[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAKv+Gu_XsKU6godiQC7wVDmCUC9bZL=kv0RarTOTATuQ5EZp2Q@mail.gmail.com>
Date: Fri, 9 Dec 2016 12:19:38 +0000
From: Ard Biesheuvel <ard.biesheuvel@...aro.org>
To: Yisheng Xie <xieyisheng1@...wei.com>
Cc: Robert Richter <rrichter@...ium.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
David Daney <david.daney@...ium.com>,
Mark Rutland <mark.rutland@....com>,
Hanjun Guo <hanjun.guo@...aro.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] arm64: mm: Fix memmap to be initialized for the entire section
On 9 December 2016 at 12:14, Yisheng Xie <xieyisheng1@...wei.com> wrote:
> Hi Robert,
> We have merged your patch to 4.9.0-rc8, however we still meet the similar problem
> on our D05 board:
>
To be clear: does this issue also occur on D05 *without* the patch?
> -----------------
> [ 5.081971] ------------[ cut here ]------------
> [ 5.086668] kernel BUG at mm/page_alloc.c:1863!
> [ 5.091281] Internal error: Oops - BUG: 0 [#1] SMP
> [ 5.096159] Modules linked in:
> [ 5.099265] CPU: 61 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc8+ #58
> [ 5.105822] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 UEFI 16.08 RC1 12/08/2016
> [ 5.114860] task: fffffe13f23d7400 task.stack: fffffe13f66f8000
> [ 5.120903] PC is at move_freepages+0x170/0x180
> [ 5.125514] LR is at move_freepages_block+0xa8/0xb8
> [ 5.130479] pc : [<fffffc00081e9588>] lr : [<fffffc00081e9640>] pstate: 200000c5
> [ 5.138008] sp : fffffe13f66fb910
> [ 5.141375] x29: fffffe13f66fb910 x28: 00000000ffffff80
> [ 5.146784] x27: fffffdff800b0000 x26: fffffe13fbf62b90
> [ 5.152193] x25: 000000000000000a x24: fffffdff800b0020
> [ 5.157598] x23: 0000000000000000 x22: fffffdff800b0000
> [ 5.163006] x21: fffffdff800fffc0 x20: fffffe13fbf62680
> [ 5.168412] x19: fffffdff80080000 x18: 000000004c4d6d26
> [ 5.173820] x17: 0000000000000000 x16: 0000000000000000
> [ 5.179226] x15: 000000005c589429 x14: 0000000000000000
> [ 5.184634] x13: 0000000000000000 x12: 00000000fe2ce6e0
> [ 5.190039] x11: 00000000bb5b525b x10: 00000000bb48417b
> [ 5.195446] x9 : 0000000000000068 x8 : 0000000000000000
> [ 5.200854] x7 : fffffe13fbff2680 x6 : 0000000000000001
> [ 5.206260] x5 : fffffc0008e12328 x4 : 0000000000000000
> [ 5.211667] x3 : fffffe13fbf62680 x2 : 0000000000000000
> [ 5.217073] x1 : fffffe13fbff2680 x0 : fffffe13fbf62680
> [...]
> [ 5.768991] [<fffffc00081e9588>] move_freepages+0x170/0x180
> [ 5.774664] [<fffffc00081e9640>] move_freepages_block+0xa8/0xb8
> [ 5.780691] [<fffffc00081e9bbc>] __rmqueue+0x494/0x5f0
> [ 5.785921] [<fffffc00081eb10c>] get_page_from_freelist+0x5ec/0xb58
> [ 5.792302] [<fffffc00081ebc4c>] __alloc_pages_nodemask+0x144/0xd08
> [ 5.798687] [<fffffc0008240514>] alloc_page_interleave+0x64/0xc0
> [ 5.804801] [<fffffc0008240b20>] alloc_pages_current+0x108/0x168
> [ 5.810920] [<fffffc0008c75410>] atomic_pool_init+0x78/0x1cc
> [ 5.816680] [<fffffc0008c755a0>] arm64_dma_init+0x3c/0x44
> [ 5.822180] [<fffffc0008082d94>] do_one_initcall+0x44/0x138
> [ 5.827853] [<fffffc0008c70d54>] kernel_init_freeable+0x1ec/0x28c
> [ 5.834060] [<fffffc00088a79f0>] kernel_init+0x18/0x110
> [ 5.839378] [<fffffc0008082b30>] ret_from_fork+0x10/0x20
> [ 5.844785] Code: 9108a021 9400afc5 d4210000 d503201f (d4210000)
> [ 5.851024] ---[ end trace 3382df1ae82057db ]---
>
>
> On 2016/12/1 2:21, Robert Richter wrote:
>> On ThunderX systems with certain memory configurations we see the
>> following BUG_ON():
>>
>> kernel BUG at mm/page_alloc.c:1848!
>>
>> This happens for some configs with 64k page size enabled. The BUG_ON()
>> checks if start and end page of a memmap range belongs to the same
>> zone.
>>
>> The BUG_ON() check fails if a memory zone contains NOMAP regions. In
>> this case the node information of those pages is not initialized. This
>> causes an inconsistency of the page links with wrong zone and node
>> information for that pages. NOMAP pages from node 1 still point to the
>> mem zone from node 0 and have the wrong nid assigned.
>>
>> The reason for the mis-configuration is a change in pfn_valid() which
>> reports pages marked NOMAP as invalid:
>>
>> 68709f45385a arm64: only consider memblocks with NOMAP cleared for linear mapping
>>
>> This causes pages marked as nomap being no long reassigned to the new
>> zone in memmap_init_zone() by calling __init_single_pfn().
>>
>> Fixing this by restoring the old behavior of pfn_valid() to use
>> memblock_is_memory(). Also changing users of pfn_valid() in arm64 code
>> to use memblock_is_map_memory() where necessary. This only affects
>> code in ioremap.c. The code in mmu.c still can use the new version of
>> pfn_valid().
>>
>> As a consequence, pfn_valid() can not be used to check if a physical
>> page is RAM. It just checks if there is an underlying memmap with a
>> valid struct page. Moreover, for performance reasons the whole memmap
>> (with pageblock_nr_pages number of pages) has valid pfns (SPARSEMEM
>> config). The memory range is extended to fit the alignment of the
>> memmap. Thus, pfn_valid() may return true for pfns that do not map to
>> physical memory. Those pages are simply not reported to the mm, they
>> are not marked reserved nor added to the list of free pages. Other
>> functions such a page_is_ram() or memblock_is_map_ memory() must be
>> used to check for memory and if the page can be mapped with the linear
>> mapping.
>>
>> Since NOMAP mem ranges may need to be mapped with different mem
>> attributes (e.g. read-only or non-caching) we can not use linear
>> mapping here. The use of memblock_is_memory() in pfn_valid() may not
>> break this behaviour. Since commit:
>>
>> e7cd190385d1 arm64: mark reserved memblock regions explicitly in iomem
>>
>> NOMAP mem resources are no longer marked as system RAM (IORESOURCE_
>> SYSTEM_RAM). Now page_is_ram() and region_intersects() (see
>> memremap()) do not detect NOMAP mem as system ram and NOMAP mem is not
>> added to the linear mapping as system RAM is.
>>
>> v2:
>>
>> * Added Ack
>> * updated description to reflect the discussion
>>
>> Acked-by: Ard Biesheuvel <ard.biesheuvel@...aro.org>
>> Signed-off-by: Robert Richter <rrichter@...ium.com>
>> ---
>> arch/arm64/mm/init.c | 2 +-
>> arch/arm64/mm/ioremap.c | 5 +++--
>> 2 files changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
>> index 212c4d1e2f26..166911f4a2e6 100644
>> --- a/arch/arm64/mm/init.c
>> +++ b/arch/arm64/mm/init.c
>> @@ -147,7 +147,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
>> #ifdef CONFIG_HAVE_ARCH_PFN_VALID
>> int pfn_valid(unsigned long pfn)
>> {
>> - return memblock_is_map_memory(pfn << PAGE_SHIFT);
>> + return memblock_is_memory(pfn << PAGE_SHIFT);
>> }
>> EXPORT_SYMBOL(pfn_valid);
>> #endif
>> diff --git a/arch/arm64/mm/ioremap.c b/arch/arm64/mm/ioremap.c
>> index 01e88c8bcab0..c17c220b0c48 100644
>> --- a/arch/arm64/mm/ioremap.c
>> +++ b/arch/arm64/mm/ioremap.c
>> @@ -21,6 +21,7 @@
>> */
>>
>> #include <linux/export.h>
>> +#include <linux/memblock.h>
>> #include <linux/mm.h>
>> #include <linux/vmalloc.h>
>> #include <linux/io.h>
>> @@ -55,7 +56,7 @@ static void __iomem *__ioremap_caller(phys_addr_t phys_addr, size_t size,
>> /*
>> * Don't allow RAM to be mapped.
>> */
>> - if (WARN_ON(pfn_valid(__phys_to_pfn(phys_addr))))
>> + if (WARN_ON(memblock_is_map_memory(phys_addr)))
>> return NULL;
>>
>> area = get_vm_area_caller(size, VM_IOREMAP, caller);
>> @@ -96,7 +97,7 @@ EXPORT_SYMBOL(__iounmap);
>> void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size)
>> {
>> /* For normal memory we already have a cacheable mapping. */
>> - if (pfn_valid(__phys_to_pfn(phys_addr)))
>> + if (memblock_is_map_memory(phys_addr))
>> return (void __iomem *)__phys_to_virt(phys_addr);
>>
>> return __ioremap_caller(phys_addr, size, __pgprot(PROT_NORMAL),
>>
>
Powered by blists - more mailing lists