[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1481494905-18037-2-git-send-email-bgolaszewski@baylibre.com>
Date: Sun, 11 Dec 2016 23:21:44 +0100
From: Bartosz Golaszewski <bgolaszewski@...libre.com>
To: Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Kevin Hilman <khilman@...libre.com>,
Patrick Titiano <ptitiano@...libre.com>,
Neil Armstrong <narmstrong@...libre.com>,
Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>,
linux-gpio@...r.kernel.org, Sebastian Reichel <sre@...nel.org>,
linux-pm@...r.kernel.org, Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: [PATCH 1/2] devicetree: power: add bindings for GPIO-driven power switches
Some boards are equipped with simple, GPIO-driven power load switches.
An example of such ICs is the TI tps229* series.
Add device tree bindings allowing to describe them.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
---
.../bindings/power/gpio-power-switch.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/gpio-power-switch.txt
diff --git a/Documentation/devicetree/bindings/power/gpio-power-switch.txt b/Documentation/devicetree/bindings/power/gpio-power-switch.txt
new file mode 100644
index 0000000..21420ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/gpio-power-switch.txt
@@ -0,0 +1,25 @@
+GPIO Power Switch
+-----------------
+
+This is the device tree binding for simple, GPIO-driven power load switches
+that do not have any control signals.
+
+Required properties:
+
+- compatible: must be "gpio-power-switch"
+- power-gpios: phandle for the GPIO driving the power load switch
+
+Optional properties:
+
+- power-switch-name: the name of the power switch
+- power-switch-on: the power switch GPIO is driven high by default
+
+Example
+-------
+
+acme_probe0_power_switch: gpio_power_switch@0 {
+ compatible = "gpio-power-switch";
+ power-switch-name = "acme_probe0_switch";
+ power-gpios = <&pca9535 1 GPIO_ACTIVE_HIGH>;
+ power-switch-on;
+};
--
2.9.3
Powered by blists - more mailing lists