| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20161214165921.jsatcznbljd7anqi@earth>
Date: Wed, 14 Dec 2016 17:59:21 +0100
From: Sebastian Reichel <sre@...nel.org>
To: Peter Rosin <peda@...ntia.se>
Cc: linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v2 3/3] power: supply: bq24735-charger: allow chargers to
share the ac-detect gpio
Hi,
On Wed, Dec 14, 2016 at 12:56:45AM +0100, Peter Rosin wrote:
> If several parallel bq24735 chargers have their ac-detect gpios wired
> together (or if only one of the parallel bq24735 chargers have its
> ac-detect pin wired to a gpio, and the others are assumed to react the
> same), then all driver instances need to check the same gpio. But the
> gpio subsystem does not allow sharing gpios, so handle that locally.
Adding GPIO subsystem people to see if they can come up with
something in the gpiod API for this usecase.
> However, only do this for the polling case, sharing is not supported if
> the ac detection is handled with interrupts.
Why? I guess you only added the gpio polling stuff for the shared
gpio feature, so we can skip the gpio polling if we add shared irq
support instead?
> Signed-off-by: Peter Rosin <peda@...ntia.se>
> ---
> drivers/power/supply/bq24735-charger.c | 111 +++++++++++++++++++++++++++++----
> 1 file changed, 100 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/power/supply/bq24735-charger.c b/drivers/power/supply/bq24735-charger.c
> index f45876927676..c2403c4d5ece 100644
> --- a/drivers/power/supply/bq24735-charger.c
> +++ b/drivers/power/supply/bq24735-charger.c
> @@ -25,6 +25,7 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/of_gpio.h>
> #include <linux/gpio/consumer.h>
> #include <linux/power_supply.h>
> #include <linux/slab.h>
> @@ -43,12 +44,24 @@
> #define BQ24735_MANUFACTURER_ID 0xfe
> #define BQ24735_DEVICE_ID 0xff
>
> +struct bq24735;
> +
> +struct bq24735_shared {
> + struct list_head list;
> + struct bq24735 *owner;
> + struct gpio_desc *status_gpio;
> +};
> +
> +static DEFINE_MUTEX(shared_lock);
> +static LIST_HEAD(shared_list);
> +
> struct bq24735 {
> struct power_supply *charger;
> struct power_supply_desc charger_desc;
> struct i2c_client *client;
> struct bq24735_platform *pdata;
> struct mutex lock;
> + struct bq24735_shared *shared;
> struct gpio_desc *status_gpio;
> struct delayed_work poll;
> u32 poll_interval;
> @@ -346,6 +359,75 @@ static struct bq24735_platform *bq24735_parse_dt_data(struct i2c_client *client)
> return pdata;
> }
>
> +static struct gpio_desc *bq24735_get_status_gpio(struct bq24735 *charger)
> +{
> + struct device *dev = &charger->client->dev;
> + struct bq24735_shared *shared;
> + int gpio;
> + enum of_gpio_flags flags;
> + int active_low;
> + struct list_head *pos;
> +
> + if (of_property_read_bool(dev->of_node, "ti,ac-detect-gpios"))
> + gpio = of_get_named_gpio_flags(dev->of_node,
> + "ti,ac-detect-gpios", 0, &flags);
> + else if (of_property_read_bool(dev->of_node, "ti,ac-detect-gpio"))
> + gpio = of_get_named_gpio_flags(dev->of_node,
> + "ti,ac-detect-gpio", 0, &flags);
> + else
> + return NULL;
> +
> + if (!gpio_is_valid(gpio))
> + return ERR_PTR(gpio);
> + active_low = flags & OF_GPIO_ACTIVE_LOW;
> +
> + mutex_lock(&shared_lock);
> + list_for_each(pos, &shared_list) {
> + shared = list_entry(pos, struct bq24735_shared, list);
> + if (gpio != desc_to_gpio(shared->status_gpio))
> + continue;
> + if (!active_low ^ !gpiod_is_active_low(shared->status_gpio))
> + continue;
> +
> + get_device(&shared->owner->client->dev);
> + dev_dbg(dev, "sharing gpio with %s\n",
> + shared->owner->pdata->name);
> + charger->shared = shared;
> + mutex_unlock(&shared_lock);
> + return shared->status_gpio;
> + }
> +
> + shared = devm_kzalloc(dev, sizeof(*shared), GFP_KERNEL);
> + if (!shared) {
> + mutex_unlock(&shared_lock);
> + return ERR_PTR(-ENOMEM);
> + }
> + shared->owner = charger;
> + shared->status_gpio = gpiod_get(dev, "ti,ac-detect", GPIOD_IN);
> + if (!IS_ERR(shared->status_gpio)) {
> + charger->shared = shared;
> + list_add(&shared->list, &shared_list);
> + }
> + mutex_unlock(&shared_lock);
> +
> + return shared->status_gpio;
> +}
> +
> +static void bq24735_put_status_gpio(struct bq24735 *charger)
> +{
> + if (!charger->shared)
> + return;
> +
> + mutex_lock(&shared_lock);
> + if (charger->shared->owner != charger) {
> + put_device(&charger->shared->owner->client->dev);
> + } else {
> + list_del(&charger->shared->list);
> + gpiod_put(charger->shared->status_gpio);
> + }
> + mutex_unlock(&shared_lock);
> +}
> +
> static int bq24735_charger_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -402,9 +484,7 @@ static int bq24735_charger_probe(struct i2c_client *client,
>
> i2c_set_clientdata(client, charger);
>
> - charger->status_gpio = devm_gpiod_get_optional(&client->dev,
> - "ti,ac-detect",
> - GPIOD_IN);
> + charger->status_gpio = bq24735_get_status_gpio(charger);
> if (IS_ERR(charger->status_gpio)) {
> ret = PTR_ERR(charger->status_gpio);
> dev_err(&client->dev, "Getting gpio failed: %d\n", ret);
> @@ -416,28 +496,30 @@ static int bq24735_charger_probe(struct i2c_client *client,
> if (ret < 0) {
> dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
> ret);
> - return ret;
> + goto out;
> } else if (ret != 0x0040) {
> dev_err(&client->dev,
> "manufacturer id mismatch. 0x0040 != 0x%04x\n", ret);
> - return -ENODEV;
> + ret = -ENODEV;
> + goto out;
> }
>
> ret = bq24735_read_word(client, BQ24735_DEVICE_ID);
> if (ret < 0) {
> dev_err(&client->dev, "Failed to read device id : %d\n", ret);
> - return ret;
> + goto out;
> } else if (ret != 0x000B) {
> dev_err(&client->dev,
> "device id mismatch. 0x000b != 0x%04x\n", ret);
> - return -ENODEV;
> + ret = -ENODEV;
> + goto out;
> }
> }
>
> ret = bq24735_config_charger(charger);
> if (ret < 0) {
> dev_err(&client->dev, "failed in configuring charger");
> - return ret;
> + goto out;
> }
>
> /* check for AC adapter presence */
> @@ -445,7 +527,7 @@ static int bq24735_charger_probe(struct i2c_client *client,
> ret = bq24735_enable_charging(charger);
> if (ret < 0) {
> dev_err(&client->dev, "Failed to enable charging\n");
> - return ret;
> + goto out;
> }
> }
>
> @@ -455,7 +537,7 @@ static int bq24735_charger_probe(struct i2c_client *client,
> ret = PTR_ERR(charger->charger);
> dev_err(&client->dev, "Failed to register power supply: %d\n",
> ret);
> - return ret;
> + goto out;
> }
>
> if (client->irq) {
> @@ -470,7 +552,7 @@ static int bq24735_charger_probe(struct i2c_client *client,
> dev_err(&client->dev,
> "Unable to register IRQ %d err %d\n",
> client->irq, ret);
> - return ret;
> + goto out;
> }
> } else if (charger->status_gpio) {
> ret = of_property_read_u32(client->dev.of_node,
> @@ -487,6 +569,11 @@ static int bq24735_charger_probe(struct i2c_client *client,
> }
>
> return 0;
> +
> +out:
> + bq24735_put_status_gpio(charger);
> +
> + return ret;
> }
>
> static int bq24735_charger_remove(struct i2c_client *client)
> @@ -496,6 +583,8 @@ static int bq24735_charger_remove(struct i2c_client *client)
> if (charger->poll_interval)
> cancel_delayed_work_sync(&charger->poll);
>
> + bq24735_put_status_gpio(charger);
> +
> return 0;
> }
>
> --
> 2.1.4
>
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists