[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <2de74f6d2f2689b8ef090a9017db2ffb3bd319cb.1480467185.git.stillcompiling@gmail.com>
Date: Tue, 29 Nov 2016 17:11:04 -0800
From: Joshua Clayton <stillcompiling@...il.com>
To: Alan Tull <atull@...nsource.altera.com>,
Moritz Fischer <moritz.fischer@...us.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
Joshua Clayton <stillcompiling@...il.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v3 2/3] doc: dt: add cyclone-spi binding document
Describe a cyclonei-ps-spi devicetree entry, required features
Signed-off-by: Joshua Clayton <stillcompiling@...il.com>
---
.../bindings/fpga/cyclone-ps-spi-fpga-mgr.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt
diff --git a/Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt
new file mode 100644
index 0000000..c942281
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt
@@ -0,0 +1,23 @@
+Altera Cyclone Passive Serial SPI FPGA Manager
+
+Altera Cyclone FPGAs support a method of loading the bitstream over what is
+referred to as "passive serial".
+The passive serial link is not technically spi, and might require extra
+circuits in order to play nicely with other spi slaves on the same bus.
+
+See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
+
+Required properties:
+- compatible : should contain "altr,cyclone-ps-spi-fpga-mgr"
+- reg : spi slave id of the fpga
+- config-gpio : config pin (referred to as nCONFIG in the cyclone manual)
+- status-gpio : status pin (referred to as nSTATUS in the cyclone manual)
+
+Example:
+ fpga_spi: evi-fpga-spi@0 {
+ compatible = "altr,cyclone-ps-spi-fpga-mgr";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ config-gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+ status-gpio = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+ };
--
2.9.3
Powered by blists - more mailing lists