[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CADaLNDmWRn+UKzF8PH2LmYCSF+NhHaw26RTN+QoaByh1wS7jfQ@mail.gmail.com>
Date: Fri, 2 Dec 2016 11:39:20 -0800
From: Duc Dang <dhdang@....com>
To: Jon Masters <jcm@...hat.com>
Cc: Bjorn Helgaas <helgaas@...nel.org>,
Rafael Wysocki <rafael@...nel.org>,
Lorenzo Pieralisi <Lorenzo.Pieralisi@....com>,
Arnd Bergmann <arnd@...db.de>,
Mark Salter <msalter@...hat.com>, linux-pci@...r.kernel.org,
linux-arm <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Tomasz Nowicki <tn@...ihalf.com>, patches <patches@....com>
Subject: Re: [PATCH v4 1/1] PCI/ACPI: xgene: Add ECAM quirk for X-Gene PCIe controller
On Fri, Dec 2, 2016 at 12:11 AM, Jon Masters <jcm@...hat.com> wrote:
> You're welcome.
>
> (Unrelated) Note that I added a console= and earlycon in my test (and got the baud rate wrong for the console but nevermind...was ssh'd in after the earlycon output I cared about anyway) because of some other cleanup work for the SPCR parsing that apparently is still not quite fixed for upstream, or rather, there is a need to match on the 32-bit access required for the UART and that isn't happening so it's not getting setup. Folks are tracking that one and fixing it though.
I don't see this console issue on X-Gene1 (Mustang board). I tried
with X-Gene 2 as well. I used both console=ttyS0,115200 and
earlycon=uart8250,mmio32,0x1c020000. Are you setting baudrate to
115200 or something else?
>
> --
> Computer Architect | Sent from my 64-bit #ARM Powered phone
>
>> On Dec 2, 2016, at 02:37, Duc Dang <dhdang@....com> wrote:
>>
>>> On Thu, Dec 1, 2016 at 11:12 PM, Jon Masters <jcm@...hat.com> wrote:
>>>> On 12/01/2016 09:27 PM, Duc Dang wrote:
>>>> PCIe controllers in X-Gene SoCs is not ECAM compliant: software
>>>> needs to configure additional controller's register to address
>>>> device at bus:dev:function.
>>>>
>>>> The quirk will discover controller MMIO register space and configure
>>>> controller registers to select and address the target secondary device.
>>>>
>>>> The quirk will only be applied for X-Gene PCIe MCFG table with
>>>> OEM revison 1, 2, 3 or 4 (PCIe controller v1 and v2 on X-Gene SoCs).
>>>>
>>>> Signed-off-by: Duc Dang <dhdang@....com>
>>>
>>> So far I've tested this on an HPE ProLiant m400 (Moonshot) cartridge
>>> and will test it on some other reference platforms soon. Bootlog for
>>> the m400 attached in case Bjorn wants to see the output. Here's
>>> what I see in /proc/iomem btw on that platform:
>>>
>>> # cat /proc/iomem
>>> 10520000-10523fff : APMC0D18:00
>>> 10520000-10523fff : APMC0D18:00
>>> 10524000-10527fff : APMC0D17:00
>>> 10540000-1054a0ff : APMC0D01:00
>>> 10546000-10546fff : APMC0D50:00
>>> 1054a000-1054a00f : APMC0D12:03
>>> 1054a000-1054a00f : APMC0D12:02
>>> 1054a000-1054a00f : APMC0D12:01
>>> 1054a000-1054a00f : APMC0D12:00
>>> 17000000-17000fff : APMC0D01:00
>>> 17001000-17001fff : APMC0D01:00
>>> 17001000-170013ff : APMC0D15:00
>>> 17001000-170013ff : APMC0D15:00
>>> 1701c000-1701cfff : APMC0D14:00
>>> 1a800000-1a800fff : APMC0D0D:00
>>> 1a800000-1a800fff : APMC0D0D:00
>>> 1c000200-1c0002ff : APMC0D06:00
>>> 1c021000-1c0210ff : APMC0D08:00
>>> 1c021000-1c02101f : serial
>>> 1c024000-1c024fff : APMC0D07:00
>>> 1f230000-1f230fff : APMC0D0D:00
>>> 1f230000-1f230fff : APMC0D0D:00
>>> 1f23d000-1f23dfff : APMC0D0D:00
>>> 1f23d000-1f23dfff : APMC0D0D:00
>>> 1f23e000-1f23efff : APMC0D0D:00
>>> 1f23e000-1f23efff : APMC0D0D:00
>>> 1f2a0000-1f31ffff : APMC0D06:00
>>> 1f500000-1f50ffff : PCI Bus 0000:00
>>> 1f500000-1f50ffff : PNP0A08:00
>>> 78800000-78800fff : APMC0D13:00
>>> 78800000-78800fff : APMC0D12:03
>>> 78800000-78800fff : APMC0D12:02
>>> 78800000-78800fff : APMC0D12:01
>>> 78800000-78800fff : APMC0D12:00
>>> 78800000-78800fff : APMC0D11:00
>>> 78800000-78800fff : APMC0D10:03
>>> 78800000-78800fff : APMC0D10:02
>>> 78800000-78800fff : APMC0D10:01
>>> 78800000-78800fff : APMC0D10:00
>>> 79000000-798fffff : APMC0D0E:00
>>> 7c000000-7c1fffff : APMC0D12:00
>>> 7c200000-7c3fffff : APMC0D12:01
>>> 7c400000-7c5fffff : APMC0D12:02
>>> 7c600000-7c7fffff : APMC0D12:03
>>> 7e000000-7e000fff : APMC0D13:00
>>> 7e200000-7e200fff : APMC0D10:03
>>> 7e200000-7e200fff : APMC0D10:02
>>> 7e200000-7e200fff : APMC0D10:01
>>> 7e200000-7e200fff : APMC0D10:00
>>> 7e600000-7e600fff : APMC0D11:00
>>> 7e700000-7e700fff : APMC0D10:03
>>> 7e700000-7e700fff : APMC0D10:02
>>> 7e700000-7e700fff : APMC0D10:01
>>> 7e700000-7e700fff : APMC0D10:00
>>> 7e720000-7e720fff : APMC0D10:03
>>> 7e720000-7e720fff : APMC0D10:02
>>> 7e720000-7e720fff : APMC0D10:01
>>> 7e720000-7e720fff : APMC0D10:00
>>> 7e800000-7e800fff : APMC0D10:00
>>> 7e840000-7e840fff : APMC0D10:01
>>> 7e880000-7e880fff : APMC0D10:02
>>> 7e8c0000-7e8c0fff : APMC0D10:03
>>> 7e930000-7e930fff : APMC0D13:00
>>> 4000000000-4001ffffff : System RAM
>>> 4000080000-4000c3ffff : Kernel code
>>> 4000db0000-400165ffff : Kernel data
>>> 40023a0000-4ff733ffff : System RAM
>>> 4ff7340000-4ff77cffff : reserved
>>> 4ff77d0000-4ff79cffff : System RAM
>>> 4ff79d0000-4ff7e7ffff : reserved
>>> 4ff7e80000-4ff7e8ffff : System RAM
>>> 4ff7e90000-4ff7efffff : reserved
>>> 4ff7f10000-4ff800ffff : reserved
>>> 4ff8010000-4fffffffff : System RAM
>>> a020000000-a03fffffff : PCI Bus 0000:00
>>> a020000000-a0201fffff : PCI Bus 0000:01
>>> a020000000-a0200fffff : 0000:01:00.0
>>> a020000000-a0200fffff : mlx4_core
>>> a020100000-a0201fffff : 0000:01:00.0
>>> a060000000-a07fffffff : PCI Bus 0000:00
>>> a0d0000000-a0dfffffff : PCI ECAM
>>> a110000000-a14fffffff : PCI Bus 0000:00
>>> a110000000-a121ffffff : PCI Bus 0000:01
>>> a110000000-a111ffffff : 0000:01:00.0
>>> a110000000-a111ffffff : mlx4_core
>>> a112000000-a121ffffff : 0000:01:00.0
>>>
>>> Adding a Tested-by for the record:
>>>
>>> Tested-by: Jon Masters <jcm@...hat.com>
>>
>> Thanks a lot for testing this, Jon.
>>>
>>> Jon.
>>>
>>> --
>>> Computer Architect | Sent from my Fedora powered laptop
>>>
>> Regards,
>> Duc Dang.
Powered by blists - more mailing lists