| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 7 Dec 2016 18:01:18 +0800
From: Yang Ling <gnaygnil@...il.com>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Yang Ling <gnaygnil@...il.com>, wim@...ana.be,
keguang.zhang@...il.com, linux-kernel@...r.kernel.org,
linux-watchdog@...r.kernel.org, linux-mips@...ux-mips.org
Subject: Re: [PATCH v2.4 2/3] watchdog: loongson1: Add Loongson1 SoC watchdog
driver
On Mon, Dec 05, 2016 at 04:05:01PM -0800, Guenter Roeck wrote:
> On Mon, Dec 05, 2016 at 11:00:53PM +0800, Yang Ling wrote:
> > Add watchdog timer specific driver for Loongson1 SoC.
> >
> > Signed-off-by: Yang Ling <gnaygnil@...il.com>
> >
> > ---
> > V2.4:
> > Set DEFAULT_HEARTBEAT to 0.
> > V2.3:
> > Set DEFAULT_HEARTBEAT value to ls1x_wdt->timeout.
> > V2.2:
> > Remove the wide character.
> > Check the return value for clk_get_rate().
> > V2.1 from Kelvin Cheung:
> > Use max_hw_heartbeat_ms instead of max_timeout.
> > V2.0:
> > Increase the value of the default heartbeat.
> > Modify the setup process for register.
> > Order include files and Makefile alphabetically.
> > V1.1:
> > Add a little debugging information.
> > ---
> > drivers/watchdog/Kconfig | 7 ++
> > drivers/watchdog/Makefile | 1 +
> > drivers/watchdog/loongson1_wdt.c | 170 +++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 178 insertions(+)
> > create mode 100644 drivers/watchdog/loongson1_wdt.c
> >
> > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> > index fdd3228..c5b9c6e 100644
> > --- a/drivers/watchdog/Kconfig
> > +++ b/drivers/watchdog/Kconfig
> > @@ -1513,6 +1513,13 @@ config LANTIQ_WDT
> > help
> > Hardware driver for the Lantiq SoC Watchdog Timer.
> >
> > +config LOONGSON1_WDT
> > + tristate "Loongson1 SoC hardware watchdog"
> > + depends on MACH_LOONGSON32
> > + select WATCHDOG_CORE
> > + help
> > + Hardware driver for the Loongson1 SoC Watchdog Timer.
> > +
> > config RALINK_WDT
> > tristate "Ralink SoC watchdog"
> > select WATCHDOG_CORE
> > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> > index caa9f4a..0c3d35e 100644
> > --- a/drivers/watchdog/Makefile
> > +++ b/drivers/watchdog/Makefile
> > @@ -163,6 +163,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
> > obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
> > octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
> > obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
> > +obj-$(CONFIG_LOONGSON1_WDT) += loongson1_wdt.o
> > obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
> > obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
> > obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
> > diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c
> > new file mode 100644
> > index 0000000..1c75bda
> > --- /dev/null
> > +++ b/drivers/watchdog/loongson1_wdt.c
> > @@ -0,0 +1,170 @@
> > +/*
> > + * Copyright (c) 2016 Yang Ling <gnaygnil@...il.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of the GNU General Public License as published by the
> > + * Free Software Foundation; either version 2 of the License, or (at your
> > + * option) any later version.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/watchdog.h>
> > +#include <loongson1.h>
> > +
> > +#define DEFAULT_HEARTBEAT 0
> > +
>
> This is not what I said or meant, and quite pointless.
>
> > +static bool nowayout = WATCHDOG_NOWAYOUT;
> > +module_param(nowayout, bool, 0444);
> > +
> > +static unsigned int heartbeat = DEFAULT_HEARTBEAT;
>
> What I said and meant was that this variable should be initialized with 0,
> ie just be declared as
>
> static unsigned int heartbeat;
>
> Guenter
>
Hi Guenter,
I'm sorry I made a mistake about your intentions.
> > +module_param(heartbeat, uint, 0444);
> > +
> > +struct ls1x_wdt_drvdata {
> > + void __iomem *base;
> > + struct clk *clk;
> > + unsigned long clk_rate;
> > + struct watchdog_device wdt;
> > +};
> > +
> > +static int ls1x_wdt_ping(struct watchdog_device *wdt_dev)
> > +{
> > + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> > +
> > + writel(0x1, drvdata->base + WDT_SET);
> > +
> > + return 0;
> > +}
> > +
> > +static int ls1x_wdt_set_timeout(struct watchdog_device *wdt_dev,
> > + unsigned int timeout)
> > +{
> > + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> > + unsigned int max_hw_heartbeat = wdt_dev->max_hw_heartbeat_ms / 1000;
> > + unsigned int counts;
> > +
> > + wdt_dev->timeout = timeout;
> > +
> > + counts = drvdata->clk_rate * min(timeout, max_hw_heartbeat);
> > + writel(counts, drvdata->base + WDT_TIMER);
> > +
> > + return 0;
> > +}
> > +
> > +static int ls1x_wdt_start(struct watchdog_device *wdt_dev)
> > +{
> > + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> > +
> > + writel(0x1, drvdata->base + WDT_EN);
> > +
> > + return 0;
> > +}
> > +
> > +static int ls1x_wdt_stop(struct watchdog_device *wdt_dev)
> > +{
> > + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> > +
> > + writel(0x0, drvdata->base + WDT_EN);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct watchdog_info ls1x_wdt_info = {
> > + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> > + .identity = "Loongson1 Watchdog",
> > +};
> > +
> > +static const struct watchdog_ops ls1x_wdt_ops = {
> > + .owner = THIS_MODULE,
> > + .start = ls1x_wdt_start,
> > + .stop = ls1x_wdt_stop,
> > + .ping = ls1x_wdt_ping,
> > + .set_timeout = ls1x_wdt_set_timeout,
> > +};
> > +
> > +static int ls1x_wdt_probe(struct platform_device *pdev)
> > +{
> > + struct ls1x_wdt_drvdata *drvdata;
> > + struct watchdog_device *ls1x_wdt;
> > + unsigned long clk_rate;
> > + struct resource *res;
> > + int err;
> > +
> > + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
> > + if (!drvdata)
> > + return -ENOMEM;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + drvdata->base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(drvdata->base))
> > + return PTR_ERR(drvdata->base);
> > +
> > + drvdata->clk = devm_clk_get(&pdev->dev, pdev->name);
> > + if (IS_ERR(drvdata->clk))
> > + return PTR_ERR(drvdata->clk);
> > +
> > + err = clk_prepare_enable(drvdata->clk);
> > + if (err) {
> > + dev_err(&pdev->dev, "clk enable failed\n");
> > + return err;
> > + }
> > +
> > + clk_rate = clk_get_rate(drvdata->clk);
> > + if (!clk_rate) {
> > + err = -EINVAL;
> > + goto err0;
> > + }
> > + drvdata->clk_rate = clk_rate;
> > +
> > + ls1x_wdt = &drvdata->wdt;
> > + ls1x_wdt->info = &ls1x_wdt_info;
> > + ls1x_wdt->ops = &ls1x_wdt_ops;
> > + ls1x_wdt->timeout = DEFAULT_HEARTBEAT;
> > + ls1x_wdt->min_timeout = 1;
> > + ls1x_wdt->max_hw_heartbeat_ms = U32_MAX / clk_rate * 1000;
> > + ls1x_wdt->parent = &pdev->dev;
> > +
> > + watchdog_init_timeout(ls1x_wdt, heartbeat, &pdev->dev);
> > + watchdog_set_nowayout(ls1x_wdt, nowayout);
> > + watchdog_set_drvdata(ls1x_wdt, drvdata);
> > +
> > + err = watchdog_register_device(&drvdata->wdt);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to register watchdog device\n");
> > + goto err0;
> > + }
> > +
> > + platform_set_drvdata(pdev, drvdata);
> > +
> > + dev_info(&pdev->dev, "Loongson1 Watchdog driver registered\n");
> > +
> > + return 0;
> > +err0:
> > + clk_disable_unprepare(drvdata->clk);
> > + return err;
> > +}
> > +
> > +static int ls1x_wdt_remove(struct platform_device *pdev)
> > +{
> > + struct ls1x_wdt_drvdata *drvdata = platform_get_drvdata(pdev);
> > +
> > + watchdog_unregister_device(&drvdata->wdt);
> > + clk_disable_unprepare(drvdata->clk);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver ls1x_wdt_driver = {
> > + .probe = ls1x_wdt_probe,
> > + .remove = ls1x_wdt_remove,
> > + .driver = {
> > + .name = "ls1x-wdt",
> > + },
> > +};
> > +
> > +module_platform_driver(ls1x_wdt_driver);
> > +
> > +MODULE_AUTHOR("Yang Ling <gnaygnil@...il.com>");
> > +MODULE_DESCRIPTION("Loongson1 Watchdog Driver");
> > +MODULE_LICENSE("GPL");
> > --
> > 1.9.1
> >
Powered by blists - more mailing lists