[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <583E8F73.2060804@samsung.com>
Date: Wed, 30 Nov 2016 17:36:03 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: Seung-Woo Kim <sw0312.kim@...sung.com>,
linux-samsung-soc@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, robh+dt@...nel.org,
mark.rutland@....com, catalin.marinas@....com, will.deacon@....com,
kgene@...nel.org, krzk@...nel.org, javier@....samsung.com,
Ingi Kim <ingi2.kim@...sung.com>
Subject: Re: [PATCH v2] arm64: dts: exynos: Add flash led dt node for TM2 board
Dear Seung-Woo,
I think that this patch looks good to me.
But, When I tested this patch on my TM2 board,
the flash turn off after some millisecond automatically.
It is strange situation. Unfortunately, I don't know the cause.
I think that we better to check this issue for more time.
Best Regards,
Chanwoo Choi
On 2016년 11월 30일 13:48, Seung-Woo Kim wrote:
> From: Ingi Kim <ingi2.kim@...sung.com>
>
> This patch adds Kinetic ktd2692 flash led device node for TM2 board.
>
> Signed-off-by: Ingi Kim <ingi2.kim@...sung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@...sung.com>
> ---
> Change from v1:
> - gpio active value is set with defined macro instead of value.
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 13 +++++++++++++
> 1 files changed, 13 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> index f21bdc2..0d454aa 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -58,6 +58,19 @@
> reg = <0x0 0x20000000 0x0 0xc0000000>;
> };
>
> + camera-flash {
> + compatible = "kinetic,ktd2692";
> + ctrl-gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
> + aux-gpios = <&gpc0 2 GPIO_ACTIVE_HIGH>;
> +
> + flash-led {
> + label = "ktd2692-flash";
> + led-max-microamp = <300000>;
> + flash-max-microamp = <1500000>;
> + flash-max-timeout-us = <1835000>;
> + };
> + };
> +
> gpio-keys {
> compatible = "gpio-keys";
>
>
Powered by blists - more mailing lists