| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHp75VckUWk0WsMFnHA9cYOz_095c-t_=kAMbbjrc+QjQ0E1qw@mail.gmail.com>
Date: Wed, 14 Dec 2016 03:41:57 +0200
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Benjamin Tissoires <benjamin.tissoires@...hat.com>
Cc: Darren Hart <dvhart@...radead.org>,
Bastien Nocera <hadess@...ess.net>,
Stephen J <stephenjust@...il.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
platform-driver-x86@...r.kernel.org
Subject: Re: [PATCH] platform: add custom surface3 platform device for
controlling LID
On Fri, Nov 25, 2016 at 6:11 PM, Benjamin Tissoires
<benjamin.tissoires@...hat.com> wrote:
> The LID state provided by ACPI on the Surface 3 is not accurate.
> The ACPI node doesn't get notified on LID open, which means the
> LID input switch stays close most of the time.
>
> Fortunatelly, there is a WMI method which directly queries the
> GPIO underneath the LID state, so it's far more reliable than ACPI.
> To get the notifications that the LID was opened/closed, we can
> rely on the ACPI notification of the touchscreen: the DSDT shows
> that the touchscreen will get notified on close/open as it also
> controls its _STA method.
>
> Note that we need to set the tag "power-switch" to the LID
> input node through a udev rule for logind to accept it:
>
> SUBSYSTEM=="input", KERNEL=="event*", KERNELS=="surface3-wmi", \
> TAG+="power-switch"
Pushed to testing with fixed Subject line (Pattern is "platform/x86:
Description").
Thanks.
>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@...hat.com>
> ---
> drivers/platform/x86/Kconfig | 12 ++
> drivers/platform/x86/Makefile | 1 +
> drivers/platform/x86/surface3-wmi.c | 296 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 309 insertions(+)
> create mode 100644 drivers/platform/x86/surface3-wmi.c
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index b8a21d7..152aac6 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -363,6 +363,18 @@ config IDEAPAD_LAPTOP
> This is a driver for Lenovo IdeaPad netbooks contains drivers for
> rfkill switch, hotkey, fan control and backlight control.
>
> +config SURFACE3_WMI
> + tristate "Surface 3 WMI Driver"
> + depends on ACPI_WMI
> + depends on DMI
> + depends on INPUT
> + depends on SPI
> + ---help---
> + Say Y here if you have a Surface 3.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called surface3-wmi.
> +
> config THINKPAD_ACPI
> tristate "ThinkPad ACPI Laptop Extras"
> depends on ACPI
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 2efa86d..38f5419 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -34,6 +34,7 @@ obj-$(CONFIG_PANASONIC_LAPTOP) += panasonic-laptop.o
> obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
> obj-$(CONFIG_ACPI_WMI) += wmi.o
> obj-$(CONFIG_MSI_WMI) += msi-wmi.o
> +obj-$(CONFIG_SURFACE3_WMI) += surface3-wmi.o
> obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o
>
> # toshiba_acpi must link after wmi to ensure that wmi devices are found
> diff --git a/drivers/platform/x86/surface3-wmi.c b/drivers/platform/x86/surface3-wmi.c
> new file mode 100644
> index 0000000..5553b2b
> --- /dev/null
> +++ b/drivers/platform/x86/surface3-wmi.c
> @@ -0,0 +1,296 @@
> +/*
> + * Driver for the LID cover switch of the Surface 3
> + *
> + * Copyright (c) 2016 Red Hat Inc.
> + */
> +
> +/*
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the Free
> + * Software Foundation; version 2 of the License.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +
> +#include <linux/acpi.h>
> +#include <linux/dmi.h>
> +#include <linux/input.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/spi/spi.h>
> +
> +MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@...hat.com>");
> +MODULE_DESCRIPTION("Surface 3 platform driver");
> +MODULE_LICENSE("GPL");
> +
> +#define ACPI_BUTTON_HID_LID "PNP0C0D"
> +#define SPI_CTL_OBJ_NAME "SPI"
> +#define SPI_TS_OBJ_NAME "NTRG"
> +
> +#define SURFACE3_LID_GUID "F7CC25EC-D20B-404C-8903-0ED4359C18AE"
> +
> +MODULE_ALIAS("wmi:" SURFACE3_LID_GUID);
> +
> +static const struct dmi_system_id surface3_dmi_table[] = {
> +#if defined(CONFIG_X86)
> + {
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
> + DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"),
> + },
> + },
> +#endif
> + { }
> +};
> +
> +struct surface3_wmi {
> + struct acpi_device *touchscreen_adev;
> + struct acpi_device *pnp0c0d_adev;
> + struct acpi_hotplug_context hp;
> + struct input_dev *input;
> +};
> +
> +static struct platform_device *s3_wmi_pdev;
> +
> +static struct surface3_wmi s3_wmi;
> +
> +static DEFINE_MUTEX(s3_wmi_lock);
> +
> +static int s3_wmi_query_block(const char *guid, int instance, int *ret)
> +{
> + acpi_status status;
> + union acpi_object *obj;
> +
> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> +
> + mutex_lock(&s3_wmi_lock);
> + status = wmi_query_block(guid, instance, &output);
> +
> + obj = output.pointer;
> +
> + if (!obj || obj->type != ACPI_TYPE_INTEGER) {
> + if (obj) {
> + pr_err("query block returned object type: %d - buffer length:%d\n",
> + obj->type,
> + obj->type == ACPI_TYPE_BUFFER ?
> + obj->buffer.length : 0);
> + }
> + kfree(obj);
> + return -EINVAL;
> + }
> + *ret = obj->integer.value;
> + kfree(obj);
> + mutex_unlock(&s3_wmi_lock);
> + return 0;
> +}
> +
> +static inline int s3_wmi_query_lid(int *ret)
> +{
> + return s3_wmi_query_block(SURFACE3_LID_GUID, 0, ret);
> +}
> +
> +static int s3_wmi_send_lid_state(void)
> +{
> + int ret, lid_sw;
> +
> + ret = s3_wmi_query_lid(&lid_sw);
> + if (ret)
> + return ret;
> +
> + input_report_switch(s3_wmi.input, SW_LID, lid_sw);
> + input_sync(s3_wmi.input);
> +
> + return 0;
> +}
> +
> +static int s3_wmi_hp_notify(struct acpi_device *adev, u32 value)
> +{
> + return s3_wmi_send_lid_state();
> +}
> +
> +static acpi_status s3_wmi_attach_spi_device(acpi_handle handle,
> + u32 level,
> + void *data,
> + void **return_value)
> +{
> + struct acpi_device *adev, **ts_adev;
> +
> + if (acpi_bus_get_device(handle, &adev))
> + return AE_OK;
> +
> + ts_adev = data;
> +
> + if (strncmp(acpi_device_bid(adev), SPI_TS_OBJ_NAME,
> + strlen(SPI_TS_OBJ_NAME)))
> + return AE_OK;
> +
> + if (*ts_adev) {
> + pr_err("duplicate entry %s\n", SPI_TS_OBJ_NAME);
> + return AE_OK;
> + }
> +
> + *ts_adev = adev;
> +
> + return AE_OK;
> +}
> +
> +static int s3_wmi_check_platform_device(struct device *dev, void *data)
> +{
> + struct acpi_device *adev, *ts_adev;
> + acpi_handle handle;
> + acpi_status status;
> +
> + /* ignore non ACPI devices */
> + handle = ACPI_HANDLE(dev);
> + if (!handle || acpi_bus_get_device(handle, &adev))
> + return 0;
> +
> + /* check for LID ACPI switch */
> + if (!strcmp(ACPI_BUTTON_HID_LID, acpi_device_hid(adev))) {
> + s3_wmi.pnp0c0d_adev = adev;
> + return 0;
> + }
> +
> + /* ignore non SPI controllers */
> + if (strncmp(acpi_device_bid(adev), SPI_CTL_OBJ_NAME,
> + strlen(SPI_CTL_OBJ_NAME)))
> + return 0;
> +
> + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
> + s3_wmi_attach_spi_device, NULL,
> + &ts_adev, NULL);
> + if (ACPI_FAILURE(status))
> + dev_warn(dev, "failed to enumerate SPI slaves\n");
> +
> + if (!ts_adev)
> + return 0;
> +
> + s3_wmi.touchscreen_adev = ts_adev;
> +
> + return 0;
> +}
> +
> +static int s3_wmi_create_and_register_input(struct platform_device *pdev)
> +{
> + struct input_dev *input;
> + int error;
> +
> + input = devm_input_allocate_device(&pdev->dev);
> + if (!input)
> + return -ENOMEM;
> +
> + input->name = "Lid Switch";
> + input->phys = "button/input0";
> + input->id.bustype = BUS_HOST;
> + input->id.product = 0x0005;
> +
> + input_set_capability(input, EV_SW, SW_LID);
> +
> + error = input_register_device(input);
> + if (error)
> + goto out_err;
> +
> + s3_wmi.input = input;
> +
> + return 0;
> + out_err:
> + input_free_device(s3_wmi.input);
> + return error;
> +}
> +
> +static int __init s3_wmi_probe(struct platform_device *pdev)
> +{
> + int error;
> +
> + if (!dmi_check_system(surface3_dmi_table))
> + return -ENODEV;
> +
> + memset(&s3_wmi, 0, sizeof(s3_wmi));
> +
> + bus_for_each_dev(&platform_bus_type, NULL, NULL,
> + s3_wmi_check_platform_device);
> +
> + if (!s3_wmi.touchscreen_adev)
> + return -ENODEV;
> +
> + acpi_bus_trim(s3_wmi.pnp0c0d_adev);
> +
> + error = s3_wmi_create_and_register_input(pdev);
> + if (error)
> + goto restore_acpi_lid;
> +
> + acpi_initialize_hp_context(s3_wmi.touchscreen_adev, &s3_wmi.hp,
> + s3_wmi_hp_notify, NULL);
> +
> + s3_wmi_send_lid_state();
> +
> + return 0;
> +
> + restore_acpi_lid:
> + acpi_bus_scan(s3_wmi.pnp0c0d_adev->handle);
> + return error;
> +}
> +
> +static int s3_wmi_remove(struct platform_device *device)
> +{
> + /* remove the hotplug context from the acpi device */
> + s3_wmi.touchscreen_adev->hp = NULL;
> +
> + /* reinstall the actual PNPC0C0D LID default handle */
> + acpi_bus_scan(s3_wmi.pnp0c0d_adev->handle);
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int s3_wmi_resume(struct device *dev)
> +{
> + s3_wmi_send_lid_state();
> + return 0;
> +}
> +#endif
> +static SIMPLE_DEV_PM_OPS(s3_wmi_pm, NULL, s3_wmi_resume);
> +
> +static struct platform_driver s3_wmi_driver = {
> + .driver = {
> + .name = "surface3-wmi",
> + .pm = &s3_wmi_pm,
> + },
> + .remove = s3_wmi_remove,
> +};
> +
> +static int __init s3_wmi_init(void)
> +{
> + int error;
> +
> + s3_wmi_pdev = platform_device_alloc("surface3-wmi", -1);
> + if (!s3_wmi_pdev)
> + return -ENOMEM;
> +
> + error = platform_device_add(s3_wmi_pdev);
> + if (error)
> + goto err_device_put;
> +
> + error = platform_driver_probe(&s3_wmi_driver, s3_wmi_probe);
> + if (error)
> + goto err_device_del;
> +
> + pr_info("Surface 3 WMI Extras loaded\n");
> + return 0;
> +
> + err_device_del:
> + platform_device_del(s3_wmi_pdev);
> + err_device_put:
> + platform_device_put(s3_wmi_pdev);
> + return error;
> +}
> +
> +static void __exit s3_wmi_exit(void)
> +{
> + platform_device_unregister(s3_wmi_pdev);
> + platform_driver_unregister(&s3_wmi_driver);
> +}
> +
> +module_init(s3_wmi_init);
> +module_exit(s3_wmi_exit);
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists