linux-kernel - Re: [PATCH 1/2] Add DT bindings documentation for Synopsys UDC driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20161205230420.ubo2cskoohfnwlfs@rob-hp-laptop>
Date:   Mon, 5 Dec 2016 17:04:20 -0600
From:   Rob Herring <robh@...nel.org>
To:     Raviteja Garimella <raviteja.garimella@...adcom.com>
Cc:     Mark Rutland <mark.rutland@....com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Felipe Balbi <balbi@...nel.org>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com, linux-usb@...r.kernel.org
Subject: Re: [PATCH 1/2] Add DT bindings documentation for Synopsys UDC driver

On Wed, Nov 30, 2016 at 11:35:09AM +0530, Raviteja Garimella wrote:
> This patch adds documentation for Synopsis Designware Cores AHB
> Subsystem Device Controller (UDC).
> 
> Signed-off-by: Raviteja Garimella <raviteja.garimella@...adcom.com>
> ---
>  .../devicetree/bindings/usb/snps,dw-ahb-udc.txt    | 29 ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt b/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt
> new file mode 100644
> index 0000000..64e1fbf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt
> @@ -0,0 +1,29 @@
> +Synopsys USB Device controller.
> +
> +The device node is used for Synopsys Designware Cores AHB
> +Subsystem Device Controller (UDC).
> +
> +Required properties:
> + - compatible: should be "snps,dw-ahbudc"

Needs an SoC specific compatible string.

> + - reg: Offset and length of UDC register set
> + - interrupts: description of interrupt line
> + - phys: phandle to phy node.
> + - phy-names: name of phy node. Must be usb2drd.

A name is pointless when there's only 1 phy. Is this a device or dual 
role device(DRD)?

> + - extcon: phandle to the extcon device

I don't think extcon should be required. If this is UDC only, I'm not 
sure why you'd need it.

> +
> +Example:
> +
> +	usbdrd_phy: phy@...1c000 {
> +		#phy-cells = <0>;
> +		compatible = "brcm,ns2-drd-phy";
> +		reg = <0x66000000 0x1000>,
> +	}
> +
> +	udc_dwc: usb@...e0000 {
> +		compatible = "snps,dw-ahb-udc";

Doesn't match above.

> +		reg = <0x664e0000 0x2000>;
> +		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
> +		phys = <&usbdrd_phy>;
> +		phy-names = "usb2drd";
> +		extcon = <&usbdrd_phy>";

You are already describing the phy connection, you shouldn't need both.

> +	};
> -- 
> 2.1.0
>