linux-kernel - Re: [PATCH 2/7] net: ethernet: ti: cpdma: fix desc re-queuing

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <bf94d724-0723-4153-1e16-cb18e21314b2@ti.com>
Date:   Mon, 5 Dec 2016 12:22:19 -0600
From:   Grygorii Strashko <grygorii.strashko@...com>
To:     Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
CC:     "David S. Miller" <davem@...emloft.net>, <netdev@...r.kernel.org>,
        Mugunthan V N <mugunthanvnm@...com>,
        Sekhar Nori <nsekhar@...com>, <linux-kernel@...r.kernel.org>,
        <linux-omap@...r.kernel.org>
Subject: Re: [PATCH 2/7] net: ethernet: ti: cpdma: fix desc re-queuing



On 12/02/2016 05:28 PM, Ivan Khoronzhuk wrote:
> On Fri, Dec 02, 2016 at 10:45:07AM -0600, Grygorii Strashko wrote:
>>
>>
>> On 12/02/2016 05:03 AM, Ivan Khoronzhuk wrote:
>>> On Thu, Dec 01, 2016 at 05:34:27PM -0600, Grygorii Strashko wrote:
>>>> The currently processing cpdma descriptor with EOQ flag set may
>>>> contain two values in Next Descriptor Pointer field:
>>>> - valid pointer: means CPDMA missed addition of new desc in queue;
>>> It shouldn't happen in normal circumstances, right?
>>
>> it might happen, because desc push compete with desc pop.
>> You can check stats values:
>> chan->stats.misqueued
>> chan->stats.requeue
>>  under different types of net-loads.
> I've done this, of-course.
> By whole logic the misqueued counter has to cover all cases.
> But that's not true.
> 
>>
>> TRM:
>> "
>> If the pNext pointer is initially NULL, and more packets need to be queued for transmit, the software
>> application may alter this pointer to point to a newly appended descriptor. The EMAC will use the new
>> pointer value and proceed to the next descriptor unless the pNext value has already been read. In this
>> latter case, the transmitter will halt on the transmit channel in question, and the software application may
>> restart it at that time. The software can detect this case by checking for an end of queue (EOQ) condition
>> flag on the updated packet descriptor when it is returned by the EMAC.
>> "
> That's true. No issues in desc.
> In the code no any place to update next_desc except submit function.
> 
> And this case is supposed to be caught here:
> For submit:
> cpdma_chan_submit()
> spin_lock_irqsave(&chan->lock);
> ...
> --->__cpdma_chan_submit()
> ...
> ------> desc_write(prev, hw_next, desc_dma); // here next pointer is updated, it can be not in time
> ...
> ------> mode = desc_read(prev, hw_mode); // pay attention, it's read after updating next pointer
> ------> if ((mode & CPDMA_DESC_EOQ) &&
> ------> (chan->state == CPDMA_STATE_ACTIVE)) { // here checked if it was late update
> ---------> chan_write(chan, hdp, desc_dma); // here transmit is restarted, if needed

You've forgot about CPPI hw itself - it's not sync by sw, and so continue run in
background - as result, CPPI might read "next" already, but flags are not updated yet.

> 
> For process it only caught the fact of late update, but it has to be caught in
> submit() already:
> __cpdma_chan_process()
> spin_lock_irqsave(&chan->lock);
> ------> if (mode & CPDMA_DESC_EOQ) // here transmit is restarted, if needed
> ---------> chan_write(chan, hdp, desc_dma); // but w/o updating next pointer
> 
> Seems there is no place where hw_next is updated w/o updating hdp :-| in case
> of late hw_next set. And that is strange. I know it happens, I've checked it
> before of-course. Then I thought, maybe there is some problem with write order,
> thus out of sync, nothing more.
> 
>>
>>
>>> So, why it happens only for egress channels? And Does that mean
>>> there is some resynchronization between submit and process function,
>>> or this is h/w issue?
>>
>> no hw issues. this patch just removes one unnecessary I/O access 
> No objections against patch. Anyway it's better then before.
> Just want to know the real reason why it happens, maybe there is smth else.
> 
>>
>>>
>>>> - null: no more descriptors in queue.
>>>> In the later case, it's not required to write to HDP register, but now
>>>> CPDMA does it.
>>>>
>>>> Hence, add additional check for Next Descriptor Pointer != null in
>>>> cpdma_chan_process() function before writing in HDP register.
>>>>
>>>> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
>>>> ---
>>>>  drivers/net/ethernet/ti/davinci_cpdma.c | 2 +-
>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
>>>> index 0924014..379314f 100644
>>>> --- a/drivers/net/ethernet/ti/davinci_cpdma.c
>>>> +++ b/drivers/net/ethernet/ti/davinci_cpdma.c
>>>> @@ -1152,7 +1152,7 @@ static int __cpdma_chan_process(struct cpdma_chan *chan)
>>>>  	chan->count--;
>>>>  	chan->stats.good_dequeue++;
>>>>  
>>>> -	if (status & CPDMA_DESC_EOQ) {
>>>> +	if ((status & CPDMA_DESC_EOQ) && chan->head) {
>>>>  		chan->stats.requeue++;
>>>>  		chan_write(chan, hdp, desc_phys(pool, chan->head));
>>>>  	}
>>>> -- 
>>>> 2.10.1
>>>>
>>
>> -- 
>> regards,
>> -grygorii

-- 
regards,
-grygorii