| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <36014e0c-82f8-eeaf-ee2a-6c1e413b957d@kaod.org>
Date: Tue, 6 Dec 2016 16:02:53 +0100
From: Cédric Le Goater <clg@...d.org>
To: Andrew Jeffery <andrew@...id.au>, Corey Minyard <minyard@....org>
Cc: Joel Stanley <joel@....id.au>,
openipmi-developer@...ts.sourceforge.net,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ipmi: bt-bmc: Use a regmap for register access
[ this is a resend bc of some mailing list issues]
On 12/06/2016 03:57 AM, Andrew Jeffery wrote:
> The registers for the bt-bmc device live under the Aspeed LPC
> controller. Devicetree bindings have recently been introduced for the
> LPC controller where the "host" portion of the LPC register space is
> described as a syscon device. Future devicetrees describing the bt-bmc
> device should nest its node under the appropriate "simple-mfd", "syscon"
> compatible node.
>
> This change allows the bt-bmc driver to function with both syscon and
> non-syscon- based devicetree descriptions by always using a regmap for
> register access, either retrieved from the parent syscon device or
> instantiated if none exists.
>
> The patch has been tested on an OpenPOWER Palmetto machine, successfully
> booting, rebooting and powering down the host.
>
> Signed-off-by: Andrew Jeffery <andrew@...id.au>
It would be nice to have an example of the associated binding.
I did not see it. A part from that :
Reviewed-by: Cédric Le Goater <clg@...d.org>
Thanks,
C.
> ---
> drivers/char/ipmi/Kconfig | 1 +
> drivers/char/ipmi/bt-bmc.c | 82 ++++++++++++++++++++++++++++++++++------------
> 2 files changed, 62 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
> index 7f816655cbbf..b5d48d9af124 100644
> --- a/drivers/char/ipmi/Kconfig
> +++ b/drivers/char/ipmi/Kconfig
> @@ -79,6 +79,7 @@ endif # IPMI_HANDLER
>
> config ASPEED_BT_IPMI_BMC
> depends on ARCH_ASPEED
> + depends on REGMAP && REGMAP_MMIO && MFD_SYSCON
> tristate "BT IPMI bmc driver"
> help
> Provides a driver for the BT (Block Transfer) IPMI interface
> diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c
> index fc9e8891eae3..ca1e20f6c6c5 100644
> --- a/drivers/char/ipmi/bt-bmc.c
> +++ b/drivers/char/ipmi/bt-bmc.c
> @@ -12,10 +12,13 @@
> #include <linux/errno.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/miscdevice.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/poll.h>
> +#include <linux/regmap.h>
> #include <linux/sched.h>
> #include <linux/timer.h>
>
> @@ -60,7 +63,8 @@
> struct bt_bmc {
> struct device dev;
> struct miscdevice miscdev;
> - void __iomem *base;
> + struct regmap *map;
> + int offset;
> int irq;
> wait_queue_head_t queue;
> struct timer_list poll_timer;
> @@ -69,14 +73,31 @@ struct bt_bmc {
>
> static atomic_t open_count = ATOMIC_INIT(0);
>
> +static struct regmap_config bt_regmap_cfg = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> +};
> +
> static u8 bt_inb(struct bt_bmc *bt_bmc, int reg)
> {
> - return ioread8(bt_bmc->base + reg);
> + uint32_t val = 0;
> + int rc;
> +
> + rc = regmap_read(bt_bmc->map, bt_bmc->offset + reg, &val);
> + WARN(rc != 0, "%s:%d: regmap_read() failed: %d\n",
> + __FILE__, __LINE__, rc);
> +
> + return rc == 0 ? (u8) val : 0;
> }
>
> static void bt_outb(struct bt_bmc *bt_bmc, u8 data, int reg)
> {
> - iowrite8(data, bt_bmc->base + reg);
> + int rc;
> +
> + rc = regmap_write(bt_bmc->map, bt_bmc->offset + reg, data);
> + WARN(rc != 0, "%s:%d: regmap_write() failed: %d\n",
> + __FILE__, __LINE__, rc);
> }
>
> static void clr_rd_ptr(struct bt_bmc *bt_bmc)
> @@ -367,14 +388,18 @@ static irqreturn_t bt_bmc_irq(int irq, void *arg)
> {
> struct bt_bmc *bt_bmc = arg;
> u32 reg;
> + int rc;
> +
> + rc = regmap_read(bt_bmc->map, bt_bmc->offset + BT_CR2, ®);
> + if (rc)
> + return IRQ_NONE;
>
> - reg = ioread32(bt_bmc->base + BT_CR2);
> reg &= BT_CR2_IRQ_H2B | BT_CR2_IRQ_HBUSY;
> if (!reg)
> return IRQ_NONE;
>
> /* ack pending IRQs */
> - iowrite32(reg, bt_bmc->base + BT_CR2);
> + regmap_write(bt_bmc->map, bt_bmc->offset + BT_CR2, reg);
>
> wake_up(&bt_bmc->queue);
> return IRQ_HANDLED;
> @@ -384,7 +409,6 @@ static int bt_bmc_config_irq(struct bt_bmc *bt_bmc,
> struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> - u32 reg;
> int rc;
>
> bt_bmc->irq = platform_get_irq(pdev, 0);
> @@ -405,18 +429,17 @@ static int bt_bmc_config_irq(struct bt_bmc *bt_bmc,
> * will be cleared (along with B2H) when we can write the next
> * message to the BT buffer
> */
> - reg = ioread32(bt_bmc->base + BT_CR1);
> - reg |= BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY;
> - iowrite32(reg, bt_bmc->base + BT_CR1);
> + rc = regmap_update_bits(bt_bmc->map, bt_bmc->offset + BT_CR1,
> + (BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY),
> + (BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY));
>
> - return 0;
> + return rc;
> }
>
> static int bt_bmc_probe(struct platform_device *pdev)
> {
> struct bt_bmc *bt_bmc;
> struct device *dev;
> - struct resource *res;
> int rc;
>
> if (!pdev || !pdev->dev.of_node)
> @@ -431,10 +454,27 @@ static int bt_bmc_probe(struct platform_device *pdev)
>
> dev_set_drvdata(&pdev->dev, bt_bmc);
>
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - bt_bmc->base = devm_ioremap_resource(&pdev->dev, res);
> - if (IS_ERR(bt_bmc->base))
> - return PTR_ERR(bt_bmc->base);
> + bt_bmc->map = syscon_node_to_regmap(pdev->dev.parent->of_node);
> + if (IS_ERR(bt_bmc->map)) {
> + struct resource *res;
> + void __iomem *base;
> +
> + /*
> + * Assume it's not the MFD-based devicetree description, in
> + * which case generate a regmap ourselves
> + */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + bt_bmc->map = devm_regmap_init_mmio(dev, base, &bt_regmap_cfg);
> + bt_bmc->offset = 0;
> + } else {
> + rc = of_property_read_u32(dev->of_node, "reg", &bt_bmc->offset);
> + if (rc)
> + return rc;
> + }
>
> mutex_init(&bt_bmc->mutex);
> init_waitqueue_head(&bt_bmc->queue);
> @@ -461,12 +501,12 @@ static int bt_bmc_probe(struct platform_device *pdev)
> add_timer(&bt_bmc->poll_timer);
> }
>
> - iowrite32((BT_IO_BASE << BT_CR0_IO_BASE) |
> - (BT_IRQ << BT_CR0_IRQ) |
> - BT_CR0_EN_CLR_SLV_RDP |
> - BT_CR0_EN_CLR_SLV_WRP |
> - BT_CR0_ENABLE_IBT,
> - bt_bmc->base + BT_CR0);
> + regmap_write(bt_bmc->map, bt_bmc->offset + BT_CR0,
> + (BT_IO_BASE << BT_CR0_IO_BASE) |
> + (BT_IRQ << BT_CR0_IRQ) |
> + BT_CR0_EN_CLR_SLV_RDP |
> + BT_CR0_EN_CLR_SLV_WRP |
> + BT_CR0_ENABLE_IBT);
>
> clr_b_busy(bt_bmc);
>
>
Powered by blists - more mailing lists