| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20161214122451.GB27011@amd>
Date: Wed, 14 Dec 2016 13:24:51 +0100
From: Pavel Machek <pavel@....cz>
To: Sakari Ailus <sakari.ailus@....fi>
Cc: ivo.g.dimitrov.75@...il.com, sre@...nel.org, pali.rohar@...il.com,
linux-media@...r.kernel.org, galak@...eaurora.org,
mchehab@....samsung.com, linux-kernel@...r.kernel.org
Subject: [PATCH v5] media: Driver for Toshiba et8ek8 5MP sensor
Add driver for et8ek8 sensor, found in Nokia N900 main camera. Can be
used for taking photos in 2.5MP resolution with fcam-dev.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@...il.com>
Signed-off-by: Pavel Machek <pavel@....cz>
---
From v4 I did cleanups to coding style and removed various oddities.
Exposure value is now in native units, which simplifies the code.
The patch to add device tree bindings was already acked by device tree
people.
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 2669b4b..6d01e15 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -667,6 +667,7 @@ config VIDEO_S5K5BAF
camera sensor with an embedded SoC image signal processor.
source "drivers/media/i2c/smiapp/Kconfig"
+source "drivers/media/i2c/et8ek8/Kconfig"
config VIDEO_S5C73M3
tristate "Samsung S5C73M3 sensor support"
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 92773b2..5bc7bbe 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -2,6 +2,7 @@ msp3400-objs := msp3400-driver.o msp3400-kthreads.o
obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
obj-$(CONFIG_VIDEO_SMIAPP) += smiapp/
+obj-$(CONFIG_VIDEO_ET8EK8) += et8ek8/
obj-$(CONFIG_VIDEO_CX25840) += cx25840/
obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/
obj-y += soc_camera/
diff --git a/drivers/media/i2c/et8ek8/Kconfig b/drivers/media/i2c/et8ek8/Kconfig
new file mode 100644
index 0000000..1439936
--- /dev/null
+++ b/drivers/media/i2c/et8ek8/Kconfig
@@ -0,0 +1,6 @@
+config VIDEO_ET8EK8
+ tristate "ET8EK8 camera sensor support"
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ ---help---
+ This is a driver for the Toshiba ET8EK8 5 MP camera sensor.
+ It is used for example in Nokia N900 (RX-51).
diff --git a/drivers/media/i2c/et8ek8/Makefile b/drivers/media/i2c/et8ek8/Makefile
new file mode 100644
index 0000000..66d1b7d
--- /dev/null
+++ b/drivers/media/i2c/et8ek8/Makefile
@@ -0,0 +1,2 @@
+et8ek8-objs += et8ek8_mode.o et8ek8_driver.o
+obj-$(CONFIG_VIDEO_ET8EK8) += et8ek8.o
diff --git a/drivers/media/i2c/et8ek8/et8ek8_driver.c b/drivers/media/i2c/et8ek8/et8ek8_driver.c
new file mode 100644
index 0000000..4a638f8
--- /dev/null
+++ b/drivers/media/i2c/et8ek8/et8ek8_driver.c
@@ -0,0 +1,1515 @@
+/*
+ * et8ek8_driver.c
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Sakari Ailus <sakari.ailus@....fi>
+ * Tuukka Toivonen <tuukkat76@...il.com>
+ * Pavel Machek <pavel@....cz>
+ *
+ * Based on code from Toni Leinonen <toni.leinonen@...code.fi>.
+ *
+ * This driver is based on the Micron MT9T012 camera imager driver
+ * (C) Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/v4l2-mediabus.h>
+
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#include "et8ek8_reg.h"
+
+#define ET8EK8_NAME "et8ek8"
+#define ET8EK8_PRIV_MEM_SIZE 128
+#define ET8EK8_MAX_MSG 48
+
+struct et8ek8_sensor {
+ struct v4l2_subdev subdev;
+ struct media_pad pad;
+ struct v4l2_mbus_framefmt format;
+ struct gpio_desc *reset;
+ struct regulator *vana;
+ struct clk *ext_clk;
+ u32 xclk_freq;
+
+ u16 version;
+
+ struct v4l2_ctrl_handler ctrl_handler;
+ struct v4l2_ctrl *exposure;
+ struct v4l2_ctrl *pixel_rate;
+ struct et8ek8_reglist *current_reglist;
+
+ u8 priv_mem[ET8EK8_PRIV_MEM_SIZE];
+
+ struct mutex power_lock;
+ int power_count;
+};
+
+#define to_et8ek8_sensor(sd) container_of(sd, struct et8ek8_sensor, subdev)
+
+enum et8ek8_versions {
+ ET8EK8_REV_1 = 0x0001,
+ ET8EK8_REV_2,
+};
+
+/*
+ * This table describes what should be written to the sensor register
+ * for each gain value. The gain(index in the table) is in terms of
+ * 0.1EV, i.e. 10 indexes in the table give 2 time more gain [0] in
+ * the *analog gain, [1] in the digital gain
+ *
+ * Analog gain [dB] = 20*log10(regvalue/32); 0x20..0x100
+ */
+static struct et8ek8_gain {
+ u16 analog;
+ u16 digital;
+} const et8ek8_gain_table[] = {
+ { 32, 0}, /* x1 */
+ { 34, 0},
+ { 37, 0},
+ { 39, 0},
+ { 42, 0},
+ { 45, 0},
+ { 49, 0},
+ { 52, 0},
+ { 56, 0},
+ { 60, 0},
+ { 64, 0}, /* x2 */
+ { 69, 0},
+ { 74, 0},
+ { 79, 0},
+ { 84, 0},
+ { 91, 0},
+ { 97, 0},
+ {104, 0},
+ {111, 0},
+ {119, 0},
+ {128, 0}, /* x4 */
+ {137, 0},
+ {147, 0},
+ {158, 0},
+ {169, 0},
+ {181, 0},
+ {194, 0},
+ {208, 0},
+ {223, 0},
+ {239, 0},
+ {256, 0}, /* x8 */
+ {256, 73},
+ {256, 152},
+ {256, 236},
+ {256, 327},
+ {256, 424},
+ {256, 528},
+ {256, 639},
+ {256, 758},
+ {256, 886},
+ {256, 1023}, /* x16 */
+};
+
+/* Register definitions */
+#define REG_REVISION_NUMBER_L 0x1200
+#define REG_REVISION_NUMBER_H 0x1201
+
+#define PRIV_MEM_START_REG 0x0008
+#define PRIV_MEM_WIN_SIZE 8
+
+#define ET8EK8_I2C_DELAY 3 /* msec delay b/w accesses */
+
+#define USE_CRC 1
+
+/*
+ * Register access helpers
+ *
+ * Read a 8/16/32-bit i2c register. The value is returned in 'val'.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+static int et8ek8_i2c_read_reg(struct i2c_client *client, u16 data_length,
+ u16 reg, u32 *val)
+{
+ int r;
+ struct i2c_msg msg;
+ unsigned char data[4];
+
+ if (!client->adapter)
+ return -ENODEV;
+ if (data_length != ET8EK8_REG_8BIT && data_length != ET8EK8_REG_16BIT)
+ return -EINVAL;
+
+ msg.addr = client->addr;
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = data;
+
+ /* high byte goes out first */
+ data[0] = (u8) (reg >> 8);
+ data[1] = (u8) (reg & 0xff);
+ r = i2c_transfer(client->adapter, &msg, 1);
+ if (r < 0)
+ goto err;
+
+ msg.len = data_length;
+ msg.flags = I2C_M_RD;
+ r = i2c_transfer(client->adapter, &msg, 1);
+ if (r < 0)
+ goto err;
+
+ *val = 0;
+ /* high byte comes first */
+ if (data_length == ET8EK8_REG_8BIT)
+ *val = data[0];
+ else
+ *val = (data[0] << 8) + data[1];
+
+ return 0;
+
+err:
+ dev_err(&client->dev, "read from offset 0x%x error %d\n", reg, r);
+
+ return r;
+}
+
+static void et8ek8_i2c_create_msg(struct i2c_client *client, u16 len, u16 reg,
+ u32 val, struct i2c_msg *msg,
+ unsigned char *buf)
+{
+ msg->addr = client->addr;
+ msg->flags = 0; /* Write */
+ msg->len = 2 + len;
+ msg->buf = buf;
+
+ /* high byte goes out first */
+ buf[0] = (u8) (reg >> 8);
+ buf[1] = (u8) (reg & 0xff);
+
+ switch (len) {
+ case ET8EK8_REG_8BIT:
+ buf[2] = (u8) (val) & 0xff;
+ break;
+ case ET8EK8_REG_16BIT:
+ buf[2] = (u8) (val >> 8) & 0xff;
+ buf[3] = (u8) (val & 0xff);
+ break;
+ default:
+ WARN_ONCE(1, ET8EK8_NAME ": %s: invalid message length.\n",
+ __func__);
+ }
+}
+
+/*
+ * A buffered write method that puts the wanted register write
+ * commands in a message list and passes the list to the i2c framework
+ */
+static int et8ek8_i2c_buffered_write_regs(struct i2c_client *client,
+ const struct et8ek8_reg *wnext,
+ int cnt)
+{
+ struct i2c_msg msg[ET8EK8_MAX_MSG];
+ unsigned char data[ET8EK8_MAX_MSG][6];
+ int wcnt = 0;
+ u16 reg, data_length;
+ u32 val;
+
+ if (WARN_ONCE(cnt > ET8EK8_MAX_MSG,
+ ET8EK8_NAME ": %s: too many messages.\n", __func__)) {
+ return -EINVAL;
+ }
+
+ /* Create new write messages for all writes */
+ while (wcnt < cnt) {
+ data_length = wnext->type;
+ reg = wnext->reg;
+ val = wnext->val;
+ wnext++;
+
+ et8ek8_i2c_create_msg(client, data_length, reg,
+ val, &msg[wcnt], &data[wcnt][0]);
+
+ /* Update write count */
+ wcnt++;
+ }
+
+ /* Now we send everything ... */
+ return i2c_transfer(client->adapter, msg, wcnt);
+}
+
+/*
+ * Write a list of registers to i2c device.
+ *
+ * The list of registers is terminated by ET8EK8_REG_TERM.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+static int et8ek8_i2c_write_regs(struct i2c_client *client,
+ const struct et8ek8_reg *regs)
+{
+ int r, cnt = 0;
+ const struct et8ek8_reg *next;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ if (!regs)
+ return -EINVAL;
+
+ /* Initialize list pointers to the start of the list */
+ next = regs;
+
+ do {
+ /*
+ * We have to go through the list to figure out how
+ * many regular writes we have in a row
+ */
+ while (next->type != ET8EK8_REG_TERM &&
+ next->type != ET8EK8_REG_DELAY) {
+ /*
+ * Here we check that the actual length fields
+ * are valid
+ */
+ if (WARN(next->type != ET8EK8_REG_8BIT &&
+ next->type != ET8EK8_REG_16BIT,
+ "Invalid type = %d", next->type)) {
+ return -EINVAL;
+ }
+ /*
+ * Increment count of successive writes and
+ * read pointer
+ */
+ cnt++;
+ next++;
+ }
+
+ /* Now we start writing ... */
+ r = et8ek8_i2c_buffered_write_regs(client, regs, cnt);
+
+ /* ... and then check that everything was OK */
+ if (r < 0) {
+ dev_err(&client->dev, "i2c transfer error!\n");
+ return r;
+ }
+
+ /*
+ * If we ran into a sleep statement when going through
+ * the list, this is where we snooze for the required time
+ */
+ if (next->type == ET8EK8_REG_DELAY) {
+ msleep(next->val);
+ /*
+ * ZZZ ...
+ * Update list pointers and cnt and start over ...
+ */
+ next++;
+ regs = next;
+ cnt = 0;
+ }
+ } while (next->type != ET8EK8_REG_TERM);
+
+ return 0;
+}
+
+/*
+ * Write to a 8/16-bit register.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+static int et8ek8_i2c_write_reg(struct i2c_client *client, u16 data_length,
+ u16 reg, u32 val)
+{
+ int r;
+ struct i2c_msg msg;
+ unsigned char data[6];
+
+ if (!client->adapter)
+ return -ENODEV;
+ if (data_length != ET8EK8_REG_8BIT && data_length != ET8EK8_REG_16BIT)
+ return -EINVAL;
+
+ et8ek8_i2c_create_msg(client, data_length, reg, val, &msg, data);
+
+ r = i2c_transfer(client->adapter, &msg, 1);
+ if (r < 0)
+ dev_err(&client->dev,
+ "wrote 0x%x to offset 0x%x error %d\n", val, reg, r);
+ else
+ r = 0; /* on success i2c_transfer() returns messages trasfered */
+
+ return r;
+}
+
+static struct et8ek8_reglist *et8ek8_reglist_find_type(
+ struct et8ek8_meta_reglist *meta,
+ u16 type)
+{
+ struct et8ek8_reglist **next = &meta->reglist[0].ptr;
+
+ while (*next) {
+ if ((*next)->type == type)
+ return *next;
+
+ next++;
+ }
+
+ return NULL;
+}
+
+static int et8ek8_i2c_reglist_find_write(struct i2c_client *client,
+ struct et8ek8_meta_reglist *meta,
+ u16 type)
+{
+ struct et8ek8_reglist *reglist;
+
+ reglist = et8ek8_reglist_find_type(meta, type);
+ if (!reglist)
+ return -EINVAL;
+
+ return et8ek8_i2c_write_regs(client, reglist->regs);
+}
+
+static struct et8ek8_reglist **et8ek8_reglist_first(
+ struct et8ek8_meta_reglist *meta)
+{
+ return &meta->reglist[0].ptr;
+}
+
+static void et8ek8_reglist_to_mbus(const struct et8ek8_reglist *reglist,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ fmt->width = reglist->mode.window_width;
+ fmt->height = reglist->mode.window_height;
+ fmt->code = reglist->mode.bus_format;
+}
+
+static struct et8ek8_reglist *et8ek8_reglist_find_mode_fmt(
+ struct et8ek8_meta_reglist *meta,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ struct et8ek8_reglist **list = et8ek8_reglist_first(meta);
+ struct et8ek8_reglist *best_match = NULL;
+ struct et8ek8_reglist *best_other = NULL;
+ struct v4l2_mbus_framefmt format;
+ unsigned int max_dist_match = (unsigned int)-1;
+ unsigned int max_dist_other = (unsigned int)-1;
+
+ /*
+ * Find the mode with the closest image size. The distance between
+ * image sizes is the size in pixels of the non-overlapping regions
+ * between the requested size and the frame-specified size.
+ *
+ * Store both the closest mode that matches the requested format, and
+ * the closest mode for all other formats. The best match is returned
+ * if found, otherwise the best mode with a non-matching format is
+ * returned.
+ */
+ for (; *list; list++) {
+ unsigned int dist;
+
+ if ((*list)->type != ET8EK8_REGLIST_MODE)
+ continue;
+
+ et8ek8_reglist_to_mbus(*list, &format);
+
+ dist = min(fmt->width, format.width)
+ * min(fmt->height, format.height);
+ dist = format.width * format.height
+ + fmt->width * fmt->height - 2 * dist;
+
+
+ if (fmt->code == format.code) {
+ if (dist < max_dist_match || !best_match) {
+ best_match = *list;
+ max_dist_match = dist;
+ }
+ } else {
+ if (dist < max_dist_other || !best_other) {
+ best_other = *list;
+ max_dist_other = dist;
+ }
+ }
+ }
+
+ return best_match ? best_match : best_other;
+}
+
+#define TIMEPERFRAME_AVG_FPS(t) \
+ (((t).denominator + ((t).numerator >> 1)) / (t).numerator)
+
+static struct et8ek8_reglist *et8ek8_reglist_find_mode_ival(
+ struct et8ek8_meta_reglist *meta,
+ struct et8ek8_reglist *current_reglist,
+ struct v4l2_fract *timeperframe)
+{
+ int fps = TIMEPERFRAME_AVG_FPS(*timeperframe);
+ struct et8ek8_reglist **list = et8ek8_reglist_first(meta);
+ struct et8ek8_mode *current_mode = ¤t_reglist->mode;
+
+ for (; *list; list++) {
+ struct et8ek8_mode *mode = &(*list)->mode;
+
+ if ((*list)->type != ET8EK8_REGLIST_MODE)
+ continue;
+
+ if (mode->window_width != current_mode->window_width ||
+ mode->window_height != current_mode->window_height)
+ continue;
+
+ if (TIMEPERFRAME_AVG_FPS(mode->timeperframe) == fps)
+ return *list;
+ }
+
+ return NULL;
+}
+
+static int et8ek8_reglist_cmp(const void *a, const void *b)
+{
+ const struct et8ek8_reglist **list1 = (const struct et8ek8_reglist **)a,
+ **list2 = (const struct et8ek8_reglist **)b;
+
+ /* Put real modes in the beginning. */
+ if ((*list1)->type == ET8EK8_REGLIST_MODE &&
+ (*list2)->type != ET8EK8_REGLIST_MODE)
+ return -1;
+ if ((*list1)->type != ET8EK8_REGLIST_MODE &&
+ (*list2)->type == ET8EK8_REGLIST_MODE)
+ return 1;
+
+ /* Descending width. */
+ if ((*list1)->mode.window_width > (*list2)->mode.window_width)
+ return -1;
+ if ((*list1)->mode.window_width < (*list2)->mode.window_width)
+ return 1;
+
+ if ((*list1)->mode.window_height > (*list2)->mode.window_height)
+ return -1;
+ if ((*list1)->mode.window_height < (*list2)->mode.window_height)
+ return 1;
+
+ return 0;
+}
+
+static int et8ek8_reglist_import(struct i2c_client *client,
+ struct et8ek8_meta_reglist *meta)
+{
+ int nlists = 0, i;
+
+ dev_info(&client->dev, "meta_reglist version %s\n", meta->version);
+
+ while (meta->reglist[nlists].ptr)
+ nlists++;
+
+ if (!nlists)
+ return -EINVAL;
+
+ sort(&meta->reglist[0].ptr, nlists, sizeof(meta->reglist[0].ptr),
+ et8ek8_reglist_cmp, NULL);
+
+ i = nlists;
+ nlists = 0;
+
+ while (i--) {
+ struct et8ek8_reglist *list;
+
+ list = meta->reglist[nlists].ptr;
+
+ dev_dbg(&client->dev,
+ "%s: type %d\tw %d\th %d\tfmt %x\tival %d/%d\tptr %p\n",
+ __func__,
+ list->type,
+ list->mode.window_width, list->mode.window_height,
+ list->mode.bus_format,
+ list->mode.timeperframe.numerator,
+ list->mode.timeperframe.denominator,
+ (void *)meta->reglist[nlists].ptr);
+
+ nlists++;
+ }
+
+ return 0;
+}
+
+/* Called to change the V4L2 gain control value. This function
+ * rounds and clamps the given value and updates the V4L2 control value.
+ * If power is on, also updates the sensor analog and digital gains.
+ * gain is in 0.1 EV (exposure value) units.
+ */
+static int et8ek8_set_gain(struct et8ek8_sensor *sensor, s32 gain)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
+ struct et8ek8_gain new;
+ int r;
+
+ new = et8ek8_gain_table[gain];
+
+ /* FIXME: optimise I2C writes! */
+ r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT,
+ 0x124a, new.analog >> 8);
+ if (r)
+ return r;
+ r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT,
+ 0x1249, new.analog & 0xff);
+ if (r)
+ return r;
+
+ r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT,
+ 0x124d, new.digital >> 8);
+ if (r)
+ return r;
+ r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT,
+ 0x124c, new.digital & 0xff);
+
+ return r;
+}
+
+static int et8ek8_set_test_pattern(struct et8ek8_sensor *sensor, s32 mode)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
+ int cbh_mode, cbv_mode, tp_mode, din_sw, r1420, rval;
+
+ /* Values for normal mode */
+ cbh_mode = 0;
+ cbv_mode = 0;
+ tp_mode = 0;
+ din_sw = 0x00;
+ r1420 = 0xF0;
+
+ if (mode) {
+ /* Test pattern mode */
+ if (mode < 5) {
+ cbh_mode = 1;
+ cbv_mode = 1;
+ tp_mode = mode + 3;
+ } else {
+ cbh_mode = 0;
+ cbv_mode = 0;
+ tp_mode = mode - 4 + 3;
+ }
+
+ din_sw = 0x01;
+ r1420 = 0xE0;
+ }
+
+ rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x111B,
+ tp_mode << 4);
+ if (rval)
+ return rval;
+
+ rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1121,
+ cbh_mode << 7);
+ if (rval)
+ return rval;
+
+ rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1124,
+ cbv_mode << 7);
+ if (rval)
+ return rval;
+
+ rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x112C, din_sw);
+ if (rval)
+ return rval;
+
+ rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1420, r1420);
+ return rval;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 controls
+ */
+
+static int et8ek8_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct et8ek8_sensor *sensor =
+ container_of(ctrl->handler, struct et8ek8_sensor, ctrl_handler);
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ return et8ek8_set_gain(sensor, ctrl->val);
+
+ case V4L2_CID_EXPOSURE:
+ {
+ int rows;
+ struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
+ rows = ctrl->val;
+ return et8ek8_i2c_write_reg(client, ET8EK8_REG_16BIT, 0x1243,
+ swab16(rows));
+ }
+
+ case V4L2_CID_TEST_PATTERN:
+ return et8ek8_set_test_pattern(sensor, ctrl->val);
+
+ case V4L2_CID_PIXEL_RATE:
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct v4l2_ctrl_ops et8ek8_ctrl_ops = {
+ .s_ctrl = et8ek8_set_ctrl,
+};
+
+static const char * const et8ek8_test_pattern_menu[] = {
+ "Normal",
+ "Vertical colorbar",
+ "Horizontal colorbar",
+ "Scale",
+ "Ramp",
+ "Small vertical colorbar",
+ "Small horizontal colorbar",
+ "Small scale",
+ "Small ramp",
+};
+
+static int et8ek8_init_controls(struct et8ek8_sensor *sensor)
+{
+ s32 max_rows;
+
+ v4l2_ctrl_handler_init(&sensor->ctrl_handler, 4);
+
+ /* V4L2_CID_GAIN */
+ v4l2_ctrl_new_std(&sensor->ctrl_handler, &et8ek8_ctrl_ops,
+ V4L2_CID_GAIN, 0, ARRAY_SIZE(et8ek8_gain_table) - 1,
+ 1, 0);
+
+ max_rows = sensor->current_reglist->mode.max_exp;
+ {
+ u32 min = 1, max = max_rows;
+
+ sensor->exposure =
+ v4l2_ctrl_new_std(&sensor->ctrl_handler, &et8ek8_ctrl_ops,
+ V4L2_CID_EXPOSURE, min, max, min, max);
+ }
+
+ /* V4L2_CID_PIXEL_RATE */
+ sensor->pixel_rate =
+ v4l2_ctrl_new_std(&sensor->ctrl_handler, &et8ek8_ctrl_ops,
+ V4L2_CID_PIXEL_RATE, 1, INT_MAX, 1, 1);
+
+ /* V4L2_CID_TEST_PATTERN */
+ v4l2_ctrl_new_std_menu_items(&sensor->ctrl_handler,
+ &et8ek8_ctrl_ops, V4L2_CID_TEST_PATTERN,
+ ARRAY_SIZE(et8ek8_test_pattern_menu) - 1,
+ 0, 0, et8ek8_test_pattern_menu);
+
+ if (sensor->ctrl_handler.error)
+ return sensor->ctrl_handler.error;
+
+ sensor->subdev.ctrl_handler = &sensor->ctrl_handler;
+
+ return 0;
+}
+
+static void et8ek8_update_controls(struct et8ek8_sensor *sensor)
+{
+ struct v4l2_ctrl *ctrl;
+ struct et8ek8_mode *mode = &sensor->current_reglist->mode;
+
+ u32 min, max, pixel_rate;
+ static const int S = 8;
+
+ ctrl = sensor->exposure;
+
+ min = 1;
+ max = mode->max_exp;
+
+ /*
+ * Calculate average pixel clock per line. Assume buffers can spread
+ * the data over horizontal blanking time. Rounding upwards.
+ * Formula taken from stock Nokia N900 kernel.
+ */
+ pixel_rate = ((mode->pixel_clock + (1 << S) - 1) >> S) + mode->width;
+ pixel_rate = mode->window_width * (pixel_rate - 1) / mode->width;
+
+ __v4l2_ctrl_modify_range(ctrl, min, max, min, max);
+ __v4l2_ctrl_s_ctrl_int64(sensor->pixel_rate, pixel_rate << S);
+}
+
+static int et8ek8_configure(struct et8ek8_sensor *sensor)
+{
+ struct v4l2_subdev *subdev = &sensor->subdev;
+ struct i2c_client *client = v4l2_get_subdevdata(subdev);
+ int rval;
+
+ rval = et8ek8_i2c_write_regs(client, sensor->current_reglist->regs);
+ if (rval)
+ goto fail;
+
+ /* Controls set while the power to the sensor is turned off are saved
+ * but not applied to the hardware. Now that we're about to start
+ * streaming apply all the current values to the hardware.
+ */
+ rval = v4l2_ctrl_handler_setup(&sensor->ctrl_handler);
+ if (rval)
+ goto fail;
+
+ return 0;
+
+fail:
+ dev_err(&client->dev, "sensor configuration failed\n");
+
+ return rval;
+}
+
+static int et8ek8_stream_on(struct et8ek8_sensor *sensor)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
+
+ return et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1252, 0xb0);
+}
+
+static int et8ek8_stream_off(struct et8ek8_sensor *sensor)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
+
+ return et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1252, 0x30);
+}
+
+static int et8ek8_s_stream(struct v4l2_subdev *subdev, int streaming)
+{
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+ int ret;
+
+ if (!streaming)
+ return et8ek8_stream_off(sensor);
+
+ ret = et8ek8_configure(sensor);
+ if (ret < 0)
+ return ret;
+
+ return et8ek8_stream_on(sensor);
+}
+
+/* --------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static int et8ek8_power_off(struct et8ek8_sensor *sensor)
+{
+ gpiod_set_value(sensor->reset, 0);
+ udelay(1);
+
+ clk_disable_unprepare(sensor->ext_clk);
+
+ return regulator_disable(sensor->vana);
+}
+
+static int et8ek8_power_on(struct et8ek8_sensor *sensor)
+{
+ struct v4l2_subdev *subdev = &sensor->subdev;
+ struct i2c_client *client = v4l2_get_subdevdata(subdev);
+ unsigned int xclk_freq;
+ int val, rval;
+
+ rval = regulator_enable(sensor->vana);
+ if (rval) {
+ dev_err(&client->dev, "failed to enable vana regulator\n");
+ return rval;
+ }
+
+ if (sensor->current_reglist)
+ xclk_freq = sensor->current_reglist->mode.ext_clock;
+ else
+ xclk_freq = sensor->xclk_freq;
+
+ rval = clk_set_rate(sensor->ext_clk, xclk_freq);
+ if (rval < 0) {
+ dev_err(&client->dev, "unable to set extclk clock freq to %u\n",
+ xclk_freq);
+ goto out;
+ }
+ rval = clk_prepare_enable(sensor->ext_clk);
+ if (rval < 0) {
+ dev_err(&client->dev, "failed to enable extclk\n");
+ goto out;
+ }
+
+ if (rval)
+ goto out;
+
+ udelay(10); /* I wish this is a good value */
+
+ gpiod_set_value(sensor->reset, 1);
+
+ msleep(5000 * 1000 / xclk_freq + 1); /* Wait 5000 cycles */
+
+ rval = et8ek8_i2c_reglist_find_write(client, &meta_reglist,
+ ET8EK8_REGLIST_POWERON);
+ if (rval)
+ goto out;
+
+#ifdef USE_CRC
+ rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT, 0x1263, &val);
+ if (rval)
+ goto out;
+#if USE_CRC /* TODO get crc setting from DT */
+ val |= BIT(4);
+#else
+ val &= ~BIT(4);
+#endif
+ rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1263, val);
+ if (rval)
+ goto out;
+#endif
+
+out:
+ if (rval)
+ et8ek8_power_off(sensor);
+
+ return rval;
+}
+
+/* --------------------------------------------------------------------------
+ * V4L2 subdev video operations
+ */
+#define MAX_FMTS 4
+static int et8ek8_enum_mbus_code(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct et8ek8_reglist **list =
+ et8ek8_reglist_first(&meta_reglist);
+ u32 pixelformat[MAX_FMTS];
+ int npixelformat = 0;
+
+ if (code->index >= MAX_FMTS)
+ return -EINVAL;
+
+ for (; *list; list++) {
+ struct et8ek8_mode *mode = &(*list)->mode;
+ int i;
+
+ if ((*list)->type != ET8EK8_REGLIST_MODE)
+ continue;
+
+ for (i = 0; i < npixelformat; i++) {
+ if (pixelformat[i] == mode->bus_format)
+ break;
+ }
+ if (i != npixelformat)
+ continue;
+
+ if (code->index == npixelformat) {
+ code->code = mode->bus_format;
+ return 0;
+ }
+
+ pixelformat[npixelformat] = mode->bus_format;
+ npixelformat++;
+ }
+
+ return -EINVAL;
+}
+
+static int et8ek8_enum_frame_size(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct et8ek8_reglist **list =
+ et8ek8_reglist_first(&meta_reglist);
+ struct v4l2_mbus_framefmt format;
+ int cmp_width = INT_MAX;
+ int cmp_height = INT_MAX;
+ int index = fse->index;
+
+ for (; *list; list++) {
+ if ((*list)->type != ET8EK8_REGLIST_MODE)
+ continue;
+
+ et8ek8_reglist_to_mbus(*list, &format);
+ if (fse->code != format.code)
+ continue;
+
+ /* Assume that the modes are grouped by frame size. */
+ if (format.width == cmp_width && format.height == cmp_height)
+ continue;
+
+ cmp_width = format.width;
+ cmp_height = format.height;
+
+ if (index-- == 0) {
+ fse->min_width = format.width;
+ fse->min_height = format.height;
+ fse->max_width = format.width;
+ fse->max_height = format.height;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int et8ek8_enum_frame_ival(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ struct et8ek8_reglist **list =
+ et8ek8_reglist_first(&meta_reglist);
+ struct v4l2_mbus_framefmt format;
+ int index = fie->index;
+
+ for (; *list; list++) {
+ struct et8ek8_mode *mode = &(*list)->mode;
+
+ if ((*list)->type != ET8EK8_REGLIST_MODE)
+ continue;
+
+ et8ek8_reglist_to_mbus(*list, &format);
+ if (fie->code != format.code)
+ continue;
+
+ if (fie->width != format.width || fie->height != format.height)
+ continue;
+
+ if (index-- == 0) {
+ fie->interval = mode->timeperframe;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static struct v4l2_mbus_framefmt *
+__et8ek8_get_pad_format(struct et8ek8_sensor *sensor,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_format(&sensor->subdev, cfg, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &sensor->format;
+ default:
+ return NULL;
+ }
+}
+
+static int et8ek8_get_pad_format(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __et8ek8_get_pad_format(sensor, cfg, fmt->pad, fmt->which);
+ if (!format)
+ return -EINVAL;
+
+ fmt->format = *format;
+
+ return 0;
+}
+
+static int et8ek8_set_pad_format(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+ struct v4l2_mbus_framefmt *format;
+ struct et8ek8_reglist *reglist;
+
+ format = __et8ek8_get_pad_format(sensor, cfg, fmt->pad, fmt->which);
+ if (!format)
+ return -EINVAL;
+
+ reglist = et8ek8_reglist_find_mode_fmt(&meta_reglist, &fmt->format);
+ et8ek8_reglist_to_mbus(reglist, &fmt->format);
+ *format = fmt->format;
+
+ if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+ sensor->current_reglist = reglist;
+ et8ek8_update_controls(sensor);
+ }
+
+ return 0;
+}
+
+static int et8ek8_get_frame_interval(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_frame_interval *fi)
+{
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+
+ memset(fi, 0, sizeof(*fi));
+ fi->interval = sensor->current_reglist->mode.timeperframe;
+
+ return 0;
+}
+
+static int et8ek8_set_frame_interval(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_frame_interval *fi)
+{
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+ struct et8ek8_reglist *reglist;
+
+ reglist = et8ek8_reglist_find_mode_ival(&meta_reglist,
+ sensor->current_reglist,
+ &fi->interval);
+
+ if (!reglist)
+ return -EINVAL;
+
+ if (sensor->current_reglist->mode.ext_clock != reglist->mode.ext_clock)
+ return -EINVAL;
+
+ sensor->current_reglist = reglist;
+ et8ek8_update_controls(sensor);
+
+ return 0;
+}
+
+static int et8ek8_g_priv_mem(struct v4l2_subdev *subdev)
+{
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+ struct i2c_client *client = v4l2_get_subdevdata(subdev);
+ unsigned int length = ET8EK8_PRIV_MEM_SIZE;
+ unsigned int offset = 0;
+ u8 *ptr = sensor->priv_mem;
+ int rval = 0;
+
+ /* Read the EEPROM window-by-window, each window 8 bytes */
+ do {
+ u8 buffer[PRIV_MEM_WIN_SIZE];
+ struct i2c_msg msg;
+ int bytes, i;
+ int ofs;
+
+ /* Set the current window */
+ rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x0001,
+ 0xe0 | (offset >> 3));
+ if (rval < 0)
+ return rval;
+
+ /* Wait for status bit */
+ for (i = 0; i < 1000; ++i) {
+ u32 status;
+
+ rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT,
+ 0x0003, &status);
+ if (rval < 0)
+ return rval;
+ if (!(status & 0x08))
+ break;
+ usleep_range(1000, 2000);
+ };
+
+ if (i == 1000)
+ return -EIO;
+
+ /* Read window, 8 bytes at once, and copy to user space */
+ ofs = offset & 0x07; /* Offset within this window */
+ bytes = length + ofs > 8 ? 8-ofs : length;
+ msg.addr = client->addr;
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = buffer;
+ ofs += PRIV_MEM_START_REG;
+ buffer[0] = (u8)(ofs >> 8);
+ buffer[1] = (u8)(ofs & 0xFF);
+
+ rval = i2c_transfer(client->adapter, &msg, 1);
+ if (rval < 0)
+ return rval;
+
+ mdelay(ET8EK8_I2C_DELAY);
+ msg.addr = client->addr;
+ msg.len = bytes;
+ msg.flags = I2C_M_RD;
+ msg.buf = buffer;
+ memset(buffer, 0, sizeof(buffer));
+
+ rval = i2c_transfer(client->adapter, &msg, 1);
+ if (rval < 0)
+ return rval;
+
+ rval = 0;
+ memcpy(ptr, buffer, bytes);
+
+ length -= bytes;
+ offset += bytes;
+ ptr += bytes;
+ } while (length > 0);
+
+ return rval;
+}
+
+static int et8ek8_dev_init(struct v4l2_subdev *subdev)
+{
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+ struct i2c_client *client = v4l2_get_subdevdata(subdev);
+ int rval, rev_l, rev_h;
+
+ rval = et8ek8_power_on(sensor);
+ if (rval) {
+ dev_err(&client->dev, "could not power on\n");
+ return rval;
+ }
+
+ rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT,
+ REG_REVISION_NUMBER_L, &rev_l);
+ if (!rval)
+ rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT,
+ REG_REVISION_NUMBER_H, &rev_h);
+ if (rval) {
+ dev_err(&client->dev, "no et8ek8 sensor detected\n");
+ goto out_poweroff;
+ }
+
+ sensor->version = (rev_h << 8) + rev_l;
+ if (sensor->version != ET8EK8_REV_1 && sensor->version != ET8EK8_REV_2)
+ dev_info(&client->dev,
+ "unknown version 0x%x detected, continuing anyway\n",
+ sensor->version);
+
+ rval = et8ek8_reglist_import(client, &meta_reglist);
+ if (rval) {
+ dev_err(&client->dev,
+ "invalid register list %s, import failed\n",
+ ET8EK8_NAME);
+ goto out_poweroff;
+ }
+
+ sensor->current_reglist = et8ek8_reglist_find_type(&meta_reglist,
+ ET8EK8_REGLIST_MODE);
+ if (!sensor->current_reglist) {
+ dev_err(&client->dev,
+ "invalid register list %s, no mode found\n",
+ ET8EK8_NAME);
+ rval = -ENODEV;
+ goto out_poweroff;
+ }
+
+ et8ek8_reglist_to_mbus(sensor->current_reglist, &sensor->format);
+
+ rval = et8ek8_i2c_reglist_find_write(client, &meta_reglist,
+ ET8EK8_REGLIST_POWERON);
+ if (rval) {
+ dev_err(&client->dev,
+ "invalid register list %s, no POWERON mode found\n",
+ ET8EK8_NAME);
+ goto out_poweroff;
+ }
+ rval = et8ek8_stream_on(sensor); /* Needed to be able to read EEPROM */
+ if (rval)
+ goto out_poweroff;
+ rval = et8ek8_g_priv_mem(subdev);
+ if (rval)
+ dev_warn(&client->dev,
+ "can not read OTP (EEPROM) memory from sensor\n");
+ rval = et8ek8_stream_off(sensor);
+ if (rval)
+ goto out_poweroff;
+
+ rval = et8ek8_power_off(sensor);
+ if (rval)
+ goto out_poweroff;
+
+ return 0;
+
+out_poweroff:
+ et8ek8_power_off(sensor);
+
+ return rval;
+}
+
+/* --------------------------------------------------------------------------
+ * sysfs attributes
+ */
+static ssize_t
+et8ek8_priv_mem_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev));
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+
+#if PAGE_SIZE < ET8EK8_PRIV_MEM_SIZE
+#error PAGE_SIZE too small!
+#endif
+
+ memcpy(buf, sensor->priv_mem, ET8EK8_PRIV_MEM_SIZE);
+
+ return ET8EK8_PRIV_MEM_SIZE;
+}
+static DEVICE_ATTR(priv_mem, S_IRUGO, et8ek8_priv_mem_read, NULL);
+
+/* --------------------------------------------------------------------------
+ * V4L2 subdev core operations
+ */
+
+static int
+et8ek8_registered(struct v4l2_subdev *subdev)
+{
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+ struct i2c_client *client = v4l2_get_subdevdata(subdev);
+ struct v4l2_mbus_framefmt *format;
+ int rval;
+
+ dev_dbg(&client->dev, "registered!");
+
+ rval = device_create_file(&client->dev, &dev_attr_priv_mem);
+ if (rval) {
+ dev_err(&client->dev, "could not register sysfs entry\n");
+ return rval;
+ }
+
+ rval = et8ek8_dev_init(subdev);
+ if (rval)
+ goto err_file;
+
+ rval = et8ek8_init_controls(sensor);
+ if (rval) {
+ dev_err(&client->dev, "controls initialization failed\n");
+ goto err_file;
+ }
+
+ format = __et8ek8_get_pad_format(sensor, NULL, 0,
+ V4L2_SUBDEV_FORMAT_ACTIVE);
+ return 0;
+
+err_file:
+ device_remove_file(&client->dev, &dev_attr_priv_mem);
+
+ return rval;
+}
+
+static int __et8ek8_set_power(struct et8ek8_sensor *sensor, bool on)
+{
+ return on ? et8ek8_power_on(sensor) : et8ek8_power_off(sensor);
+}
+
+static int et8ek8_set_power(struct v4l2_subdev *subdev, int on)
+{
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+ int ret = 0;
+
+ mutex_lock(&sensor->power_lock);
+
+ /* If the power count is modified from 0 to != 0 or from != 0 to 0,
+ * update the power state.
+ */
+ if (sensor->power_count == !on) {
+ ret = __et8ek8_set_power(sensor, !!on);
+ if (ret < 0)
+ goto done;
+ }
+
+ /* Update the power count. */
+ sensor->power_count += on ? 1 : -1;
+ WARN_ON(sensor->power_count < 0);
+
+done:
+ mutex_unlock(&sensor->power_lock);
+
+ return ret;
+}
+
+static int et8ek8_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(sd);
+ struct v4l2_mbus_framefmt *format;
+ struct et8ek8_reglist *reglist;
+
+ reglist = et8ek8_reglist_find_type(&meta_reglist, ET8EK8_REGLIST_MODE);
+ format = __et8ek8_get_pad_format(sensor, fh->pad, 0,
+ V4L2_SUBDEV_FORMAT_TRY);
+ et8ek8_reglist_to_mbus(reglist, format);
+
+ return et8ek8_set_power(sd, true);
+}
+
+static int et8ek8_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ return et8ek8_set_power(sd, false);
+}
+
+static const struct v4l2_subdev_video_ops et8ek8_video_ops = {
+ .s_stream = et8ek8_s_stream,
+ .g_frame_interval = et8ek8_get_frame_interval,
+ .s_frame_interval = et8ek8_set_frame_interval,
+};
+
+static const struct v4l2_subdev_core_ops et8ek8_core_ops = {
+ .s_power = et8ek8_set_power,
+};
+
+static const struct v4l2_subdev_pad_ops et8ek8_pad_ops = {
+ .enum_mbus_code = et8ek8_enum_mbus_code,
+ .enum_frame_size = et8ek8_enum_frame_size,
+ .enum_frame_interval = et8ek8_enum_frame_ival,
+ .get_fmt = et8ek8_get_pad_format,
+ .set_fmt = et8ek8_set_pad_format,
+};
+
+static const struct v4l2_subdev_ops et8ek8_ops = {
+ .core = &et8ek8_core_ops,
+ .video = &et8ek8_video_ops,
+ .pad = &et8ek8_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops et8ek8_internal_ops = {
+ .registered = et8ek8_registered,
+ .open = et8ek8_open,
+ .close = et8ek8_close,
+};
+
+/* --------------------------------------------------------------------------
+ * I2C driver
+ */
+static int __maybe_unused et8ek8_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+
+ if (!sensor->power_count)
+ return 0;
+
+ return __et8ek8_set_power(sensor, false);
+}
+
+static int __maybe_unused et8ek8_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+
+ if (!sensor->power_count)
+ return 0;
+
+ return __et8ek8_set_power(sensor, true);
+}
+
+static int et8ek8_probe(struct i2c_client *client,
+ const struct i2c_device_id *devid)
+{
+ struct et8ek8_sensor *sensor;
+ struct device *dev = &client->dev;
+ int ret;
+
+ sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL);
+ if (!sensor)
+ return -ENOMEM;
+
+ sensor->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(sensor->reset)) {
+ dev_dbg(&client->dev, "could not request reset gpio\n");
+ return PTR_ERR(sensor->reset);
+ }
+
+ sensor->vana = devm_regulator_get(dev, "vana");
+ if (IS_ERR(sensor->vana)) {
+ dev_err(&client->dev, "could not get regulator for vana\n");
+ return PTR_ERR(sensor->vana);
+ }
+
+ sensor->ext_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(sensor->ext_clk)) {
+ dev_err(&client->dev, "could not get clock\n");
+ return PTR_ERR(sensor->ext_clk);
+ }
+
+ ret = of_property_read_u32(dev->of_node, "clock-frequency",
+ &sensor->xclk_freq);
+ if (ret) {
+ dev_warn(dev, "can't get clock-frequency\n");
+ return ret;
+ }
+
+ mutex_init(&sensor->power_lock);
+
+ v4l2_i2c_subdev_init(&sensor->subdev, client, &et8ek8_ops);
+ sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ sensor->subdev.internal_ops = &et8ek8_internal_ops;
+
+ sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_pads_init(&sensor->subdev.entity, 1, &sensor->pad);
+ if (ret < 0) {
+ dev_err(&client->dev, "media entity init failed!\n");
+ goto err_mutex;
+ }
+
+ ret = v4l2_async_register_subdev(&sensor->subdev);
+ if (ret < 0)
+ goto err_entity;
+
+ dev_dbg(dev, "initialized!\n");
+
+ return 0;
+
+err_entity:
+ media_entity_cleanup(&sensor->subdev.entity);
+err_mutex:
+ mutex_destroy(&sensor->power_lock);
+ return ret;
+}
+
+static int __exit et8ek8_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+ struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
+
+ if (sensor->power_count) {
+ WARN_ON(1);
+ et8ek8_power_off(sensor);
+ sensor->power_count = 0;
+ }
+
+ v4l2_device_unregister_subdev(&sensor->subdev);
+ device_remove_file(&client->dev, &dev_attr_priv_mem);
+ v4l2_ctrl_handler_free(&sensor->ctrl_handler);
+ v4l2_async_unregister_subdev(&sensor->subdev);
+ media_entity_cleanup(&sensor->subdev.entity);
+ mutex_destroy(&sensor->power_lock);
+
+ return 0;
+}
+
+static const struct of_device_id et8ek8_of_table[] = {
+ { .compatible = "toshiba,et8ek8" },
+ { },
+};
+
+static const struct i2c_device_id et8ek8_id_table[] = {
+ { ET8EK8_NAME, 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, et8ek8_id_table);
+
+static const struct dev_pm_ops et8ek8_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(et8ek8_suspend, et8ek8_resume)
+};
+
+static struct i2c_driver et8ek8_i2c_driver = {
+ .driver = {
+ .name = ET8EK8_NAME,
+ .pm = &et8ek8_pm_ops,
+ .of_match_table = et8ek8_of_table,
+ },
+ .probe = et8ek8_probe,
+ .remove = __exit_p(et8ek8_remove),
+ .id_table = et8ek8_id_table,
+};
+
+module_i2c_driver(et8ek8_i2c_driver);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@....fi>, Pavel Machek <pavel@....cz");
+MODULE_DESCRIPTION("Toshiba ET8EK8 camera sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/i2c/et8ek8/et8ek8_mode.c b/drivers/media/i2c/et8ek8/et8ek8_mode.c
new file mode 100644
index 0000000..a79882a
--- /dev/null
+++ b/drivers/media/i2c/et8ek8/et8ek8_mode.c
@@ -0,0 +1,587 @@
+/*
+ * et8ek8_mode.c
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Sakari Ailus <sakari.ailus@....fi>
+ * Tuukka Toivonen <tuukkat76@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include "et8ek8_reg.h"
+
+/*
+ * Stingray sensor mode settings for Scooby
+ */
+
+/* Mode1_poweron_Mode2_16VGA_2592x1968_12.07fps */
+static struct et8ek8_reglist mode1_poweron_mode2_16vga_2592x1968_12_07fps = {
+/* (without the +1)
+ * SPCK = 80 MHz
+ * CCP2 = 640 MHz
+ * VCO = 640 MHz
+ * VCOUNT = 84 (2016)
+ * HCOUNT = 137 (3288)
+ * CKREF_DIV = 2
+ * CKVAR_DIV = 200
+ * VCO_DIV = 0
+ * SPCK_DIV = 7
+ * MRCK_DIV = 7
+ * LVDSCK_DIV = 0
+ */
+ .type = ET8EK8_REGLIST_POWERON,
+ .mode = {
+ .sensor_width = 2592,
+ .sensor_height = 1968,
+ .sensor_window_origin_x = 0,
+ .sensor_window_origin_y = 0,
+ .sensor_window_width = 2592,
+ .sensor_window_height = 1968,
+ .width = 3288,
+ .height = 2016,
+ .window_origin_x = 0,
+ .window_origin_y = 0,
+ .window_width = 2592,
+ .window_height = 1968,
+ .pixel_clock = 80000000,
+ .ext_clock = 9600000,
+ .timeperframe = {
+ .numerator = 100,
+ .denominator = 1207
+ },
+ .max_exp = 2012,
+ /* .max_gain = 0, */
+ .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .sensitivity = 65536
+ },
+ .regs = {
+ /* Need to set firstly */
+ { ET8EK8_REG_8BIT, 0x126C, 0xCC },
+ /* Strobe and Data of CCP2 delay are minimized. */
+ { ET8EK8_REG_8BIT, 0x1269, 0x00 },
+ /* Refined value of Min H_COUNT */
+ { ET8EK8_REG_8BIT, 0x1220, 0x89 },
+ /* Frequency of SPCK setting (SPCK=MRCK) */
+ { ET8EK8_REG_8BIT, 0x123A, 0x07 },
+ { ET8EK8_REG_8BIT, 0x1241, 0x94 },
+ { ET8EK8_REG_8BIT, 0x1242, 0x02 },
+ { ET8EK8_REG_8BIT, 0x124B, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1255, 0xFF },
+ { ET8EK8_REG_8BIT, 0x1256, 0x9F },
+ { ET8EK8_REG_8BIT, 0x1258, 0x00 },
+ /* From parallel out to serial out */
+ { ET8EK8_REG_8BIT, 0x125D, 0x88 },
+ /* From w/ embeded data to w/o embeded data */
+ { ET8EK8_REG_8BIT, 0x125E, 0xC0 },
+ /* CCP2 out is from STOP to ACTIVE */
+ { ET8EK8_REG_8BIT, 0x1263, 0x98 },
+ { ET8EK8_REG_8BIT, 0x1268, 0xC6 },
+ { ET8EK8_REG_8BIT, 0x1434, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1163, 0x44 },
+ { ET8EK8_REG_8BIT, 0x1166, 0x29 },
+ { ET8EK8_REG_8BIT, 0x1140, 0x02 },
+ { ET8EK8_REG_8BIT, 0x1011, 0x24 },
+ { ET8EK8_REG_8BIT, 0x1151, 0x80 },
+ { ET8EK8_REG_8BIT, 0x1152, 0x23 },
+ /* Initial setting for improvement2 of lower frequency noise */
+ { ET8EK8_REG_8BIT, 0x1014, 0x05 },
+ { ET8EK8_REG_8BIT, 0x1033, 0x06 },
+ { ET8EK8_REG_8BIT, 0x1034, 0x79 },
+ { ET8EK8_REG_8BIT, 0x1423, 0x3F },
+ { ET8EK8_REG_8BIT, 0x1424, 0x3F },
+ { ET8EK8_REG_8BIT, 0x1426, 0x00 },
+ /* Switch of Preset-White-balance (0d:disable / 1d:enable) */
+ { ET8EK8_REG_8BIT, 0x1439, 0x00 },
+ /* Switch of blemish correction (0d:disable / 1d:enable) */
+ { ET8EK8_REG_8BIT, 0x161F, 0x60 },
+ /* Switch of auto noise correction (0d:disable / 1d:enable) */
+ { ET8EK8_REG_8BIT, 0x1634, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1646, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1648, 0x00 },
+ { ET8EK8_REG_8BIT, 0x113E, 0x01 },
+ { ET8EK8_REG_8BIT, 0x113F, 0x22 },
+ { ET8EK8_REG_8BIT, 0x1239, 0x64 },
+ { ET8EK8_REG_8BIT, 0x1238, 0x02 },
+ { ET8EK8_REG_8BIT, 0x123B, 0x70 },
+ { ET8EK8_REG_8BIT, 0x123A, 0x07 },
+ { ET8EK8_REG_8BIT, 0x121B, 0x64 },
+ { ET8EK8_REG_8BIT, 0x121D, 0x64 },
+ { ET8EK8_REG_8BIT, 0x1221, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1220, 0x89 },
+ { ET8EK8_REG_8BIT, 0x1223, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1222, 0x54 },
+ { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */
+ { ET8EK8_REG_TERM, 0, 0}
+ }
+};
+
+/* Mode1_16VGA_2592x1968_13.12fps_DPCM10-8 */
+static struct et8ek8_reglist mode1_16vga_2592x1968_13_12fps_dpcm10_8 = {
+/* (without the +1)
+ * SPCK = 80 MHz
+ * CCP2 = 560 MHz
+ * VCO = 560 MHz
+ * VCOUNT = 84 (2016)
+ * HCOUNT = 128 (3072)
+ * CKREF_DIV = 2
+ * CKVAR_DIV = 175
+ * VCO_DIV = 0
+ * SPCK_DIV = 6
+ * MRCK_DIV = 7
+ * LVDSCK_DIV = 0
+ */
+ .type = ET8EK8_REGLIST_MODE,
+ .mode = {
+ .sensor_width = 2592,
+ .sensor_height = 1968,
+ .sensor_window_origin_x = 0,
+ .sensor_window_origin_y = 0,
+ .sensor_window_width = 2592,
+ .sensor_window_height = 1968,
+ .width = 3072,
+ .height = 2016,
+ .window_origin_x = 0,
+ .window_origin_y = 0,
+ .window_width = 2592,
+ .window_height = 1968,
+ .pixel_clock = 80000000,
+ .ext_clock = 9600000,
+ .timeperframe = {
+ .numerator = 100,
+ .denominator = 1292
+ },
+ .max_exp = 2012,
+ /* .max_gain = 0, */
+ .bus_format = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
+ .sensitivity = 65536
+ },
+ .regs = {
+ { ET8EK8_REG_8BIT, 0x1239, 0x57 },
+ { ET8EK8_REG_8BIT, 0x1238, 0x82 },
+ { ET8EK8_REG_8BIT, 0x123B, 0x70 },
+ { ET8EK8_REG_8BIT, 0x123A, 0x06 },
+ { ET8EK8_REG_8BIT, 0x121B, 0x64 },
+ { ET8EK8_REG_8BIT, 0x121D, 0x64 },
+ { ET8EK8_REG_8BIT, 0x1221, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1220, 0x80 }, /* <-changed to v14 7E->80 */
+ { ET8EK8_REG_8BIT, 0x1223, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1222, 0x54 },
+ { ET8EK8_REG_8BIT, 0x125D, 0x83 }, /* CCP_LVDS_MODE/ */
+ { ET8EK8_REG_TERM, 0, 0}
+ }
+};
+
+/* Mode3_4VGA_1296x984_29.99fps_DPCM10-8 */
+static struct et8ek8_reglist mode3_4vga_1296x984_29_99fps_dpcm10_8 = {
+/* (without the +1)
+ * SPCK = 96.5333333333333 MHz
+ * CCP2 = 579.2 MHz
+ * VCO = 579.2 MHz
+ * VCOUNT = 84 (2016)
+ * HCOUNT = 133 (3192)
+ * CKREF_DIV = 2
+ * CKVAR_DIV = 181
+ * VCO_DIV = 0
+ * SPCK_DIV = 5
+ * MRCK_DIV = 7
+ * LVDSCK_DIV = 0
+ */
+ .type = ET8EK8_REGLIST_MODE,
+ .mode = {
+ .sensor_width = 2592,
+ .sensor_height = 1968,
+ .sensor_window_origin_x = 0,
+ .sensor_window_origin_y = 0,
+ .sensor_window_width = 2592,
+ .sensor_window_height = 1968,
+ .width = 3192,
+ .height = 1008,
+ .window_origin_x = 0,
+ .window_origin_y = 0,
+ .window_width = 1296,
+ .window_height = 984,
+ .pixel_clock = 96533333,
+ .ext_clock = 9600000,
+ .timeperframe = {
+ .numerator = 100,
+ .denominator = 3000
+ },
+ .max_exp = 1004,
+ /* .max_gain = 0, */
+ .bus_format = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
+ .sensitivity = 65536
+ },
+ .regs = {
+ { ET8EK8_REG_8BIT, 0x1239, 0x5A },
+ { ET8EK8_REG_8BIT, 0x1238, 0x82 },
+ { ET8EK8_REG_8BIT, 0x123B, 0x70 },
+ { ET8EK8_REG_8BIT, 0x123A, 0x05 },
+ { ET8EK8_REG_8BIT, 0x121B, 0x63 },
+ { ET8EK8_REG_8BIT, 0x1220, 0x85 },
+ { ET8EK8_REG_8BIT, 0x1221, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1222, 0x54 },
+ { ET8EK8_REG_8BIT, 0x1223, 0x00 },
+ { ET8EK8_REG_8BIT, 0x121D, 0x63 },
+ { ET8EK8_REG_8BIT, 0x125D, 0x83 }, /* CCP_LVDS_MODE/ */
+ { ET8EK8_REG_TERM, 0, 0}
+ }
+};
+
+/* Mode4_SVGA_864x656_29.88fps */
+static struct et8ek8_reglist mode4_svga_864x656_29_88fps = {
+/* (without the +1)
+ * SPCK = 80 MHz
+ * CCP2 = 320 MHz
+ * VCO = 640 MHz
+ * VCOUNT = 84 (2016)
+ * HCOUNT = 166 (3984)
+ * CKREF_DIV = 2
+ * CKVAR_DIV = 200
+ * VCO_DIV = 0
+ * SPCK_DIV = 7
+ * MRCK_DIV = 7
+ * LVDSCK_DIV = 1
+ */
+ .type = ET8EK8_REGLIST_MODE,
+ .mode = {
+ .sensor_width = 2592,
+ .sensor_height = 1968,
+ .sensor_window_origin_x = 0,
+ .sensor_window_origin_y = 0,
+ .sensor_window_width = 2592,
+ .sensor_window_height = 1968,
+ .width = 3984,
+ .height = 672,
+ .window_origin_x = 0,
+ .window_origin_y = 0,
+ .window_width = 864,
+ .window_height = 656,
+ .pixel_clock = 80000000,
+ .ext_clock = 9600000,
+ .timeperframe = {
+ .numerator = 100,
+ .denominator = 2988
+ },
+ .max_exp = 668,
+ /* .max_gain = 0, */
+ .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .sensitivity = 65536
+ },
+ .regs = {
+ { ET8EK8_REG_8BIT, 0x1239, 0x64 },
+ { ET8EK8_REG_8BIT, 0x1238, 0x02 },
+ { ET8EK8_REG_8BIT, 0x123B, 0x71 },
+ { ET8EK8_REG_8BIT, 0x123A, 0x07 },
+ { ET8EK8_REG_8BIT, 0x121B, 0x62 },
+ { ET8EK8_REG_8BIT, 0x121D, 0x62 },
+ { ET8EK8_REG_8BIT, 0x1221, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1220, 0xA6 },
+ { ET8EK8_REG_8BIT, 0x1223, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1222, 0x54 },
+ { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */
+ { ET8EK8_REG_TERM, 0, 0}
+ }
+};
+
+/* Mode5_VGA_648x492_29.93fps */
+static struct et8ek8_reglist mode5_vga_648x492_29_93fps = {
+/* (without the +1)
+ * SPCK = 80 MHz
+ * CCP2 = 320 MHz
+ * VCO = 640 MHz
+ * VCOUNT = 84 (2016)
+ * HCOUNT = 221 (5304)
+ * CKREF_DIV = 2
+ * CKVAR_DIV = 200
+ * VCO_DIV = 0
+ * SPCK_DIV = 7
+ * MRCK_DIV = 7
+ * LVDSCK_DIV = 1
+ */
+ .type = ET8EK8_REGLIST_MODE,
+ .mode = {
+ .sensor_width = 2592,
+ .sensor_height = 1968,
+ .sensor_window_origin_x = 0,
+ .sensor_window_origin_y = 0,
+ .sensor_window_width = 2592,
+ .sensor_window_height = 1968,
+ .width = 5304,
+ .height = 504,
+ .window_origin_x = 0,
+ .window_origin_y = 0,
+ .window_width = 648,
+ .window_height = 492,
+ .pixel_clock = 80000000,
+ .ext_clock = 9600000,
+ .timeperframe = {
+ .numerator = 100,
+ .denominator = 2993
+ },
+ .max_exp = 500,
+ /* .max_gain = 0, */
+ .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .sensitivity = 65536
+ },
+ .regs = {
+ { ET8EK8_REG_8BIT, 0x1239, 0x64 },
+ { ET8EK8_REG_8BIT, 0x1238, 0x02 },
+ { ET8EK8_REG_8BIT, 0x123B, 0x71 },
+ { ET8EK8_REG_8BIT, 0x123A, 0x07 },
+ { ET8EK8_REG_8BIT, 0x121B, 0x61 },
+ { ET8EK8_REG_8BIT, 0x121D, 0x61 },
+ { ET8EK8_REG_8BIT, 0x1221, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1220, 0xDD },
+ { ET8EK8_REG_8BIT, 0x1223, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1222, 0x54 },
+ { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */
+ { ET8EK8_REG_TERM, 0, 0}
+ }
+};
+
+/* Mode2_16VGA_2592x1968_3.99fps */
+static struct et8ek8_reglist mode2_16vga_2592x1968_3_99fps = {
+/* (without the +1)
+ * SPCK = 80 MHz
+ * CCP2 = 640 MHz
+ * VCO = 640 MHz
+ * VCOUNT = 254 (6096)
+ * HCOUNT = 137 (3288)
+ * CKREF_DIV = 2
+ * CKVAR_DIV = 200
+ * VCO_DIV = 0
+ * SPCK_DIV = 7
+ * MRCK_DIV = 7
+ * LVDSCK_DIV = 0
+ */
+ .type = ET8EK8_REGLIST_MODE,
+ .mode = {
+ .sensor_width = 2592,
+ .sensor_height = 1968,
+ .sensor_window_origin_x = 0,
+ .sensor_window_origin_y = 0,
+ .sensor_window_width = 2592,
+ .sensor_window_height = 1968,
+ .width = 3288,
+ .height = 6096,
+ .window_origin_x = 0,
+ .window_origin_y = 0,
+ .window_width = 2592,
+ .window_height = 1968,
+ .pixel_clock = 80000000,
+ .ext_clock = 9600000,
+ .timeperframe = {
+ .numerator = 100,
+ .denominator = 399
+ },
+ .max_exp = 6092,
+ /* .max_gain = 0, */
+ .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .sensitivity = 65536
+ },
+ .regs = {
+ { ET8EK8_REG_8BIT, 0x1239, 0x64 },
+ { ET8EK8_REG_8BIT, 0x1238, 0x02 },
+ { ET8EK8_REG_8BIT, 0x123B, 0x70 },
+ { ET8EK8_REG_8BIT, 0x123A, 0x07 },
+ { ET8EK8_REG_8BIT, 0x121B, 0x64 },
+ { ET8EK8_REG_8BIT, 0x121D, 0x64 },
+ { ET8EK8_REG_8BIT, 0x1221, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1220, 0x89 },
+ { ET8EK8_REG_8BIT, 0x1223, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1222, 0xFE },
+ { ET8EK8_REG_TERM, 0, 0}
+ }
+};
+
+/* Mode_648x492_5fps */
+static struct et8ek8_reglist mode_648x492_5fps = {
+/* (without the +1)
+ * SPCK = 13.3333333333333 MHz
+ * CCP2 = 53.3333333333333 MHz
+ * VCO = 640 MHz
+ * VCOUNT = 84 (2016)
+ * HCOUNT = 221 (5304)
+ * CKREF_DIV = 2
+ * CKVAR_DIV = 200
+ * VCO_DIV = 5
+ * SPCK_DIV = 7
+ * MRCK_DIV = 7
+ * LVDSCK_DIV = 1
+ */
+ .type = ET8EK8_REGLIST_MODE,
+ .mode = {
+ .sensor_width = 2592,
+ .sensor_height = 1968,
+ .sensor_window_origin_x = 0,
+ .sensor_window_origin_y = 0,
+ .sensor_window_width = 2592,
+ .sensor_window_height = 1968,
+ .width = 5304,
+ .height = 504,
+ .window_origin_x = 0,
+ .window_origin_y = 0,
+ .window_width = 648,
+ .window_height = 492,
+ .pixel_clock = 13333333,
+ .ext_clock = 9600000,
+ .timeperframe = {
+ .numerator = 100,
+ .denominator = 499
+ },
+ .max_exp = 500,
+ /* .max_gain = 0, */
+ .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .sensitivity = 65536
+ },
+ .regs = {
+ { ET8EK8_REG_8BIT, 0x1239, 0x64 },
+ { ET8EK8_REG_8BIT, 0x1238, 0x02 },
+ { ET8EK8_REG_8BIT, 0x123B, 0x71 },
+ { ET8EK8_REG_8BIT, 0x123A, 0x57 },
+ { ET8EK8_REG_8BIT, 0x121B, 0x61 },
+ { ET8EK8_REG_8BIT, 0x121D, 0x61 },
+ { ET8EK8_REG_8BIT, 0x1221, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1220, 0xDD },
+ { ET8EK8_REG_8BIT, 0x1223, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1222, 0x54 },
+ { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */
+ { ET8EK8_REG_TERM, 0, 0}
+ }
+};
+
+/* Mode3_4VGA_1296x984_5fps */
+static struct et8ek8_reglist mode3_4vga_1296x984_5fps = {
+/* (without the +1)
+ * SPCK = 49.4 MHz
+ * CCP2 = 395.2 MHz
+ * VCO = 790.4 MHz
+ * VCOUNT = 250 (6000)
+ * HCOUNT = 137 (3288)
+ * CKREF_DIV = 2
+ * CKVAR_DIV = 247
+ * VCO_DIV = 1
+ * SPCK_DIV = 7
+ * MRCK_DIV = 7
+ * LVDSCK_DIV = 0
+ */
+ .type = ET8EK8_REGLIST_MODE,
+ .mode = {
+ .sensor_width = 2592,
+ .sensor_height = 1968,
+ .sensor_window_origin_x = 0,
+ .sensor_window_origin_y = 0,
+ .sensor_window_width = 2592,
+ .sensor_window_height = 1968,
+ .width = 3288,
+ .height = 3000,
+ .window_origin_x = 0,
+ .window_origin_y = 0,
+ .window_width = 1296,
+ .window_height = 984,
+ .pixel_clock = 49400000,
+ .ext_clock = 9600000,
+ .timeperframe = {
+ .numerator = 100,
+ .denominator = 501
+ },
+ .max_exp = 2996,
+ /* .max_gain = 0, */
+ .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .sensitivity = 65536
+ },
+ .regs = {
+ { ET8EK8_REG_8BIT, 0x1239, 0x7B },
+ { ET8EK8_REG_8BIT, 0x1238, 0x82 },
+ { ET8EK8_REG_8BIT, 0x123B, 0x70 },
+ { ET8EK8_REG_8BIT, 0x123A, 0x17 },
+ { ET8EK8_REG_8BIT, 0x121B, 0x63 },
+ { ET8EK8_REG_8BIT, 0x121D, 0x63 },
+ { ET8EK8_REG_8BIT, 0x1221, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1220, 0x89 },
+ { ET8EK8_REG_8BIT, 0x1223, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1222, 0xFA },
+ { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */
+ { ET8EK8_REG_TERM, 0, 0}
+ }
+};
+
+/* Mode_4VGA_1296x984_25fps_DPCM10-8 */
+static struct et8ek8_reglist mode_4vga_1296x984_25fps_dpcm10_8 = {
+/* (without the +1)
+ * SPCK = 84.2666666666667 MHz
+ * CCP2 = 505.6 MHz
+ * VCO = 505.6 MHz
+ * VCOUNT = 88 (2112)
+ * HCOUNT = 133 (3192)
+ * CKREF_DIV = 2
+ * CKVAR_DIV = 158
+ * VCO_DIV = 0
+ * SPCK_DIV = 5
+ * MRCK_DIV = 7
+ * LVDSCK_DIV = 0
+ */
+ .type = ET8EK8_REGLIST_MODE,
+ .mode = {
+ .sensor_width = 2592,
+ .sensor_height = 1968,
+ .sensor_window_origin_x = 0,
+ .sensor_window_origin_y = 0,
+ .sensor_window_width = 2592,
+ .sensor_window_height = 1968,
+ .width = 3192,
+ .height = 1056,
+ .window_origin_x = 0,
+ .window_origin_y = 0,
+ .window_width = 1296,
+ .window_height = 984,
+ .pixel_clock = 84266667,
+ .ext_clock = 9600000,
+ .timeperframe = {
+ .numerator = 100,
+ .denominator = 2500
+ },
+ .max_exp = 1052,
+ /* .max_gain = 0, */
+ .bus_format = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
+ .sensitivity = 65536
+ },
+ .regs = {
+ { ET8EK8_REG_8BIT, 0x1239, 0x4F },
+ { ET8EK8_REG_8BIT, 0x1238, 0x02 },
+ { ET8EK8_REG_8BIT, 0x123B, 0x70 },
+ { ET8EK8_REG_8BIT, 0x123A, 0x05 },
+ { ET8EK8_REG_8BIT, 0x121B, 0x63 },
+ { ET8EK8_REG_8BIT, 0x1220, 0x85 },
+ { ET8EK8_REG_8BIT, 0x1221, 0x00 },
+ { ET8EK8_REG_8BIT, 0x1222, 0x58 },
+ { ET8EK8_REG_8BIT, 0x1223, 0x00 },
+ { ET8EK8_REG_8BIT, 0x121D, 0x63 },
+ { ET8EK8_REG_8BIT, 0x125D, 0x83 },
+ { ET8EK8_REG_TERM, 0, 0}
+ }
+};
+
+struct et8ek8_meta_reglist meta_reglist = {
+ .version = "V14 03-June-2008",
+ .reglist = {
+ { .ptr = &mode1_poweron_mode2_16vga_2592x1968_12_07fps },
+ { .ptr = &mode1_16vga_2592x1968_13_12fps_dpcm10_8 },
+ { .ptr = &mode3_4vga_1296x984_29_99fps_dpcm10_8 },
+ { .ptr = &mode4_svga_864x656_29_88fps },
+ { .ptr = &mode5_vga_648x492_29_93fps },
+ { .ptr = &mode2_16vga_2592x1968_3_99fps },
+ { .ptr = &mode_648x492_5fps },
+ { .ptr = &mode3_4vga_1296x984_5fps },
+ { .ptr = &mode_4vga_1296x984_25fps_dpcm10_8 },
+ { .ptr = NULL }
+ }
+};
diff --git a/drivers/media/i2c/et8ek8/et8ek8_reg.h b/drivers/media/i2c/et8ek8/et8ek8_reg.h
new file mode 100644
index 0000000..07f1873
--- /dev/null
+++ b/drivers/media/i2c/et8ek8/et8ek8_reg.h
@@ -0,0 +1,96 @@
+/*
+ * et8ek8_reg.h
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Sakari Ailus <sakari.ailus@....fi>
+ * Tuukka Toivonen <tuukkat76@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef ET8EK8REGS_H
+#define ET8EK8REGS_H
+
+#include <linux/i2c.h>
+#include <linux/types.h>
+#include <linux/videodev2.h>
+#include <linux/v4l2-subdev.h>
+
+struct v4l2_mbus_framefmt;
+struct v4l2_subdev_pad_mbus_code_enum;
+
+struct et8ek8_mode {
+ /* Physical sensor resolution and current image window */
+ u16 sensor_width;
+ u16 sensor_height;
+ u16 sensor_window_origin_x;
+ u16 sensor_window_origin_y;
+ u16 sensor_window_width;
+ u16 sensor_window_height;
+
+ /* Image data coming from sensor (after scaling) */
+ u16 width;
+ u16 height;
+ u16 window_origin_x;
+ u16 window_origin_y;
+ u16 window_width;
+ u16 window_height;
+
+ u32 pixel_clock; /* in Hz */
+ u32 ext_clock; /* in Hz */
+ struct v4l2_fract timeperframe;
+ u32 max_exp; /* Maximum exposure value */
+ u32 bus_format; /* MEDIA_BUS_FMT_ */
+ u32 sensitivity; /* 16.16 fixed point */
+};
+
+#define ET8EK8_REG_8BIT 1
+#define ET8EK8_REG_16BIT 2
+#define ET8EK8_REG_DELAY 100
+#define ET8EK8_REG_TERM 0xff
+struct et8ek8_reg {
+ u16 type;
+ u16 reg; /* 16-bit offset */
+ u32 val; /* 8/16/32-bit value */
+};
+
+/* Possible struct smia_reglist types. */
+#define ET8EK8_REGLIST_STANDBY 0
+#define ET8EK8_REGLIST_POWERON 1
+#define ET8EK8_REGLIST_RESUME 2
+#define ET8EK8_REGLIST_STREAMON 3
+#define ET8EK8_REGLIST_STREAMOFF 4
+#define ET8EK8_REGLIST_DISABLED 5
+
+#define ET8EK8_REGLIST_MODE 10
+
+#define ET8EK8_REGLIST_LSC_ENABLE 100
+#define ET8EK8_REGLIST_LSC_DISABLE 101
+#define ET8EK8_REGLIST_ANR_ENABLE 102
+#define ET8EK8_REGLIST_ANR_DISABLE 103
+
+struct et8ek8_reglist {
+ u32 type;
+ struct et8ek8_mode mode;
+ struct et8ek8_reg regs[];
+};
+
+#define ET8EK8_MAX_LEN 32
+struct et8ek8_meta_reglist {
+ char version[ET8EK8_MAX_LEN];
+ union {
+ struct et8ek8_reglist *ptr;
+ } reglist[];
+};
+
+extern struct et8ek8_meta_reglist meta_reglist;
+
+#endif /* ET8EK8REGS */
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Download attachment "signature.asc" of type "application/pgp-signature" (182 bytes)
Powered by blists - more mailing lists