| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 13 Dec 2016 15:57:28 +0530
From: Sreekanth Reddy <sreekanth.reddy@...adcom.com>
To: Adam Manzanares <adam.manzanares@...t.com>
Cc: Sathya Prakash <sathya.prakash@...adcom.com>,
Chaitra Basappa <chaitra.basappa@...adcom.com>,
Suganath Prabu Subramani
<suganath-prabu.subramani@...adcom.com>,
"James E.J. Bottomley" <jejb@...ux.vnet.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
PDL-MPT-FUSIONLINUX <MPT-FusionLinux.pdl@...adcom.com>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Adam Manzanares <adam.manzanares@....com>
Subject: Re: [PATCH v2] mpt3sas: Recognize and act on iopriority info
On Tue, Dec 13, 2016 at 6:01 AM, Adam Manzanares
<adam.manzanares@...t.com> wrote:
> From: Adam Manzanares <adam.manzanares@....com>
>
> This patch adds support for request iopriority handling in the
> mpt3sas layer. This works only when a ATA device is behind the
> SATL. The ATA device also has to indicate that it supports
> command priorities in the identify information that is pulled from
> the SATL.
>
> This patch depends on block: Add iocontext priority to request
>
> v2:
> - Get iopriority class only if sysfs variable is set.
>
> Signed-off-by: Adam Manzanares <adam.manzanares@....com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@...adcom.com>
> ---
> drivers/scsi/mpt3sas/mpt3sas_base.h | 6 +++++
> drivers/scsi/mpt3sas/mpt3sas_ctl.c | 43 ++++++++++++++++++++++++++++++++++--
> drivers/scsi/mpt3sas/mpt3sas_scsih.c | 34 +++++++++++++++++++++++++++-
> 3 files changed, 80 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
> index 3e71bc1..354cdc7 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.h
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
> @@ -402,6 +402,9 @@ struct MPT3SAS_DEVICE {
> u8 block;
> u8 tlr_snoop_check;
> u8 ignore_delay_remove;
> + /* Iopriority Command Handling */
> + u8 ncq_prio_enable;
> +
> };
>
> #define MPT3_CMD_NOT_USED 0x8000 /* free */
> @@ -1449,4 +1452,7 @@ mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
> struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
> u16 smid);
>
> +/* NCQ Prio Handling Check */
> +bool scsih_ncq_prio_supp(struct scsi_device *sdev);
> +
> #endif /* MPT3SAS_BASE_H_INCLUDED */
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
> index 26cdc12..3ad8339 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
> @@ -3290,8 +3290,6 @@ static DEVICE_ATTR(diag_trigger_mpi, S_IRUGO | S_IWUSR,
>
> /*********** diagnostic trigger suppport *** END ****************************/
>
> -
> -
> /*****************************************/
>
> struct device_attribute *mpt3sas_host_attrs[] = {
> @@ -3367,9 +3365,50 @@ _ctl_device_handle_show(struct device *dev, struct device_attribute *attr,
> }
> static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL);
>
> +/**
> + * _ctl_device_ncq_io_prio_show - send prioritized io commands to device
> + * @dev - pointer to embedded device
> + * @buf - the buffer returned
> + *
> + * A sysfs 'read/write' sdev attribute, only works with SATA
> + */
> +static ssize_t
> +_ctl_device_ncq_prio_enable_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct scsi_device *sdev = to_scsi_device(dev);
> + struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n",
> + sas_device_priv_data->ncq_prio_enable);
> +}
> +
> +static ssize_t
> +_ctl_device_ncq_prio_enable_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct scsi_device *sdev = to_scsi_device(dev);
> + struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
> + bool ncq_prio_enable = 0;
> +
> + if (kstrtobool(buf, &ncq_prio_enable))
> + return -EINVAL;
> +
> + if (!scsih_ncq_prio_supp(sdev))
> + return -EINVAL;
> +
> + sas_device_priv_data->ncq_prio_enable = ncq_prio_enable;
> + return strlen(buf);
> +}
> +static DEVICE_ATTR(sas_ncq_prio_enable, S_IRUGO | S_IWUSR,
> + _ctl_device_ncq_prio_enable_show,
> + _ctl_device_ncq_prio_enable_store);
> +
> struct device_attribute *mpt3sas_dev_attrs[] = {
> &dev_attr_sas_address,
> &dev_attr_sas_device_handle,
> + &dev_attr_sas_ncq_prio_enable,
> NULL,
> };
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> index 209a969..a6d1045 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> @@ -4030,6 +4030,8 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
> struct MPT3SAS_DEVICE *sas_device_priv_data;
> struct MPT3SAS_TARGET *sas_target_priv_data;
> struct _raid_device *raid_device;
> + struct request *rq = scmd->request;
> + int class;
> Mpi2SCSIIORequest_t *mpi_request;
> u32 mpi_control;
> u16 smid;
> @@ -4085,7 +4087,12 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
>
> /* set tags */
> mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
> -
> + /* NCQ Prio supported, make sure control indicated high priority */
> + if (sas_device_priv_data->ncq_prio_enable) {
> + class = IOPRIO_PRIO_CLASS(req_get_ioprio(rq));
> + if (class == IOPRIO_CLASS_RT)
> + mpi_control |= 1 << MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT;
> + }
> /* Make sure Device is not raid volume.
> * We do not expose raid functionality to upper layer for warpdrive.
> */
> @@ -9031,6 +9038,31 @@ scsih_pci_mmio_enabled(struct pci_dev *pdev)
> return PCI_ERS_RESULT_RECOVERED;
> }
>
> +/**
> + * scsih__ncq_prio_supp - Check for NCQ command priority support
> + * @sdev: scsi device struct
> + *
> + * This is called when a user indicates they would like to enable
> + * ncq command priorities. This works only on SATA devices.
> + */
> +bool scsih_ncq_prio_supp(struct scsi_device *sdev)
> +{
> + unsigned char *buf;
> + bool ncq_prio_supp = false;
> +
> + if (!scsi_device_supports_vpd(sdev))
> + return ncq_prio_supp;
> +
> + buf = kmalloc(SCSI_VPD_PG_LEN, GFP_KERNEL);
> + if (!buf)
> + return ncq_prio_supp;
> +
> + if (!scsi_get_vpd_page(sdev, 0x89, buf, SCSI_VPD_PG_LEN))
> + ncq_prio_supp = (buf[213] >> 4) & 1;
> +
> + kfree(buf);
> + return ncq_prio_supp;
> +}
> /*
> * The pci device ids are defined in mpi/mpi2_cnfg.h.
> */
> --
> 2.7.4
>
Powered by blists - more mailing lists