linux-kernel - [PATCH 3/3] ARM: dts: stm32: enable ADC on stm32f429i-eval board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1480687022-12851-4-git-send-email-fabrice.gasnier@st.com>
Date:   Fri, 2 Dec 2016 14:57:02 +0100
From:   Fabrice Gasnier <fabrice.gasnier@...com>
To:     <alexandre.torgue@...com>, <mcoquelin.stm32@...il.com>,
        <linux@...linux.org.uk>, <mark.rutland@....com>,
        <robh+dt@...nel.org>
CC:     <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH 3/3] ARM: dts: stm32: enable ADC on stm32f429i-eval board

Enable analog to digital converter on stm32f429i-eval board.
It has on-board potentimeter wired to ADC3 in8 analog pin and
uses fixed regulator to provide reference voltage.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
---
 arch/arm/boot/dts/stm32429i-eval.dts | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 13c7cd2..6be0a24 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -65,6 +65,20 @@
 		serial0 = &usart1;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_vref: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vref";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		green {
@@ -123,3 +137,14 @@
 	pinctrl-names = "default";
 	status = "okay";
 };
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc3_in8_pin>;
+	vref-supply = <&reg_vref>;
+	status = "okay";
+	adc3: adc@200 {
+		st,adc-channels = <8>;
+		status = "okay";
+	};
+};
-- 
1.9.1