lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1481120409-18103-4-git-send-email-niklass@axis.com>
Date:   Wed, 7 Dec 2016 15:20:05 +0100
From:   Niklas Cassel <niklas.cassel@...s.com>
To:     Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>
CC:     Niklas Cassel <niklass@...s.com>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v3 3/6] net: stmmac: stmmac_platform: fix parsing of DT binding

From: Niklas Cassel <niklas.cassel@...s.com>

commit 64c3b252e9fc ("net: stmmac: fixed the pbl setting with DT")
changed the parsing of the DT binding.

Before 64c3b252e9fc, snps,fixed-burst and snps,mixed-burst were parsed
regardless if the property snps,pbl existed or not.
After the commit, fixed burst and mixed burst are only parsed if
snps,pbl exists. Now when snps,aal has been added, it too is only
parsed if snps,pbl exists.

Since the DT binding does not specify that fixed burst, mixed burst
or aal depend on snps,pbl being specified, undo changes introduced
by 64c3b252e9fc.

The issue commit 64c3b252e9fc ("net: stmmac: fixed the pbl setting with
DT") tries to address is solved in another way:
The databook specifies that all values other than
1, 2, 4, 8, 16, or 32 results in undefined behavior,
so snps,pbl = <0> is invalid.

If pbl is 0 after parsing, set pbl to DEFAULT_DMA_PBL.
This handles the case where the property is omitted, and also handles
the case where the property is specified without any data.

Signed-off-by: Niklas Cassel <niklas.cassel@...s.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  4 +--
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  | 29 +++++++++++-----------
 2 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b1e42ddf0370..b5188122bc15 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1581,8 +1581,8 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 	int atds = 0;
 	int ret = 0;
 
-	if (!priv->plat->dma_cfg) {
-		dev_err(priv->device, "DMA configuration not found\n");
+	if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) {
+		dev_err(priv->device, "Invalid DMA configuration\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index d3b6f92f350a..81800f23a9c4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -304,21 +304,22 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 		plat->force_sf_dma_mode = 1;
 	}
 
-	if (of_find_property(np, "snps,pbl", NULL)) {
-		dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
-				       GFP_KERNEL);
-		if (!dma_cfg) {
-			stmmac_remove_config_dt(pdev, plat);
-			return ERR_PTR(-ENOMEM);
-		}
-		plat->dma_cfg = dma_cfg;
-		of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
-		dma_cfg->aal = of_property_read_bool(np, "snps,aal");
-		dma_cfg->fixed_burst =
-			of_property_read_bool(np, "snps,fixed-burst");
-		dma_cfg->mixed_burst =
-			of_property_read_bool(np, "snps,mixed-burst");
+	dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
+			       GFP_KERNEL);
+	if (!dma_cfg) {
+		stmmac_remove_config_dt(pdev, plat);
+		return ERR_PTR(-ENOMEM);
 	}
+	plat->dma_cfg = dma_cfg;
+
+	of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
+	if (!dma_cfg->pbl)
+		dma_cfg->pbl = DEFAULT_DMA_PBL;
+
+	dma_cfg->aal = of_property_read_bool(np, "snps,aal");
+	dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
+	dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");
+
 	plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
 	if (plat->force_thresh_dma_mode) {
 		plat->force_sf_dma_mode = 0;
-- 
2.1.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ