linux-kernel - [PATCH 2/2] usb: host: xhci: Handle the right timeout command

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <0c39bfed1cf6f7b747e702aa841f82c9d2140f27.1480922249.git.baolin.wang@linaro.org>
Date:   Mon,  5 Dec 2016 15:51:50 +0800
From:   Baolin Wang <baolin.wang@...aro.org>
To:     mathias.nyman@...el.com, gregkh@...uxfoundation.org
Cc:     baolu.lu@...ux.intel.com, linux-usb@...r.kernel.org,
        linux-kernel@...r.kernel.org, broonie@...nel.org,
        baolin.wang@...aro.org
Subject: [PATCH 2/2] usb: host: xhci: Handle the right timeout command

If a command event is found on the event ring during an interrupt,
we need to stop the command timer with del_timer(). Since del_timer()
can fail if the timer is running and waiting on the xHCI lock, then
it maybe get the wrong timeout command in xhci_handle_command_timeout()
if host fetched a new command and updated the xhci->current_cmd in
handle_cmd_completion(). For this situation, we need a way to signal
to the command timer that everything is fine and it should exit.

We should introduce a counter (xhci->current_cmd_pending) for the number
of pending commands. If we need to cancel the command timer and del_timer()
succeeds, we decrement the number of pending commands. If del_timer() fails,
we leave the number of pending commands alone.

For handling timeout command, in xhci_handle_command_timeout() we will check
the counter after decrementing it, if the counter (xhci->current_cmd_pending)
is 0, which means xhci->current_cmd is the right timeout command. If the
counter (xhci->current_cmd_pending) is greater than 0, which means current
timeout command has been handled by host and host has fetched new command as
xhci->current_cmd, then just return and wait for new current command.

Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
---
 drivers/usb/host/xhci-ring.c |   29 ++++++++++++++++++++++++++++-
 drivers/usb/host/xhci.h      |    1 +
 2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9965a4c..edc9ac2 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1253,6 +1253,7 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
 	if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
 	    !(xhci->xhc_state & XHCI_STATE_DYING)) {
 		xhci->current_cmd = cur_cmd;
+		xhci->current_cmd_pending++;
 		mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
 		xhci_ring_cmd_db(xhci);
 	}
@@ -1269,11 +1270,27 @@ void xhci_handle_command_timeout(unsigned long data)
 	xhci = (struct xhci_hcd *) data;
 
 	spin_lock_irqsave(&xhci->lock, flags);
+	xhci->current_cmd_pending--;
+
 	if (!xhci->current_cmd) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
 
+	/*
+	 * If the current_cmd_pending is 0, which means current command is
+	 * timeout.
+	 *
+	 * If the current_cmd_pending is greater than 0, which means current
+	 * timeout command has been handled by host and host has fetched new
+	 * command as xhci->current_cmd, then just return and wait for new
+	 * current command.
+	 */
+	if (xhci->current_cmd_pending > 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return;
+	}
+
 	if (xhci->current_cmd->status == COMP_CMD_ABORT)
 		second_timeout = true;
 	xhci->current_cmd->status = COMP_CMD_ABORT;
@@ -1282,6 +1299,8 @@ void xhci_handle_command_timeout(unsigned long data)
 	hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
 	if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
 	    (hw_ring_state & CMD_RING_RUNNING))  {
+		/* Will add command timer again to wait for abort event */
+		xhci->current_cmd_pending++;
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		xhci_dbg(xhci, "Command timeout\n");
 		ret = xhci_abort_cmd_ring(xhci);
@@ -1336,7 +1355,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 
 	cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list);
 
-	del_timer(&xhci->cmd_timer);
+	/*
+	 * If the command timer is running on another CPU, we don't decrement
+	 * current_cmd_pending, since we didn't successfully stop the command
+	 * timer.
+	 */
+	if (del_timer(&xhci->cmd_timer))
+		xhci->current_cmd_pending--;
 
 	trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event);
 
@@ -1427,6 +1452,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 	if (cmd->cmd_list.next != &xhci->cmd_list) {
 		xhci->current_cmd = list_entry(cmd->cmd_list.next,
 					       struct xhci_command, cmd_list);
+		xhci->current_cmd_pending++;
 		mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
 	} else if (xhci->current_cmd == cmd) {
 		xhci->current_cmd = NULL;
@@ -3927,6 +3953,7 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
 	if (xhci->cmd_list.next == &cmd->cmd_list &&
 	    !timer_pending(&xhci->cmd_timer)) {
 		xhci->current_cmd = cmd;
+		xhci->current_cmd_pending++;
 		mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
 	}
 
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 9dbaacf..5d81257 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1567,6 +1567,7 @@ struct xhci_hcd {
 	unsigned int		cmd_ring_reserved_trbs;
 	struct timer_list	cmd_timer;
 	struct xhci_command	*current_cmd;
+	u32			current_cmd_pending;
 	struct xhci_ring	*event_ring;
 	struct xhci_erst	erst;
 	/* Scratchpad */
-- 
1.7.9.5