linux-kernel - [PATCH v6 2/5] mtd: ubi: use 'max_bad_blocks' to compute bad_peb

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1480525051-4991-3-git-send-email-zach.brown@ni.com>
Date:   Wed, 30 Nov 2016 10:57:28 -0600
From:   Zach Brown <zach.brown@...com>
To:     <dwmw2@...radead.org>
CC:     <computersforpeace@...il.com>,
        <boris.brezillon@...e-electrons.com>, <richard@....at>,
        <dedekind1@...il.com>, <linux-mtd@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v6 2/5] mtd: ubi: use 'max_bad_blocks' to compute bad_peb_limit if available

From: Jeff Westfahl <jeff.westfahl@...com>

If the user has not set max_beb_per1024 using either the cmdline or
Kconfig options for doing so, use the MTD function 'max_bad_blocks' to
compute the UBI bad_peb_limit.

Signed-off-by: Jeff Westfahl <jeff.westfahl@...com>
Signed-off-by: Zach Brown <zach.brown@...com>
Acked-by: Boris Brezillon <boris.brezillon@...e-electron.com>
---
 drivers/mtd/ubi/build.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 85d54f3..3029219 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -584,8 +584,17 @@ static int get_bad_peb_limit(const struct ubi_device *ubi, int max_beb_per1024)
 	int limit, device_pebs;
 	uint64_t device_size;
 
-	if (!max_beb_per1024)
-		return 0;
+	if (!max_beb_per1024) {
+		/*
+		 * Since max_beb_per1024 has not been set by the user in either
+		 * the cmdline or Kconfig, use mtd_max_bad_blocks to set the
+		 * limit if it is supported by the device.
+		 */
+		limit = mtd_max_bad_blocks(ubi->mtd, 0, ubi->mtd->size);
+		if (limit < 0)
+			return 0;
+		return limit;
+	}
 
 	/*
 	 * Here we are using size of the entire flash chip and
-- 
2.7.4