| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHp75VeEVvTSyT2jcr8u53pm52Jq0WmPLAVKdKn=ts3M5474YA@mail.gmail.com>
Date: Tue, 13 Dec 2016 02:01:06 +0200
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Irina Tirdea <irina.tirdea@...el.com>
Cc: linux-clk@...r.kernel.org, "x86@...nel.org" <x86@...nel.org>,
platform-driver-x86@...r.kernel.org,
Stephen Boyd <sboyd@...eaurora.org>,
Darren Hart <dvhart@...radead.org>,
Thomas Gleixner <tglx@...utronix.de>,
Michael Turquette <mturquette@...libre.com>,
Ingo Molnar <mingo@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>,
ALSA Development Mailing List <alsa-devel@...a-project.org>,
Mark Brown <broonie@...nel.org>, Takashi Iwai <tiwai@...e.com>,
Pierre-Louis Bossart <pierre-louis.bossart@...el.com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Len Brown <lenb@...nel.org>,
"linux-acpi@...r.kernel.org" <linux-acpi@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
Subject: Re: [PATCH v6 3/3] platform/x86: Enable Atom PMC platform clocks
On Fri, Dec 9, 2016 at 8:01 PM, Irina Tirdea <irina.tirdea@...el.com> wrote:
> The BayTrail and CherryTrail platforms provide platform clocks
> through their Power Management Controller (PMC).
>
> The SoC supports up to 6 clocks (PMC_PLT_CLK[5:0]) with a
> frequency of either 19.2 MHz (PLL) or 25 MHz (XTAL) for BayTrail
> an a frequency of 19.2 MHz (XTAL) for CherryTrail. These clocks
> are available for general system use, where appropriate. For example,
> the usage for platform clocks suggested in the datasheet is the
> following:
> PLT_CLK[2:0] - Camera
> PLT_CLK[3] - Audio Codec
> PLT_CLK[4] -
> PLT_CLK[5] - COMMs
>
> Signed-off-by: Irina Tirdea <irina.tirdea@...el.com>
> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
Same comments as per patch 1/3.
> ---
> drivers/platform/x86/Kconfig | 1 +
> drivers/platform/x86/pmc_atom.c | 78 ++++++++++++++++++++++++++++--
> include/linux/platform_data/x86/pmc_atom.h | 3 ++
Same.
> 3 files changed, 79 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 21dce1e..c1b07ed 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1032,3 +1032,4 @@ endif # X86_PLATFORM_DEVICES
> config PMC_ATOM
> def_bool y
> depends on PCI
> + select COMMON_CLK
> diff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c
> index b53fbc1..324c44f 100644
> --- a/drivers/platform/x86/pmc_atom.c
> +++ b/drivers/platform/x86/pmc_atom.c
> @@ -22,6 +22,8 @@
> #include <linux/seq_file.h>
> #include <linux/io.h>
> #include <linux/platform_data/x86/pmc_atom.h>
> +#include <linux/platform_device.h>
It should go after (e comes after a).
> +#include <linux/platform_data/x86/clk-byt-plt.h>
>
> struct pmc_bit_map {
> const char *name;
> @@ -36,6 +38,11 @@ struct pmc_reg_map {
> const struct pmc_bit_map *pss;
> };
>
> +struct pmc_data {
> + const struct pmc_reg_map *map;
> + const struct pmc_clk *clks;
clks -> clocks
> +};
> +
> struct pmc_dev {
> u32 base_addr;
> void __iomem *regmap;
> @@ -49,6 +56,29 @@ struct pmc_dev {
> static struct pmc_dev pmc_device;
> static u32 acpi_base_addr;
>
> +static const struct pmc_clk byt_clks[] = {
> + {
> + .name = "xtal",
> + .freq = 25000000,
> + .parent_name = NULL,
> + },
> + {
> + .name = "pll",
> + .freq = 19200000,
> + .parent_name = "xtal",
> + },
> + {},
> +};
> +
> +static const struct pmc_clk cht_clks[] = {
> + {
> + .name = "xtal",
> + .freq = 19200000,
> + .parent_name = NULL,
> + },
> + {},
> +};
> +
Okay, this is definition of clock trees. It means that clk-x86-pmc can
be used basically on any of PMC that provides similar clock tree,
right?
> static const struct pmc_bit_map d3_sts_0_map[] = {
> {"LPSS1_F0_DMA", BIT_LPSS1_F0_DMA},
> {"LPSS1_F1_PWM1", BIT_LPSS1_F1_PWM1},
> @@ -168,6 +198,16 @@ struct pmc_dev {
> .pss = cht_pss_map,
> };
>
> +static const struct pmc_data byt_data = {
> + .map = &byt_reg_map,
> + .clks = byt_clks,
> +};
> +
> +static const struct pmc_data cht_data = {
> + .map = &cht_reg_map,
> + .clks = cht_clks,
> +};
> +
> static inline u32 pmc_reg_read(struct pmc_dev *pmc, int reg_offset)
> {
> return readl(pmc->regmap + reg_offset);
> @@ -381,10 +421,36 @@ static int pmc_dbgfs_register(struct pmc_dev *pmc)
> }
> #endif /* CONFIG_DEBUG_FS */
>
> +static int pmc_setup_clks(struct pci_dev *pdev, void __iomem *pmc_regmap,
_clks -> _clocks
> + const struct pmc_data *pmc_data)
> +{
> + struct platform_device *clkdev;
> + struct pmc_clk_data *clk_data;
> +
> + clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
Can we just use stack for that?
> + if (!clk_data)
> + return -ENOMEM;
> +
> + clk_data->base = pmc_regmap + PMC_CLK_CTL_0;
> + clk_data->clks = pmc_data->clks;
> +
> + clkdev = platform_device_register_data(&pdev->dev, "clk-byt-plt", -1,
-1 has a definition in this case. AUTO smth... or NONE, I don't
remember which one.
> + clk_data, sizeof(*clk_data));
> + if (IS_ERR(clkdev)) {
> + kfree(clk_data);
> + return PTR_ERR(clkdev);
> + }
> +
> + kfree(clk_data);
> +
> + return 0;
> +}
> +
> static int pmc_setup_dev(struct pci_dev *pdev, const struct pci_device_id *ent)
> {
> struct pmc_dev *pmc = &pmc_device;
> - const struct pmc_reg_map *map = (struct pmc_reg_map *)ent->driver_data;
> + const struct pmc_data *data = (struct pmc_data *)ent->driver_data;
> + const struct pmc_reg_map *map = data->map;
> int ret;
>
> /* Obtain ACPI base address */
> @@ -413,6 +479,12 @@ static int pmc_setup_dev(struct pci_dev *pdev, const struct pci_device_id *ent)
> if (ret)
> dev_warn(&pdev->dev, "debugfs register failed\n");
>
> + /* Register platform clocks - PMC_PLT_CLK [5:0] */
> + ret = pmc_setup_clks(pdev, pmc->regmap, data);
> + if (ret)
> + dev_warn(&pdev->dev, "platform clocks register failed: %d\n",
> + ret);
> +
> pmc->init = true;
> return ret;
> }
> @@ -423,8 +495,8 @@ static int pmc_setup_dev(struct pci_dev *pdev, const struct pci_device_id *ent)
> * used by pci_match_id() call below.
> */
> static const struct pci_device_id pmc_pci_ids[] = {
> - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_VLV_PMC), (kernel_ulong_t)&byt_reg_map },
> - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_CHT_PMC), (kernel_ulong_t)&cht_reg_map },
> + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_VLV_PMC), (kernel_ulong_t)&byt_data },
> + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_CHT_PMC), (kernel_ulong_t)&cht_data },
> { 0, },
> };
>
> diff --git a/include/linux/platform_data/x86/pmc_atom.h b/include/linux/platform_data/x86/pmc_atom.h
> index aa8744c..2d310cf 100644
> --- a/include/linux/platform_data/x86/pmc_atom.h
> +++ b/include/linux/platform_data/x86/pmc_atom.h
> @@ -50,6 +50,9 @@
> BIT_ORED_DEDICATED_IRQ_GPSC | \
> BIT_SHARED_IRQ_GPSS)
>
> +/* Platform clock control registers */
> +#define PMC_CLK_CTL_0 0x60
> +
> /* The timers acumulate time spent in sleep state */
Typo:
accumulate
> #define PMC_S0IR_TMR 0x80
> #define PMC_S0I1_TMR 0x84
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists