[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1480351226-3332-1-git-send-email-david@lechnology.com>
Date: Mon, 28 Nov 2016 10:40:23 -0600
From: David Lechner <david@...hnology.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sekhar Nori <nsekhar@...com>, Kevin Hilman <khilman@...nel.org>
Cc: David Lechner <david@...hnology.com>, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Axel Haslam <ahaslam@...libre.com>,
Alexandre Bailon <abailon@...libre.com>,
Bartosz Gołaszewski <bgolaszewski@...libre.com>
Subject: [PATCH v2 0/3] TI DA850/OMAP-L138/AM18x pinconf
This series adds a new driver and DT bindings for TI DA850/OMAP-L138/AM18x
pinconf (bias pullup/pulldown).
The motivation for this series is LEGO MINDSTORMS EV3 support. It needs most,
if not all, internal pullup/down resistors disabled in order to work correctly.
v2 changes:
* s/DA8XX/DA850/ in the commit messages
* Fix `get_get` typo in pinctrl-da850-pupd.c
* Moved pin-controller@...00c device node in da850.dtsi
David Lechner (3):
devicetree: bindings: pinctrl: Add binding for ti,da850-pupd
pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf
ARM: dts: da850: Add node for pullup/pulldown pinconf
.../devicetree/bindings/pinctrl/ti,da850-pupd.txt | 55 ++++++
arch/arm/boot/dts/da850.dtsi | 5 +
drivers/pinctrl/Kconfig | 9 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-da850-pupd.c | 210 +++++++++++++++++++++
5 files changed, 280 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt
create mode 100644 drivers/pinctrl/pinctrl-da850-pupd.c
--
2.7.4
Powered by blists - more mailing lists