[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJZ5v0gtG6++GqyOb_B=o-=R4YuFia8PH6W3NFiCZuay=pV7TA@mail.gmail.com>
Date: Fri, 2 Dec 2016 01:28:50 +0100
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Bjorn Helgaas <helgaas@...nel.org>
Cc: "Rafael J. Wysocki" <rjw@...ysocki.net>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Linux PCI <linux-pci@...r.kernel.org>,
Ard Biesheuvel <ard.biesheuvel@...aro.org>,
Gabriele Paoloni <gabriele.paoloni@...wei.com>,
"Rafael J. Wysocki" <rafael@...nel.org>, Duc Dang <dhdang@....com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"linaro-acpi@...ts.linaro.org" <linaro-acpi@...ts.linaro.org>,
ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Lv Zheng <lv.zheng@...el.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v2] PCI: Add information about describing PCI in ACPI
On Fri, Dec 2, 2016 at 12:27 AM, Bjorn Helgaas <helgaas@...nel.org> wrote:
> On Thu, Dec 01, 2016 at 11:37:39PM +0100, Rafael J. Wysocki wrote:
>> On Thursday, December 01, 2016 04:36:04 PM Bjorn Helgaas wrote:
>> > On Tue, Nov 29, 2016 at 03:39:48PM -0600, Bjorn Helgaas wrote:
>> > > Here's another stab at this writeup. I'd appreciate any comments!
>> > >
>> > > Changes from v1 to v2:
>> > > - Consumer/Producer is defined for Extended Address Space descriptors;
>> > > should be ignored for QWord/DWord/Word Address Space descriptors
>> > > - New arches may use Extended Address Space descriptors in PNP0A03 for
>> > > bridge registers, including ECAM (if the arch adds support for this)
>> > > - Add more details about MCFG and _CBA (Lv's suggestion)
>> > > - Incorporate Rafael's suggestions
>> > >
>> > > ---
>> > >
>> > > Bjorn Helgaas (1):
>> > > PCI: Add information about describing PCI in ACPI
>> > >
>> > >
>> > > Documentation/PCI/00-INDEX | 2
>> > > Documentation/PCI/acpi-info.txt | 180 +++++++++++++++++++++++++++++++++++++++
>> > > 2 files changed, 182 insertions(+)
>> > > create mode 100644 Documentation/PCI/acpi-info.txt
>> >
>> > It's very late in the cycle, but I'm considering trying to squeeze
>> > this into v4.9 on the grounds that:
>> >
>> > - It's only a documentation change and can't break anything, and
>> >
>> > - Distributing it more widely may help the arm64 firmware ecosystem
>> >
>> > But I don't want to disseminate misleading or incorrect information,
>> > so if it needs clarification or wordsmithing, or even just maturation,
>> > I'll wait until v4.10.
>> >
>> > The Consumer/Producer stuff, in particular, doesn't seem 100% settled
>> > yet. Your thoughts, and especially your improvements, are welcome!
>>
>> Well, what's the drawback if it doesn't go into 4.9?
>
> Only that it's not as easily accessible. ARM64 ACPI firmware is brand
> new. Neither the firmware nor the kernel developers, nor even the
> hardware designers, have the benefit of all the x86/ia64 history, so I
> wrote this to try to come to a common understanding of what Linux
> expects.
>
> The first generation of ARM64 hardware is already in the field, and it
> has teething problems in hardware, firmware, and kernel. For example,
> the current MCFG quirk situation: the ECAM hardware doesn't work quite
> per spec, the ACPI firmware doesn't describe the address space
> completely, and we don't really have consensus on how the firmware
> should communicate register space to the kernel.
>
> We're hoping the second generation can fix some of these problems, and
> I think this is the time to try to influence that.
Well, I would be super-careful if I were you, then. :-)
I'm not sure if squeezing it into 4.9.0 buys you anything here. If
you get it into 4.10-rc, you can request -stable to pick it up (at
least in principle) and then it will show up in 4.9.y at one point
which should suffice I suppose?
Thanks,
Rafael
Powered by blists - more mailing lists