecc_size + err_byte) *
denali->devnum + err_device;
/* correct the ECC error */
buf[offset] ^= err_correction_value;
@@ -1590,22 +1589,25 @@ int denali_init(struct denali_nand_info *denali)
/* no subpage writes on denali */
chip->options |= NAND_NO_SUBPAGE_WRITE;
+ /* If "nand-ecc-step-size" DT property is specified, respect it */
+ if (!chip->ecc.size)
+ chip->ecc.size = denali->caps & DENALI_CAPS_ECC_SIZE_1024 ?
+ 1024 : 512;
+
/*
* Denali Controller only support 15bit and 8bit ECC in MRST,
* so just let controller do 15bit ECC for MLC and 8bit ECC for
* SLC if possible.
* */
if (!nand_is_slc(chip) &&
- (mtd->oobsize > (denali->bbtskipbytes +
- ECC_15BITS * (mtd->writesize /
- ECC_SECTOR_SIZE)))) {
+ mtd->oobsize > denali->bbtskipbytes +
+ ECC_15BITS * (mtd->writesize / chip->ecc.size)) {
/* if MLC OOB size is large enough, use 15bit ECC*/
chip->ecc.strength = 15;
chip->ecc.bytes = ECC_15BITS;
iowrite32(15, denali->flash_reg + ECC_CORRECTION);
- } else if (mtd->oobsize < (denali->bbtskipbytes +
- ECC_8BITS * (mtd->writesize /
- ECC_SECTOR_SIZE))) {
+ } else if (mtd->oobsize <
+ denali->bbtskipbytes + ECC_8BITS * (mtd->writesize / chip->ecc.size)) {
pr_err("Your NAND chip OOB is not large enough to contain 8bit ECC correction codes");
goto failed_req_irq;
} else {
@@ -1616,8 +1618,6 @@ int denali_init(struct denali_nand_info *denali)
mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
- /* override the default read operations */
- chip->ecc.size = ECC_SECTOR_SIZE;
chip->ecc.read_page = denali_read_page;
chip->ecc.read_page_raw = denali_read_page_raw;
chip->ecc.write_page = denali_write_page;
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index d621b74..5209625 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -396,8 +396,6 @@
#define MODE_10 0x08000000
#define MODE_11 0x0C000000
-#define ECC_SECTOR_SIZE 512
-
struct nand_buf {
int head;
int tail;
@@ -434,6 +432,7 @@ struct denali_nand_info {
#define DENALI_CAPS_HW_ECC_FIXUP BIT(0)
#define DENALI_CAPS_DMA_64BIT BIT(1)
#define DENALI_CAPS_NEW_N_BANKS_FORMAT BIT(2)
+#define DENALI_CAPS_ECC_SIZE_1024 BIT(3)
};
extern int denali_init(struct denali_nand_info *denali);
--
2.7.4
Powered by blists - more mailing lists