| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <583FDDEA.1030201@ti.com>
Date: Thu, 1 Dec 2016 13:53:06 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: John Stultz <john.stultz@...aro.org>,
lkml <linux-kernel@...r.kernel.org>
CC: Wei Xu <xuwei5@...ilicon.com>, Guodong Xu <guodong.xu@...aro.org>,
Amit Pundir <amit.pundir@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
John Youn <johnyoun@...opsys.com>,
Douglas Anderson <dianders@...omium.org>,
Chen Yu <chenyu56@...wei.com>,
Felipe Balbi <felipe.balbi@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
<linux-usb@...r.kernel.org>
Subject: Re: [RFC][PATCH 1/3] phy: phy-hi6220-usb: Wire up extconn support to
hikey's phy driver
Hi,
On Wednesday 23 November 2016 09:16 AM, John Stultz wrote:
> This wires extconn support to hikey's phy driver, and
> connects it to the usb UDC layer via a usb_phy structure.
>
> Not sure if this is the right way to connect phy -> UDC,
> but I'm lacking a clear example.
>
> Cc: Wei Xu <xuwei5@...ilicon.com>
> Cc: Guodong Xu <guodong.xu@...aro.org>
> Cc: Amit Pundir <amit.pundir@...aro.org>
> Cc: Rob Herring <robh+dt@...nel.org>
> Cc: John Youn <johnyoun@...opsys.com>
> Cc: Douglas Anderson <dianders@...omium.org>
> Cc: Chen Yu <chenyu56@...wei.com>
> Cc: Kishon Vijay Abraham I <kishon@...com>
> Cc: Felipe Balbi <felipe.balbi@...ux.intel.com>
> Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
> Cc: linux-usb@...r.kernel.org
> Signed-off-by: John Stultz <john.stultz@...aro.org>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 11 +++
> drivers/phy/Kconfig | 2 +
> drivers/phy/phy-hi6220-usb.c | 139 ++++++++++++++++++++++++++++++
> 3 files changed, 152 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 17839db..171fbb2 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -732,10 +732,21 @@
> regulator-always-on;
> };
>
> + usb_vbus: usb-vbus {
> + compatible = "linux,extcon-usb-gpio";
> + id-gpio = <&gpio2 6 1>;
> + };
> +
> + usb_id: usb-id {
> + compatible = "linux,extcon-usb-gpio";
> + id-gpio = <&gpio2 5 1>;
> + };
> +
> usb_phy: usbphy {
> compatible = "hisilicon,hi6220-usb-phy";
> #phy-cells = <0>;
> phy-supply = <&fixed_5v_hub>;
> + extcon = <&usb_vbus>, <&usb_id>;
> hisilicon,peripheral-syscon = <&sys_ctrl>;
> };
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index fe00f91..76f4f17 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -254,8 +254,10 @@ config PHY_MT65XX_USB3
> config PHY_HI6220_USB
> tristate "hi6220 USB PHY support"
> depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> + depends on EXTCON
> select GENERIC_PHY
> select MFD_SYSCON
> + select USB_PHY
> help
> Enable this to support the HISILICON HI6220 USB PHY.
>
> diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/phy-hi6220-usb.c
> index b2141cb..89d8475 100644
> --- a/drivers/phy/phy-hi6220-usb.c
> +++ b/drivers/phy/phy-hi6220-usb.c
> @@ -12,7 +12,12 @@
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/phy/phy.h>
> +#include <linux/usb/phy_companion.h>
> +#include <linux/usb/otg.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/phy.h>
> #include <linux/regmap.h>
> +#include <linux/extcon.h>
>
> #define SC_PERIPH_CTRL4 0x00c
>
> @@ -44,9 +49,21 @@
>
> #define EYE_PATTERN_PARA 0x7053348c
>
> +
> +struct hi6220_usb_cable {
> + struct notifier_block nb;
> + struct extcon_dev *extcon;
> + int state;
> +};
> +
> struct hi6220_priv {
> struct regmap *reg;
> struct device *dev;
> + struct usb_phy phy;
> +
> + struct delayed_work work;
> + struct hi6220_usb_cable vbus;
> + struct hi6220_usb_cable id;
> };
>
> static void hi6220_phy_init(struct hi6220_priv *priv)
> @@ -112,23 +129,85 @@ static int hi6220_phy_exit(struct phy *phy)
> return hi6220_phy_setup(priv, false);
> }
>
> +
> static struct phy_ops hi6220_phy_ops = {
> .init = hi6220_phy_start,
> .exit = hi6220_phy_exit,
> .owner = THIS_MODULE,
> };
>
> +static void hi6220_detect_work(struct work_struct *work)
> +{
> + struct hi6220_priv *priv =
> + container_of(to_delayed_work(work), struct hi6220_priv, work);
> + struct usb_otg *otg = priv->phy.otg;
> +
> + if (!IS_ERR(priv->vbus.extcon))
> + priv->vbus.state = extcon_get_cable_state_(priv->vbus.extcon,
> + EXTCON_USB);
> + if (!IS_ERR(priv->id.extcon))
> + priv->id.state = extcon_get_cable_state_(priv->id.extcon,
> + EXTCON_USB_HOST);
> + if (otg->gadget) {
> + if (priv->id.state)
> + usb_gadget_vbus_connect(otg->gadget);
> + else
> + usb_gadget_vbus_disconnect(otg->gadget);
> + }
> +}
> +
> +static int hi6220_otg_vbus_notifier(struct notifier_block *nb,
> + unsigned long event, void *ptr)
> +{
> + struct hi6220_usb_cable *vbus = container_of(nb,
> + struct hi6220_usb_cable, nb);
> + struct hi6220_priv *priv = container_of(vbus,
> + struct hi6220_priv, vbus);
> +
> + schedule_delayed_work(&priv->work, msecs_to_jiffies(100));
> + return NOTIFY_DONE;
> +}
> +
> +static int hi6220_otg_id_notifier(struct notifier_block *nb,
> + unsigned long event, void *ptr)
> +{
> + struct hi6220_usb_cable *id = container_of(nb,
> + struct hi6220_usb_cable, nb);
> + struct hi6220_priv *priv = container_of(id, struct hi6220_priv, id);
> +
> + schedule_delayed_work(&priv->work, msecs_to_jiffies(100));
> + return NOTIFY_DONE;
> +}
> +
> +static int hi6220_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
> +{
> + otg->host = host;
> + return 0;
> +}
> +
> +static int hi6220_otg_set_peripheral(struct usb_otg *otg,
> + struct usb_gadget *gadget)
> +{
> + otg->gadget = gadget;
> + return 0;
> +}
> +
> static int hi6220_phy_probe(struct platform_device *pdev)
> {
> struct phy_provider *phy_provider;
> struct device *dev = &pdev->dev;
> struct phy *phy;
> + struct usb_otg *otg;
> struct hi6220_priv *priv;
> + struct extcon_dev *ext_id, *ext_vbus;
> + int ret;
>
> priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
>
> + INIT_DELAYED_WORK(&priv->work, hi6220_detect_work);
> +
> priv->dev = dev;
> priv->reg = syscon_regmap_lookup_by_phandle(dev->of_node,
> "hisilicon,peripheral-syscon");
> @@ -137,13 +216,73 @@ static int hi6220_phy_probe(struct platform_device *pdev)
> return PTR_ERR(priv->reg);
> }
>
> +
> + ext_id = ERR_PTR(-ENODEV);
> + ext_vbus = ERR_PTR(-ENODEV);
> + if (of_property_read_bool(dev->of_node, "extcon")) {
> + /* Each one of them is not mandatory */
> + ext_vbus = extcon_get_edev_by_phandle(&pdev->dev, 0);
> + if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
> + return PTR_ERR(ext_vbus);
> +
> + ext_id = extcon_get_edev_by_phandle(&pdev->dev, 1);
> + if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
> + return PTR_ERR(ext_id);
> + }
> +
> + priv->vbus.extcon = ext_vbus;
> + if (!IS_ERR(ext_vbus)) {
> + priv->vbus.nb.notifier_call = hi6220_otg_vbus_notifier;
> + ret = extcon_register_notifier(ext_vbus, EXTCON_USB,
> + &priv->vbus.nb);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "register VBUS notifier failed\n");
> + return ret;
> + }
> +
> + priv->vbus.state = extcon_get_cable_state_(ext_vbus,
> + EXTCON_USB);
> + }
> +
> + priv->id.extcon = ext_id;
> + if (!IS_ERR(ext_id)) {
> + priv->id.nb.notifier_call = hi6220_otg_id_notifier;
> + ret = extcon_register_notifier(ext_id, EXTCON_USB_HOST,
> + &priv->id.nb);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "register ID notifier failed\n");
> + return ret;
> + }
> +
> + priv->id.state = extcon_get_cable_state_(ext_id,
> + EXTCON_USB_HOST);
> + }
> +
> hi6220_phy_init(priv);
>
> phy = devm_phy_create(dev, NULL, &hi6220_phy_ops);
> if (IS_ERR(phy))
> return PTR_ERR(phy);
>
> + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
> + if (!otg)
> + return -ENOMEM;
> +
> + priv->dev = &pdev->dev;
> + priv->phy.dev = priv->dev;
> + priv->phy.label = "hi6220_usb_phy";
> + priv->phy.otg = otg;
> + priv->phy.type = USB_PHY_TYPE_USB2;
> + otg->set_host = hi6220_otg_set_host;
> + otg->set_peripheral = hi6220_otg_set_peripheral;
> + otg->usb_phy = &priv->phy;
> +
> + platform_set_drvdata(pdev, priv);
> +
> phy_set_drvdata(phy, priv);
> +
> + usb_add_phy_dev(&priv->phy);
This would be like using two independent phy infrastructure :-( Should we just
handle the extcon events in USB driver?
Thanks
Kishon
Powered by blists - more mailing lists