| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20161203182941.GC38119@dtor-ws>
Date: Sat, 3 Dec 2016 10:29:41 -0800
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: Andrew Duggan <aduggan@...aptics.com>
Cc: Benjamin Tissoires <benjamin.tissoires@...hat.com>,
Jiri Kosina <jikos@...nel.org>,
Lyude Paul <thatslyude@...il.com>,
Nick Dyer <nick@...anahar.org>,
Dennis Wassenberg <dennis.wassenberg@...unet.com>,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 4/7] Input: synaptics-rmi4 - store the attn data in
the driver
On Fri, Dec 02, 2016 at 04:34:01PM -0800, Andrew Duggan wrote:
> On 12/02/2016 03:41 AM, Benjamin Tissoires wrote:
> >Now that we have a proper API to set the attention data, there is
> >no point in keeping it in the transport driver.
> >
> >Signed-off-by: Benjamin Tissoires <benjamin.tissoires@...hat.com>
>
> Reviewed-by: Andrew Duggan <aduggan@...aptics.com>
Applied, thank you.
>
> >---
> >
> >no changes in v2
> >---
> > drivers/input/rmi4/rmi_driver.c | 5 ++---
> > drivers/input/rmi4/rmi_f03.c | 13 +++++++------
> > drivers/input/rmi4/rmi_f11.c | 12 ++++++------
> > drivers/input/rmi4/rmi_f12.c | 43 +++++++++++++++++++++--------------------
> > drivers/input/rmi4/rmi_f30.c | 11 ++++++-----
> > include/linux/rmi.h | 5 ++---
> > 6 files changed, 45 insertions(+), 44 deletions(-)
> >
> >diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
> >index 85062e4..05a3c4b 100644
> >--- a/drivers/input/rmi4/rmi_driver.c
> >+++ b/drivers/input/rmi4/rmi_driver.c
> >@@ -155,7 +155,7 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
> > if (!data)
> > return 0;
> >- if (!rmi_dev->xport->attn_data) {
> >+ if (!data->attn_data.data) {
> > error = rmi_read_block(rmi_dev,
> > data->f01_container->fd.data_base_addr + 1,
> > data->irq_status, data->num_of_irq_regs);
> >@@ -223,8 +223,7 @@ static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
> > count = kfifo_get(&drvdata->attn_fifo, &attn_data);
> > if (count) {
> > *(drvdata->irq_status) = attn_data.irq_status;
> >- rmi_dev->xport->attn_data = attn_data.data;
> >- rmi_dev->xport->attn_size = attn_data.size;
> >+ drvdata->attn_data = attn_data;
> > }
> > ret = rmi_process_interrupt_requests(rmi_dev);
> >diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c
> >index 06279cd..996dcbb 100644
> >--- a/drivers/input/rmi4/rmi_f03.c
> >+++ b/drivers/input/rmi4/rmi_f03.c
> >@@ -166,6 +166,7 @@ static int rmi_f03_config(struct rmi_function *fn)
> > static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
> > {
> > struct rmi_device *rmi_dev = fn->rmi_dev;
> >+ struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
> > struct f03_data *f03 = dev_get_drvdata(&fn->dev);
> > u16 data_addr = fn->fd.data_base_addr;
> > const u8 ob_len = f03->rx_queue_length * RMI_F03_OB_SIZE;
> >@@ -176,20 +177,20 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
> > int i;
> > int ret;
> >- if (!rmi_dev || !rmi_dev->xport)
> >+ if (!rmi_dev)
> > return -ENODEV;
> >- if (rmi_dev->xport->attn_data) {
> >+ if (drvdata->attn_data.data) {
> > /* First grab the data passed by the transport device */
> >- if (rmi_dev->xport->attn_size < ob_len) {
> >+ if (drvdata->attn_data.size < ob_len) {
> > dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n");
> > return 0;
> > }
> >- memcpy(obs, rmi_dev->xport->attn_data, ob_len);
> >+ memcpy(obs, drvdata->attn_data.data, ob_len);
> >- rmi_dev->xport->attn_data += ob_len;
> >- rmi_dev->xport->attn_size -= ob_len;
> >+ drvdata->attn_data.data += ob_len;
> >+ drvdata->attn_data.size -= ob_len;
> > } else {
> > /* Grab all of the data registers, and check them for data */
> > ret = rmi_read_block(fn->rmi_dev, data_addr + RMI_F03_OB_OFFSET,
> >diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
> >index 44fc275..bc5e37f 100644
> >--- a/drivers/input/rmi4/rmi_f11.c
> >+++ b/drivers/input/rmi4/rmi_f11.c
> >@@ -1284,19 +1284,19 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
> > int error;
> > int valid_bytes = f11->sensor.pkt_size;
> >- if (rmi_dev->xport->attn_data) {
> >+ if (drvdata->attn_data.data) {
> > /*
> > * The valid data in the attention report is less then
> > * expected. Only process the complete fingers.
> > */
> >- if (f11->sensor.attn_size > rmi_dev->xport->attn_size)
> >- valid_bytes = rmi_dev->xport->attn_size;
> >+ if (f11->sensor.attn_size > drvdata->attn_data.size)
> >+ valid_bytes = drvdata->attn_data.size;
> > else
> > valid_bytes = f11->sensor.attn_size;
> >- memcpy(f11->sensor.data_pkt, rmi_dev->xport->attn_data,
> >+ memcpy(f11->sensor.data_pkt, drvdata->attn_data.data,
> > valid_bytes);
> >- rmi_dev->xport->attn_data += f11->sensor.attn_size;
> >- rmi_dev->xport->attn_size -= f11->sensor.attn_size;
> >+ drvdata->attn_data.data += f11->sensor.attn_size;
> >+ drvdata->attn_data.size -= f11->sensor.attn_size;
> > } else {
> > error = rmi_read_block(rmi_dev,
> > data_base_addr, f11->sensor.data_pkt,
> >diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c
> >index 82a4964..8c5360c 100644
> >--- a/drivers/input/rmi4/rmi_f12.c
> >+++ b/drivers/input/rmi4/rmi_f12.c
> >@@ -208,19 +208,20 @@ static int rmi_f12_attention(struct rmi_function *fn,
> > {
> > int retval;
> > struct rmi_device *rmi_dev = fn->rmi_dev;
> >+ struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
> > struct f12_data *f12 = dev_get_drvdata(&fn->dev);
> > struct rmi_2d_sensor *sensor = &f12->sensor;
> > int valid_bytes = sensor->pkt_size;
> >- if (rmi_dev->xport->attn_data) {
> >- if (sensor->attn_size > rmi_dev->xport->attn_size)
> >- valid_bytes = rmi_dev->xport->attn_size;
> >+ if (drvdata->attn_data.data) {
> >+ if (sensor->attn_size > drvdata->attn_data.size)
> >+ valid_bytes = drvdata->attn_data.size;
> > else
> > valid_bytes = sensor->attn_size;
> >- memcpy(sensor->data_pkt, rmi_dev->xport->attn_data,
> >+ memcpy(sensor->data_pkt, drvdata->attn_data.data,
> > valid_bytes);
> >- rmi_dev->xport->attn_data += sensor->attn_size;
> >- rmi_dev->xport->attn_size -= sensor->attn_size;
> >+ drvdata->attn_data.data += sensor->attn_size;
> >+ drvdata->attn_data.size -= sensor->attn_size;
> > } else {
> > retval = rmi_read_block(rmi_dev, f12->data_addr,
> > sensor->data_pkt, sensor->pkt_size);
> >@@ -323,7 +324,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
> > const struct rmi_register_desc_item *item;
> > struct rmi_2d_sensor *sensor;
> > struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
> >- struct rmi_transport_dev *xport = rmi_dev->xport;
> >+ struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
> > u16 data_offset = 0;
> > rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__);
> >@@ -422,7 +423,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
> > * HID attention reports.
> > */
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 0);
> >- if (item && !xport->attn_data)
> >+ if (item && !drvdata->attn_data.data)
> > data_offset += item->reg_size;
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 1);
> >@@ -436,15 +437,15 @@ static int rmi_f12_probe(struct rmi_function *fn)
> > }
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 2);
> >- if (item && !xport->attn_data)
> >+ if (item && !drvdata->attn_data.data)
> > data_offset += item->reg_size;
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 3);
> >- if (item && !xport->attn_data)
> >+ if (item && !drvdata->attn_data.data)
> > data_offset += item->reg_size;
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 4);
> >- if (item && !xport->attn_data)
> >+ if (item && !drvdata->attn_data.data)
> > data_offset += item->reg_size;
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 5);
> >@@ -456,22 +457,22 @@ static int rmi_f12_probe(struct rmi_function *fn)
> > }
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 6);
> >- if (item && !xport->attn_data) {
> >+ if (item && !drvdata->attn_data.data) {
> > f12->data6 = item;
> > f12->data6_offset = data_offset;
> > data_offset += item->reg_size;
> > }
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 7);
> >- if (item && !xport->attn_data)
> >+ if (item && !drvdata->attn_data.data)
> > data_offset += item->reg_size;
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 8);
> >- if (item && !xport->attn_data)
> >+ if (item && !drvdata->attn_data.data)
> > data_offset += item->reg_size;
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 9);
> >- if (item && !xport->attn_data) {
> >+ if (item && !drvdata->attn_data.data) {
> > f12->data9 = item;
> > f12->data9_offset = data_offset;
> > data_offset += item->reg_size;
> >@@ -480,27 +481,27 @@ static int rmi_f12_probe(struct rmi_function *fn)
> > }
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 10);
> >- if (item && !xport->attn_data)
> >+ if (item && !drvdata->attn_data.data)
> > data_offset += item->reg_size;
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 11);
> >- if (item && !xport->attn_data)
> >+ if (item && !drvdata->attn_data.data)
> > data_offset += item->reg_size;
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 12);
> >- if (item && !xport->attn_data)
> >+ if (item && !drvdata->attn_data.data)
> > data_offset += item->reg_size;
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 13);
> >- if (item && !xport->attn_data)
> >+ if (item && !drvdata->attn_data.data)
> > data_offset += item->reg_size;
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 14);
> >- if (item && !xport->attn_data)
> >+ if (item && !drvdata->attn_data.data)
> > data_offset += item->reg_size;
> > item = rmi_get_register_desc_item(&f12->data_reg_desc, 15);
> >- if (item && !xport->attn_data) {
> >+ if (item && !drvdata->attn_data.data) {
> > f12->data15 = item;
> > f12->data15_offset = data_offset;
> > data_offset += item->reg_size;
> >diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
> >index f696137..f4b491e 100644
> >--- a/drivers/input/rmi4/rmi_f30.c
> >+++ b/drivers/input/rmi4/rmi_f30.c
> >@@ -99,6 +99,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
> > {
> > struct f30_data *f30 = dev_get_drvdata(&fn->dev);
> > struct rmi_device *rmi_dev = fn->rmi_dev;
> >+ struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
> > int retval;
> > int gpiled = 0;
> > int value = 0;
> >@@ -109,15 +110,15 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
> > return 0;
> > /* Read the gpi led data. */
> >- if (rmi_dev->xport->attn_data) {
> >- if (rmi_dev->xport->attn_size < f30->register_count) {
> >+ if (drvdata->attn_data.data) {
> >+ if (drvdata->attn_data.size < f30->register_count) {
> > dev_warn(&fn->dev, "F30 interrupted, but data is missing\n");
> > return 0;
> > }
> >- memcpy(f30->data_regs, rmi_dev->xport->attn_data,
> >+ memcpy(f30->data_regs, drvdata->attn_data.data,
> > f30->register_count);
> >- rmi_dev->xport->attn_data += f30->register_count;
> >- rmi_dev->xport->attn_size -= f30->register_count;
> >+ drvdata->attn_data.data += f30->register_count;
> >+ drvdata->attn_data.size -= f30->register_count;
> > } else {
> > retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
> > f30->data_regs, f30->register_count);
> >diff --git a/include/linux/rmi.h b/include/linux/rmi.h
> >index 1d48656..ac910f7 100644
> >--- a/include/linux/rmi.h
> >+++ b/include/linux/rmi.h
> >@@ -272,9 +272,6 @@ struct rmi_transport_dev {
> > struct rmi_device_platform_data pdata;
> > struct input_dev *input;
> >-
> >- void *attn_data;
> >- int attn_size;
> > };
> > /**
> >@@ -364,6 +361,8 @@ struct rmi_driver_data {
> > bool enabled;
> > struct mutex enabled_mutex;
> >+
> >+ struct rmi4_attn_data attn_data;
> > DECLARE_KFIFO(attn_fifo, struct rmi4_attn_data, 16);
> > };
>
>
--
Dmitry
Powered by blists - more mailing lists