| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1480351226-3332-3-git-send-email-david@lechnology.com>
Date: Mon, 28 Nov 2016 10:40:25 -0600
From: David Lechner <david@...hnology.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sekhar Nori <nsekhar@...com>, Kevin Hilman <khilman@...nel.org>
Cc: David Lechner <david@...hnology.com>, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Axel Haslam <ahaslam@...libre.com>,
Alexandre Bailon <abailon@...libre.com>,
Bartosz Gołaszewski <bgolaszewski@...libre.com>
Subject: [PATCH v2 2/3] pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf
This adds a new driver for pinconf on TI DA850/OMAP-L138/AM18XX. These
SoCs have a separate controller for controlling pullup/pulldown groups.
Signed-off-by: David Lechner <david@...hnology.com>
Reviewed-by: Sekhar Nori <nsekhar@...com>
---
v2 changes:
* s/DA8XX/DA850/ in the commit messages
* Fix `get_get` typo in two function names
drivers/pinctrl/Kconfig | 9 ++
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-da850-pupd.c | 210 +++++++++++++++++++++++++++++++++++
3 files changed, 220 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-da850-pupd.c
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 5f40ad6..54044a8 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -93,6 +93,15 @@ config PINCTRL_AMD
Requires ACPI/FDT device enumeration code to set up a platform
device.
+config PINCTRL_DA850_PUPD
+ tristate "TI DA850/OMAP-L138/AM18XX pullup/pulldown groups"
+ depends on OF && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
+ select PINCONF
+ select GENERIC_PINCONF
+ help
+ Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control
+ pullup/pulldown pin groups.
+
config PINCTRL_DIGICOLOR
bool
depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST)
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 3b8e6f7..25d50a8 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_PINCTRL_BF60x) += pinctrl-adi2-bf60x.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o
obj-$(CONFIG_PINCTRL_AMD) += pinctrl-amd.o
+obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
obj-$(CONFIG_PINCTRL_DIGICOLOR) += pinctrl-digicolor.o
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
obj-$(CONFIG_PINCTRL_MAX77620) += pinctrl-max77620.o
diff --git a/drivers/pinctrl/pinctrl-da850-pupd.c b/drivers/pinctrl/pinctrl-da850-pupd.c
new file mode 100644
index 0000000..b36a90a
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-da850-pupd.c
@@ -0,0 +1,210 @@
+/*
+ * Pinconf driver for TI DA850/OMAP-L138/AM18XX pullup/pulldown groups
+ *
+ * Copyright (C) 2016 David Lechner
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+
+#define DA850_PUPD_ENA 0x00
+#define DA850_PUPD_SEL 0x04
+
+struct da850_pupd_data {
+ void __iomem *base;
+ struct pinctrl_desc desc;
+ struct pinctrl_dev *pinctrl;
+};
+
+static const char * const da850_pupd_group_names[] = {
+ "cp0", "cp1", "cp2", "cp3", "cp4", "cp5", "cp6", "cp7",
+ "cp8", "cp9", "cp10", "cp11", "cp12", "cp13", "cp14", "cp15",
+ "cp16", "cp17", "cp18", "cp19", "cp20", "cp21", "cp22", "cp23",
+ "cp24", "cp25", "cp26", "cp27", "cp28", "cp29", "cp30", "cp31",
+};
+
+static int da850_pupd_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(da850_pupd_group_names);
+}
+
+static const char *da850_pupd_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ return da850_pupd_group_names[selector];
+}
+
+static int da850_pupd_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ const unsigned int **pins,
+ unsigned int *num_pins)
+{
+ *num_pins = 0;
+
+ return 0;
+}
+
+static const struct pinctrl_ops da850_pupd_pctlops = {
+ .get_groups_count = da850_pupd_get_groups_count,
+ .get_group_name = da850_pupd_get_group_name,
+ .get_group_pins = da850_pupd_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_group,
+ .dt_free_map = pinconf_generic_dt_free_map,
+};
+
+static int da850_pupd_pin_config_group_get(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ unsigned long *config)
+{
+ struct da850_pupd_data *data = pinctrl_dev_get_drvdata(pctldev);
+ enum pin_config_param param = pinconf_to_config_param(*config);
+ u32 val;
+ u16 arg;
+
+ val = readl(data->base + DA850_PUPD_ENA);
+ arg = !!(~val & BIT(selector));
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ if (arg) {
+ /* bias is disabled */
+ arg = 0;
+ break;
+ }
+ val = readl(data->base + DA850_PUPD_SEL);
+ if (param == PIN_CONFIG_BIAS_PULL_DOWN)
+ val = ~val;
+ arg = !!(val & BIT(selector));
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *config = pinconf_to_config_packed(param, arg);
+
+ return 0;
+}
+
+static int da850_pupd_pin_config_group_set(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ unsigned long *configs,
+ unsigned int num_configs)
+{
+ struct da850_pupd_data *data = pinctrl_dev_get_drvdata(pctldev);
+ u32 ena, sel;
+ enum pin_config_param param;
+ u16 arg;
+ int i;
+
+ ena = readl(data->base + DA850_PUPD_ENA);
+ sel = readl(data->base + DA850_PUPD_SEL);
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ ena &= ~BIT(selector);
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ ena |= BIT(selector);
+ sel |= BIT(selector);
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ ena |= BIT(selector);
+ sel &= ~BIT(selector);
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ writel(sel, data->base + DA850_PUPD_SEL);
+ writel(ena, data->base + DA850_PUPD_ENA);
+
+ return 0;
+}
+
+static const struct pinconf_ops da850_pupd_confops = {
+ .is_generic = true,
+ .pin_config_group_get = da850_pupd_pin_config_group_get,
+ .pin_config_group_set = da850_pupd_pin_config_group_set,
+};
+
+static int da850_pupd_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct da850_pupd_data *data;
+ struct resource *res;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(data->base)) {
+ dev_err(dev, "Could not map resource\n");
+ return PTR_ERR(data->base);
+ }
+
+ data->desc.name = dev_name(dev);
+ data->desc.pctlops = &da850_pupd_pctlops;
+ data->desc.confops = &da850_pupd_confops;
+ data->desc.owner = THIS_MODULE;
+
+ data->pinctrl = devm_pinctrl_register(dev, &data->desc, data);
+ if (IS_ERR(data->pinctrl)) {
+ dev_err(dev, "Failed to register pinctrl\n");
+ return PTR_ERR(data->pinctrl);
+ }
+
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+}
+
+static int da850_pupd_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static const struct of_device_id da850_pupd_of_match[] = {
+ { .compatible = "ti,da850-pupd" },
+ { }
+};
+
+static struct platform_driver da850_pupd_driver = {
+ .driver = {
+ .name = "ti-da850-pupd",
+ .of_match_table = da850_pupd_of_match,
+ },
+ .probe = da850_pupd_probe,
+ .remove = da850_pupd_remove,
+};
+module_platform_driver(da850_pupd_driver);
+
+MODULE_AUTHOR("David Lechner <david@...hnology.com>");
+MODULE_DESCRIPTION("TI DA850/OMAP-L138/AM18XX pullup/pulldown configuration");
+MODULE_LICENSE("GPL");
--
2.7.4
Powered by blists - more mailing lists