| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1481590582-14679-1-git-send-email-subhashj@codeaurora.org>
Date: Mon, 12 Dec 2016 16:56:18 -0800
From: Subhash Jadavani <subhashj@...eaurora.org>
To: vinholikatti@...il.com, jejb@...ux.vnet.ibm.com,
martin.petersen@...cle.com
Cc: linux-scsi@...r.kernel.org, Lee Susman <lsusman@...eaurora.org>,
Subhash Jadavani <subhashj@...eaurora.org>,
Steven Rostedt <rostedt@...dmis.org>,
Ingo Molnar <mingo@...hat.com>,
Gilad Broner <gbroner@...eaurora.org>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v1 11/12] scsi: ufs: add trace event for ufs commands
From: Lee Susman <lsusman@...eaurora.org>
Use the ftrace infrastructure to conditionally trace ufs command events.
New trace event is created, which samples the following ufs command data:
- device name
- optional identification string
- task tag
- doorbell register
- number of transfer bytes
- interrupt status register
- request start LBA
- command opcode
Currently we only fully trace read(10) and write(10) commands.
All other commands which pass through ufshcd_send_command() will be
printed with "-1" in the lba and transfer_len fields.
Usage:
echo 1 > /sys/kernel/debug/tracing/events/ufs/enable
cat /sys/kernel/debug/tracing/trace_pipe
Signed-off-by: Lee Susman <lsusman@...eaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@...eaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 52 +++++++++++++++++++++++++++++++++++++++++++++-
include/trace/events/ufs.h | 38 +++++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 531e690..c19cf40 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -301,6 +301,51 @@ static inline void ufshcd_remove_non_printable(char *val)
*val = ' ';
}
+#ifdef CONFIG_TRACEPOINTS
+static void ufshcd_add_command_trace(struct ufs_hba *hba,
+ unsigned int tag, const char *str)
+{
+ sector_t lba = -1;
+ u8 opcode = 0;
+ u32 intr, doorbell;
+ struct ufshcd_lrb *lrbp;
+ int transfer_len = -1;
+
+ lrbp = &hba->lrb[tag];
+
+ if (lrbp->cmd) { /* data phase exists */
+ opcode = (u8)(*lrbp->cmd->cmnd);
+ if ((opcode == READ_10) || (opcode == WRITE_10)) {
+ /*
+ * Currently we only fully trace read(10) and write(10)
+ * commands
+ */
+ if (lrbp->cmd->request && lrbp->cmd->request->bio)
+ lba =
+ lrbp->cmd->request->bio->bi_iter.bi_sector;
+ transfer_len = be32_to_cpu(
+ lrbp->ucd_req_ptr->sc.exp_data_transfer_len);
+ }
+ }
+
+ intr = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
+ doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
+ trace_ufshcd_command(dev_name(hba->dev), str, tag,
+ doorbell, transfer_len, intr, lba, opcode);
+}
+
+static inline void ufshcd_cond_add_cmd_trace(struct ufs_hba *hba,
+ unsigned int tag, const char *str)
+{
+ ufshcd_add_command_trace(hba, tag, str);
+}
+#else
+static inline void ufshcd_cond_add_cmd_trace(struct ufs_hba *hba,
+ unsigned int tag, const char *str)
+{
+}
+#endif
+
static void ufshcd_print_host_regs(struct ufs_hba *hba)
{
/*
@@ -1193,6 +1238,7 @@ void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL);
/* Make sure that doorbell is committed immediately */
wmb();
+ ufshcd_cond_add_cmd_trace(hba, task_tag, "send");
}
/**
@@ -3982,6 +4028,7 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
lrbp = &hba->lrb[index];
cmd = lrbp->cmd;
if (cmd) {
+ ufshcd_cond_add_cmd_trace(hba, index, "complete");
result = ufshcd_transfer_rsp_status(hba, lrbp);
scsi_dma_unmap(cmd);
cmd->result = result;
@@ -3993,8 +4040,11 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
__ufshcd_release(hba);
} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE ||
lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) {
- if (hba->dev_cmd.complete)
+ if (hba->dev_cmd.complete) {
+ ufshcd_cond_add_cmd_trace(hba, index,
+ "dev_complete");
complete(hba->dev_cmd.complete);
+ }
}
}
diff --git a/include/trace/events/ufs.h b/include/trace/events/ufs.h
index 8bce504..d0ed0cf 100644
--- a/include/trace/events/ufs.h
+++ b/include/trace/events/ufs.h
@@ -183,6 +183,44 @@
TP_PROTO(const char *dev_name, int err, s64 usecs,
const char *dev_state, const char *link_state),
TP_ARGS(dev_name, err, usecs, dev_state, link_state));
+
+TRACE_EVENT(ufshcd_command,
+ TP_PROTO(const char *dev_name, const char *str, unsigned int tag,
+ u32 doorbell, int transfer_len, u32 intr, u64 lba,
+ u8 opcode),
+
+ TP_ARGS(dev_name, str, tag, doorbell, transfer_len, intr, lba, opcode),
+
+ TP_STRUCT__entry(
+ __string(dev_name, dev_name)
+ __string(str, str)
+ __field(unsigned int, tag)
+ __field(u32, doorbell)
+ __field(int, transfer_len)
+ __field(u32, intr)
+ __field(u64, lba)
+ __field(u8, opcode)
+ ),
+
+ TP_fast_assign(
+ __assign_str(dev_name, dev_name);
+ __assign_str(str, str);
+ __entry->tag = tag;
+ __entry->doorbell = doorbell;
+ __entry->transfer_len = transfer_len;
+ __entry->intr = intr;
+ __entry->lba = lba;
+ __entry->opcode = opcode;
+ ),
+
+ TP_printk(
+ "%s: %s: tag: %u, DB: 0x%x, size: %d, IS: %u, LBA: %llu, opcode: 0x%x",
+ __get_str(str), __get_str(dev_name), __entry->tag,
+ __entry->doorbell, __entry->transfer_len,
+ __entry->intr, __entry->lba, (u32)__entry->opcode
+ )
+);
+
#endif /* if !defined(_TRACE_UFS_H) || defined(TRACE_HEADER_MULTI_READ) */
/* This part must be outside protection */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists