| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <325096ce-a8c4-5119-8f94-1ed65267cee0@kernel.org>
Date: Sat, 3 Dec 2016 09:45:57 +0000
From: Jonathan Cameron <jic23@...nel.org>
To: Benjamin Gaignard <benjamin.gaignard@...aro.org>,
lee.jones@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
alexandre.torgue@...com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, thierry.reding@...il.com,
linux-pwm@...r.kernel.org, knaack.h@....de, lars@...afoo.de,
pmeerw@...erw.net, linux-iio@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: fabrice.gasnier@...com, gerald.baeza@...com,
arnaud.pouliquen@...com, linus.walleij@...aro.org,
linaro-kernel@...ts.linaro.org,
Benjamin Gaignard <benjamin.gaignard@...com>
Subject: Re: [PATCH v3 7/7] ARM: dts: stm32: add stm32 general purpose timer
driver in DT
On 02/12/16 10:17, Benjamin Gaignard wrote:
> Add general purpose timers and it sub-nodes into DT for stm32f4.
> Define and enable pwm1 and pwm3 for stm32f469 discovery board
>
> version 3:
> - use "st,stm32-timer-trigger" in DT
>
> version 2:
> - use parameters to describe hardware capabilities
> - do not use references for pwm and iio timer subnodes
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@...com>
This didn't come out nearly as badly as I thought it would.
Seems we don't need the multiple compatibles which is good!
> ---
> arch/arm/boot/dts/stm32f429.dtsi | 333 +++++++++++++++++++++++++++++++++-
> arch/arm/boot/dts/stm32f469-disco.dts | 28 +++
> 2 files changed, 360 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index bca491d..8c50d03 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -48,7 +48,7 @@
> #include "skeleton.dtsi"
> #include "armv7-m.dtsi"
> #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
> -
> +#include <dt-bindings/iio/timer/st,stm32-timer-triggers.h>
> / {
> clocks {
> clk_hse: clk-hse {
> @@ -355,6 +355,21 @@
> slew-rate = <2>;
> };
> };
> +
> + pwm1_pins: pwm@1 {
> + pins {
> + pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
> + <STM32F429_PB13_FUNC_TIM1_CH1N>,
> + <STM32F429_PB12_FUNC_TIM1_BKIN>;
> + };
> + };
> +
> + pwm3_pins: pwm@3 {
> + pins {
> + pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
> + <STM32F429_PB5_FUNC_TIM3_CH2>;
> + };
> + };
> };
>
> rcc: rcc@...23810 {
> @@ -426,6 +441,322 @@
> interrupts = <80>;
> clocks = <&rcc 0 38>;
> };
> +
> + gptimer1: gptimer1@...10000 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40010000 0x400>;
> + clocks = <&rcc 0 160>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm1@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <4>;
> + st,breakinput;
> + st,complementary;
> + status = "disabled";
> + };
> +
> + timer1@0 {
> + compatible = "st,stm32-timer-trigger";
> + interrupts = <27>;
> + st,input-triggers-names = TIM5_TRGO,
> + TIM2_TRGO,
> + TIM4_TRGO,
> + TIM3_TRGO;
> + st,output-triggers-names = TIM1_TRGO,
> + TIM1_CH1,
> + TIM1_CH2,
> + TIM1_CH3,
> + TIM1_CH4;
> + status = "disabled";
> + };
> + };
> +
> + gptimer2: gptimer2@...00000 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40000000 0x400>;
> + clocks = <&rcc 0 128>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm2@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <4>;
> + st,32bits-counter;
> + status = "disabled";
> + };
> +
> + timer2@0 {
> + compatible = "st,stm32-timer-trigger";
> + interrupts = <28>;
> + st,input-triggers-names = TIM1_TRGO,
> + TIM8_TRGO,
> + TIM3_TRGO,
> + TIM4_TRGO;
> + st,output-triggers-names = TIM2_TRGO,
> + TIM2_CH1,
> + TIM2_CH2,
> + TIM2_CH3,
> + TIM2_CH4;
> + status = "disabled";
> + };
> + };
> +
> + gptimer3: gptimer3@...00400 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40000400 0x400>;
> + clocks = <&rcc 0 129>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm3@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <4>;
> + status = "disabled";
> + };
> +
> + timer3@0 {
> + compatible = "st,stm32-timer-trigger";
> + interrupts = <29>;
> + st,input-triggers-names = TIM1_TRGO,
> + TIM8_TRGO,
> + TIM5_TRGO,
> + TIM4_TRGO;
> + st,output-triggers-names = TIM3_TRGO,
> + TIM3_CH1,
> + TIM3_CH2,
> + TIM3_CH3,
> + TIM3_CH4;
> + status = "disabled";
> + };
> + };
> +
> + gptimer4: gptimer4@...00800 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40000800 0x400>;
> + clocks = <&rcc 0 130>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm4@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <4>;
> + status = "disabled";
> + };
> +
> + timer4@0 {
> + compatible = "st,stm32-timer-trigger";
> + interrupts = <30>;
> + st,input-triggers-names = TIM1_TRGO,
> + TIM2_TRGO,
> + TIM3_TRGO,
> + TIM8_TRGO;
> + st,output-triggers-names = TIM4_TRGO,
> + TIM4_CH1,
> + TIM4_CH2,
> + TIM4_CH3,
> + TIM4_CH4;
> + status = "disabled";
> + };
> + };
> +
> + gptimer5: gptimer5@...00C00 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40000C00 0x400>;
> + clocks = <&rcc 0 131>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm5@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <4>;
> + st,32bits-counter;
> + status = "disabled";
> + };
> +
> + timer5@0 {
> + compatible = "st,stm32-timer-trigger";
> + interrupts = <50>;
> + st,input-triggers-names = TIM2_TRGO,
> + TIM3_TRGO,
> + TIM4_TRGO,
> + TIM8_TRGO;
> + st,output-triggers-names = TIM5_TRGO,
> + TIM5_CH1,
> + TIM5_CH2,
> + TIM5_CH3,
> + TIM5_CH4;
> + status = "disabled";
> + };
> + };
> +
> + gptimer6: gptimer6@...01000 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40001000 0x400>;
> + clocks = <&rcc 0 132>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + timer6@0 {
> + compatible = "st,stm32-timer-trigger";
> + interrupts = <54>;
> + st,output-triggers-names = TIM6_TRGO;
> + status = "disabled";
> + };
> + };
> +
> + gptimer7: gptimer7@...01400 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40001400 0x400>;
> + clocks = <&rcc 0 133>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + timer7@0 {
> + compatible = "st,stm32-timer-trigger";
> + interrupts = <55>;
> + st,output-triggers-names = TIM7_TRGO;
> + status = "disabled";
> + };
> + };
> +
> + gptimer8: gptimer8@...10400 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40010400 0x400>;
> + clocks = <&rcc 0 161>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm8@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <4>;
> + st,complementary;
> + st,breakinput;
> + status = "disabled";
> + };
> +
> + timer8@0 {
> + compatible = "st,stm32-timer-trigger";
> + interrupts = <46>;
> + st,input-triggers-names = TIM1_TRGO,
> + TIM2_TRGO,
> + TIM4_TRGO,
> + TIM5_TRGO;
> + st,output-triggers-names = TIM8_TRGO,
> + TIM8_CH1,
> + TIM8_CH2,
> + TIM8_CH3,
> + TIM8_CH4;
> + status = "disabled";
> + };
> + };
> +
> + gptimer9: gptimer9@...14000 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40014000 0x400>;
> + clocks = <&rcc 0 176>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm9@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <2>;
> + status = "disabled";
> + };
> +
> + timer9@0 {
> + compatible = "st,stm32-timer-trigger";
> + interrupts = <24>;
> + st,input-triggers-names = TIM2_TRGO,
> + TIM3_TRGO;
> + st,output-triggers-names = TIM9_TRGO,
> + TIM9_CH1,
> + TIM9_CH2;
> + status = "disabled";
> + };
> + };
> +
> + gptimer10: gptimer10@...14400 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40014400 0x400>;
> + clocks = <&rcc 0 177>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm10@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <1>;
> + status = "disabled";
> + };
> + };
> +
> + gptimer11: gptimer11@...14800 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40014800 0x400>;
> + clocks = <&rcc 0 178>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm11@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <1>;
> + status = "disabled";
> + };
> + };
> +
> + gptimer12: gptimer12@...01800 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40001800 0x400>;
> + clocks = <&rcc 0 134>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm12@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <2>;
> + status = "disabled";
> + };
> +
> + timer12@0 {
> + compatible = "st,stm32-timer-trigger";
> + interrupts = <43>;
> + st,input-triggers-names = TIM4_TRGO,
> + TIM5_TRGO;
> + st,output-triggers-names = TIM12_TRGO,
> + TIM12_CH1,
> + TIM12_CH2;
> + status = "disabled";
> + };
> + };
> +
> + gptimer13: gptimer13@...01C00 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40001C00 0x400>;
> + clocks = <&rcc 0 135>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm13@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <1>;
> + status = "disabled";
> + };
> + };
> +
> + gptimer14: gptimer14@...02000 {
> + compatible = "st,stm32-gptimer";
> + reg = <0x40002000 0x400>;
> + clocks = <&rcc 0 136>;
> + clock-names = "clk_int";
> + status = "disabled";
> +
> + pwm14@0 {
> + compatible = "st,stm32-pwm";
> + st,pwm-num-chan = <1>;
> + status = "disabled";
> + };
> + };
> };
> };
>
> diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
> index 8a163d7..df4ca7e 100644
> --- a/arch/arm/boot/dts/stm32f469-disco.dts
> +++ b/arch/arm/boot/dts/stm32f469-disco.dts
> @@ -81,3 +81,31 @@
> &usart3 {
> status = "okay";
> };
> +
> +&gptimer1 {
> + status = "okay";
> +
> + pwm1@0 {
> + pinctrl-0 = <&pwm1_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> + };
> +
> + timer1@0 {
> + status = "okay";
> + };
> +};
> +
> +&gptimer3 {
> + status = "okay";
> +
> + pwm3@0 {
> + pinctrl-0 = <&pwm3_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> + };
> +
> + timer3@0 {
> + status = "okay";
> + };
> +};
>
Powered by blists - more mailing lists