| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1480431651-6081-4-git-send-email-ivan.khoronzhuk@linaro.org>
Date: Tue, 29 Nov 2016 17:00:49 +0200
From: Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
To: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
mugunthanvnm@...com, grygorii.strashko@...com
Cc: linux-omap@...r.kernel.org,
Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
Subject: [PATCH 3/5] net: ethernet: ti: cpsw: add .ndo to set per-queue rate
This patch allows to rate limit queues tx queues for cpsw interface.
The rate is set in absolute Mb/s units and cannot be more a speed
an interface is connected with.
The rate for a tx queue can be tested with:
ethtool -L eth0 rx 4 tx 4
echo 100 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
echo 200 > /sys/class/net/eth0/queues/tx-1/tx_maxrate
echo 50 > /sys/class/net/eth0/queues/tx-2/tx_maxrate
echo 30 > /sys/class/net/eth0/queues/tx-3/tx_maxrate
tc qdisc add dev eth0 root handle 1: multiq
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\
dport 5001 0xffff action skbedit queue_mapping 0
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\
dport 5002 0xffff action skbedit queue_mapping 1
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\
dport 5003 0xffff action skbedit queue_mapping 2
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\
dport 5004 0xffff action skbedit queue_mapping 3
iperf -c 192.168.2.1 -b 110M -p 5001 -f m -t 60
iperf -c 192.168.2.1 -b 215M -p 5002 -f m -t 60
iperf -c 192.168.2.1 -b 55M -p 5003 -f m -t 60
iperf -c 192.168.2.1 -b 32M -p 5004 -f m -t 60
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
---
drivers/net/ethernet/ti/cpsw.c | 87 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index da40ea5..c102675 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1872,6 +1872,88 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev,
return ret;
}
+static int cpsw_ndo_set_tx_maxrate(struct net_device *ndev, int queue, u32 rate)
+{
+ struct cpsw_priv *priv = netdev_priv(ndev);
+ int tx_ch_num = ndev->real_num_tx_queues;
+ u32 consumed_rate, min_rate, max_rate;
+ struct cpsw_common *cpsw = priv->cpsw;
+ struct cpsw_slave *slave;
+ int ret, i, weight;
+ int rlim_num = 0;
+ u32 ch_rate;
+
+ ch_rate = netdev_get_tx_queue(ndev, queue)->tx_maxrate;
+ if (ch_rate == rate)
+ return 0;
+
+ if (cpsw->data.dual_emac)
+ slave = &cpsw->slaves[priv->emac_port];
+ else
+ slave = &cpsw->slaves[cpsw->data.active_slave];
+ max_rate = slave->phy->speed;
+
+ consumed_rate = 0;
+ for (i = 0; i < tx_ch_num; i++) {
+ if (i == queue)
+ ch_rate = rate;
+ else
+ ch_rate = netdev_get_tx_queue(ndev, i)->tx_maxrate;
+
+ if (!ch_rate)
+ continue;
+
+ rlim_num++;
+ consumed_rate += ch_rate;
+ }
+
+ if (consumed_rate > max_rate)
+ dev_info(priv->dev, "The common rate shouldn't be more than %dMbps",
+ max_rate);
+
+ if (consumed_rate > max_rate) {
+ if (max_rate == 10 && consumed_rate <= 100) {
+ max_rate = 100;
+ } else if (max_rate <= 100 && consumed_rate <= 1000) {
+ max_rate = 1000;
+ } else {
+ dev_err(priv->dev, "The common rate cannot be more than %dMbps",
+ max_rate);
+ return -EINVAL;
+ }
+ }
+
+ if (consumed_rate > max_rate) {
+ dev_err(priv->dev, "The common rate cannot be more than %dMbps",
+ max_rate);
+ return -EINVAL;
+ }
+
+ rate *= 1000;
+ min_rate = cpdma_chan_get_min_rate(cpsw->dma);
+ if ((rate < min_rate && rate)) {
+ dev_err(priv->dev, "The common rate cannot be less than %dMbps",
+ min_rate);
+ return -EINVAL;
+ }
+
+ ret = pm_runtime_get_sync(cpsw->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(cpsw->dev);
+ return ret;
+ }
+
+ if (rlim_num == tx_ch_num)
+ max_rate = consumed_rate;
+
+ weight = (rate * 100) / (max_rate * 1000);
+ cpdma_chan_set_weight(cpsw->txch[queue], weight);
+
+ ret = cpdma_chan_set_rate(cpsw->txch[queue], rate);
+ pm_runtime_put(cpsw->dev);
+ return ret;
+}
+
static const struct net_device_ops cpsw_netdev_ops = {
.ndo_open = cpsw_ndo_open,
.ndo_stop = cpsw_ndo_stop,
@@ -1881,6 +1963,7 @@ static const struct net_device_ops cpsw_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = cpsw_ndo_tx_timeout,
.ndo_set_rx_mode = cpsw_ndo_set_rx_mode,
+ .ndo_set_tx_maxrate = cpsw_ndo_set_tx_maxrate,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = cpsw_ndo_poll_controller,
#endif
@@ -2100,6 +2183,7 @@ static int cpsw_update_channels_res(struct cpsw_priv *priv, int ch_num, int rx)
int (*poll)(struct napi_struct *, int);
struct cpsw_common *cpsw = priv->cpsw;
void (*handler)(void *, int, int);
+ struct netdev_queue *queue;
struct cpdma_chan **chan;
int ret, *ch;
@@ -2117,6 +2201,8 @@ static int cpsw_update_channels_res(struct cpsw_priv *priv, int ch_num, int rx)
while (*ch < ch_num) {
chan[*ch] = cpdma_chan_create(cpsw->dma, *ch, handler, rx);
+ queue = netdev_get_tx_queue(priv->ndev, *ch);
+ queue->tx_maxrate = 0;
if (IS_ERR(chan[*ch]))
return PTR_ERR(chan[*ch]);
@@ -2752,6 +2838,7 @@ static int cpsw_probe(struct platform_device *pdev)
dma_params.desc_align = 16;
dma_params.has_ext_regs = true;
dma_params.desc_hw_addr = dma_params.desc_mem_phys;
+ dma_params.bus_freq_mhz = cpsw->bus_freq_mhz;
cpsw->dma = cpdma_ctlr_create(&dma_params);
if (!cpsw->dma) {
--
2.7.4
Powered by blists - more mailing lists