| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1481129759-159533-1-git-send-email-anurup.m@huawei.com>
Date: Wed, 7 Dec 2016 11:55:59 -0500
From: Anurup M <anurupvasu@...il.com>
To: robh+dt@...nel.org, mark.rutland@....com, will.deacon@....com
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, anurup.m@...wei.com,
zhangshaokun@...ilicon.com, tanxiaojun@...wei.com,
xuwei5@...ilicon.com, sanil.kumar@...ilicon.com,
john.garry@...wei.com, gabriele.paoloni@...wei.com,
shiju.jose@...wei.com, wangkefeng.wang@...wei.com,
linuxarm@...wei.com, shyju.pv@...wei.com, anurupvasu@...il.com
Subject: [PATCH v2 03/10] dt-bindings: perf: hisi: Add Devicetree bindings for Hisilicon SoC PMU
1) Device tree bindings for Hisilicon SoC PMU.
2) Add example for Hisilicon L3 cache and MN PMU.
3) Add child nodes of L3C and MN in djtag bindings example.
Signed-off-by: Anurup M <anurup.m@...wei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@...ilicon.com>
---
.../devicetree/bindings/arm/hisilicon/djtag.txt | 25 ++++++
.../devicetree/bindings/arm/hisilicon/pmu.txt | 98 ++++++++++++++++++++++
2 files changed, 123 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/pmu.txt
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
index 733498e..c885507 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
@@ -27,6 +27,31 @@ Example 1: Djtag for CPU die
scl-id = <0x02>;
/* All connecting components will appear as child nodes */
+
+ pmul3c0 {
+ compatible = "hisilicon,hisi-pmu-l3c-v1";
+ module-id = <0x04 0x02>;
+ };
+
+ pmul3c1 {
+ compatible = "hisilicon,hisi-pmu-l3c-v1";
+ module-id = <0x04 0x04>;
+ };
+
+ pmul3c2 {
+ compatible = "hisilicon,hisi-pmu-l3c-v1";
+ module-id = <0x04 0x01>;
+ };
+
+ pmul3c3 {
+ compatible = "hisilicon,hisi-pmu-l3c-v1";
+ module-id = <0x04 0x08>;
+ };
+
+ pmumn0 {
+ compatible = "hisilicon,hisi-pmu-mn-v1";
+ module-id = <0x0b>;
+ };
};
Example 2: Djtag for IO die
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/pmu.txt b/Documentation/devicetree/bindings/arm/hisilicon/pmu.txt
new file mode 100644
index 0000000..e2160ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/pmu.txt
@@ -0,0 +1,98 @@
+Hisilicon SoC HiP05/06/07 ARMv8 PMU
+===================================
+
+The Hisilicon SoC chips like HiP05/06/07 etc. consist of various independent
+system device PMUs such as L3 cache (L3C) and Miscellaneous Nodes(MN). These
+PMU devices are independent and have hardware logic to gather statistics and
+performance information.
+
+HiSilicon SoC chip is encapsulated by multiple CPU and IO dies. The CPU die
+is called as Super CPU cluster (SCCL) which includes 16 cpu-cores. Every SCCL
+in HiP05/06/07 chips are further grouped as CPU clusters (CCL) which includes
+4 cpu-cores each.
+e.g. In the case of HiP05/06/07, each SCCL has 1 L3 cache and 1 MN PMU device.
+The L3 cache is further grouped as 4 L3 cache banks in a SCCL.
+
+The Hisilicon SoC PMU DT node bindings for uncore PMU devices are as below.
+For PMU devices like L3 cache. MN etc. which are accessed using the djtag,
+the parent node will be the djtag node of the corresponding CPU die (SCCL).
+
+L3 cache
+---------
+The L3 cache is dedicated for each SCCL. Each SCCL in HiP05/06/07 chips have 4
+L3 cache banks. Each L3 cache bank have separate DT nodes.
+
+Required properties:
+
+ - compatible : This value should be as follows
+ (a) "hisilicon,hisi-pmu-l3c-v1" for v1 hw in HiP05/06 chips
+ (b) "hisilicon,hisi-pmu-l3c-v2" for v2 hw in HiP07 chip
+
+ - module-id : This property is a combination of two values in the below order.
+ a) Module ID: The module identifier for djtag.
+ b) Instance or Bank ID: This will identify the L3 cache bank
+ or instance.
+
+Optional properties:
+
+ - interrupt-parent : A phandle indicating which interrupt controller
+ this PMU signals interrupts to.
+
+ - interrupts : Interrupt lines used by this L3 cache bank.
+
+ *The counter overflow IRQ is not supported in v1 hardware (HiP05/06).
+
+Miscellaneous Node
+------------------
+The MN is dedicated for each SCCL and hence there are separate DT nodes for MN
+for each SCCL.
+
+Required properties:
+
+ - compatible : This value should be as follows
+ (a) "hisilicon,hisi-pmu-mn-v1" for v1 hw in HiP05/06 chips
+ (b) "hisilicon,hisi-pmu-mn-v2" for v2 hw in HiP07 chip
+
+ - module-id : Module ID to input for djtag.
+
+Optional properties:
+
+ - interrupt-parent : A phandle indicating which interrupt controller
+ this PMU signals interrupts to.
+
+ - interrupts : Interrupt lines used by this PMU.
+
+ *The counter overflow IRQ is not supported in v1 hardware (HiP05/06).
+
+Example:
+
+ djtag0: djtag@...10000 {
+ compatible = "hisilicon,hisi-djtag-v1";
+ reg = <0x0 0x80010000 0x0 0x10000>;
+ scl-id = <0x02>;
+
+ pmul3c0 {
+ compatible = "hisilicon,hisi-pmu-l3c-v1";
+ module-id = <0x04 0x02>;
+ };
+
+ pmul3c1 {
+ compatible = "hisilicon,hisi-pmu-l3c-v1";
+ module-id = <0x04 0x04>;
+ };
+
+ pmul3c2 {
+ compatible = "hisilicon,hisi-pmu-l3c-v1";
+ module-id = <0x04 0x01>;
+ };
+
+ pmul3c3 {
+ compatible = "hisilicon,hisi-pmu-l3c-v1";
+ module-id = <0x04 0x08>;
+ };
+
+ pmumn0 {
+ compatible = "hisilicon,hisi-pmu-mn-v1";
+ module-id = <0x0b>;
+ };
+ };
--
2.1.4
Powered by blists - more mailing lists