[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOw6vbJA+_38GOyki-FLTLiEEDnOkK8bcM+cSzZQx=p31a3jXA@mail.gmail.com>
Date: Wed, 14 Dec 2016 05:00:09 -0500
From: Sean Paul <seanpaul@...omium.org>
To: Archit Taneja <architt@...eaurora.org>
Cc: Caesar Wang <wxt@...k-chips.com>, Dave Airlie <airlied@...ux.ie>,
Tomeu Vizoso <tomeu.vizoso@...labora.com>,
Gustavo Padovan <gustavo.padovan@...labora.co.uk>,
Daniel Vetter <daniel.vetter@...ll.ch>,
dri-devel <dri-devel@...ts.freedesktop.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-rockchip@...ts.infradead.org,
Brian Norris <briannorris@...omium.org>,
Heiko Stuebner <heiko@...ech.de>
Subject: Re: [PATCH] drm/bridge: analogix_dp: set the DPCD600 during disabling
the psr
On Wed, Dec 14, 2016 at 12:03 AM, Archit Taneja <architt@...eaurora.org> wrote:
> Hi,
>
> On 12/12/2016 08:28 PM, Sean Paul wrote:
>>
>> On Fri, Dec 9, 2016 at 9:49 PM, Caesar Wang <wxt@...k-chips.com> wrote:
>>>
>>> Look likes, the BOE panel FW didn't ack the DPCD600 signal from the host
>>> device, that will cause the panel hang on the startup display.
>>> The root cause we use the fast link mode during enter and exit the psr,
>>> this issue is gone if switching the fast link to main link mode.
>>>
>>
>> Cc: Archit Taneja <architt@...eaurora.org>
>
>
> Do we want this as a fix in 4.10? Or is it okay to get it in 4.11?
> In other words, should this go to drm-misc-next or drm-misc-fixes?
>
Hi Archit,
4.11 is totally fine.
Sean
> Thanks,
> Archit
>
>
>>
>>> Signed-off-by: Caesar Wang <wxt@...k-chips.com>
>>> ---
>>>
>>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 5 +++++
>>> 1 file changed, 5 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>>> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>>> index 6e0447f..6a5347b 100644
>>> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>>> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>>> @@ -133,6 +133,7 @@ int analogix_dp_disable_psr(struct device *dev)
>>> {
>>> struct analogix_dp_device *dp = dev_get_drvdata(dev);
>>> struct edp_vsc_psr psr_vsc;
>>> + int ret;
>>>
>>> if (!dp->psr_support)
>>> return -EINVAL;
>>> @@ -147,6 +148,10 @@ int analogix_dp_disable_psr(struct device *dev)
>>> psr_vsc.DB0 = 0;
>>> psr_vsc.DB1 = 0;
>>>
>>> + ret = drm_dp_dpcd_writeb(&dp->aux, DP_SET_POWER,
>>> DP_SET_POWER_D0);
>>> + if (ret != 1)
>>> + dev_err(dp->dev, "Failed to set DP Power0 %d\n", ret);
>>> +
>>> analogix_dp_send_psr_spd(dp, &psr_vsc);
>>> return 0;
>>> }
>>> --
>>> 2.7.4
>>>
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
Powered by blists - more mailing lists