[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20161214231237.17496-7-sebastien.bourdelin@savoirfairelinux.com>
Date: Wed, 14 Dec 2016 18:12:36 -0500
From: Sebastien Bourdelin <sebastien.bourdelin@...oirfairelinux.com>
To: linux-kernel@...r.kernel.org, linux-watchdog@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
kernel@...oirfairelinux.com
Cc: mark@...eddedarm.com, kris@...eddedarm.com,
horms+renesas@...ge.net.au, treding@...dia.com,
jonathanh@...dia.com, f.fainelli@...il.com, fabio.estevam@....com,
kernel@...gutronix.de, shawnguo@...nel.org, linux@...linux.org.uk,
linux@...ck-us.net, wim@...ana.be, mark.rutland@....com,
robh+dt@...nel.org, damien.riegel@...oirfairelinux.com,
lucile.quirion@...oirfairelinux.com, olof@...om.net, arnd@...db.de,
suzuki.poulose@....com, linus.walleij@...aro.org,
will.deacon@....com, yamada.masahiro@...ionext.com,
Sebastien Bourdelin <sebastien.bourdelin@...oirfairelinux.com>
Subject: [PATCH 6/6] watchdog: ts4600: add driver for TS-4600 watchdog
This watchdog is instantiated in a FPGA and can only be access using a
GPIOs bit-banged bus, called the NBUS by Technologic Systems.
The watchdog is made of only one register, called the feed register.
Writing to this register will re-arm the watchdog for a given time (and
enable it if it was disable). It can be disabled by writing a special
value into it.
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@...oirfairelinux.com>
---
.../devicetree/bindings/watchdog/ts4600-wdt.txt | 16 ++
arch/arm/boot/dts/imx28-ts4600-common.dtsi | 5 +
drivers/watchdog/Kconfig | 10 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/ts4600_wdt.c | 213 +++++++++++++++++++++
5 files changed, 245 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/ts4600-wdt.txt
create mode 100644 drivers/watchdog/ts4600_wdt.c
diff --git a/Documentation/devicetree/bindings/watchdog/ts4600-wdt.txt b/Documentation/devicetree/bindings/watchdog/ts4600-wdt.txt
new file mode 100644
index 0000000..61d620e
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/ts4600-wdt.txt
@@ -0,0 +1,16 @@
+TS-4600 Technologic Systems Watchdog
+
+Required properties:
+- compatible: must be "technologic,ts4600-wdt"
+- reg: offset to the FPGA's watchdog register
+
+Optional property:
+- timeout-sec: contains the watchdog timeout in seconds.
+
+Example:
+
+wdt {
+ compatible = "technologic,ts4600-wdt";
+ reg = <0x2a>;
+ timeout-sec = <10>;
+};
diff --git a/arch/arm/boot/dts/imx28-ts4600-common.dtsi b/arch/arm/boot/dts/imx28-ts4600-common.dtsi
index b668933..dd7318c 100644
--- a/arch/arm/boot/dts/imx28-ts4600-common.dtsi
+++ b/arch/arm/boot/dts/imx28-ts4600-common.dtsi
@@ -116,6 +116,11 @@
strobe-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
ale-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
rdy-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+
+ wdt@2a {
+ compatible = "technologic,ts4600-wdt";
+ reg = <0x2a>;
+ };
};
};
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3eb58cb..7a8e176 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -500,6 +500,16 @@ config NUC900_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called nuc900_wdt.
+config TS4600_WATCHDOG
+ tristate "TS-4600 Watchdog"
+ depends on HAS_IOMEM && OF
+ depends on SOC_IMX28 || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Technologic Systems TS-4600 has watchdog timer implemented in
+ an external FPGA. Say Y here if you want to support for the
+ watchdog timer on TS-4600 board.
+
config TS4800_WATCHDOG
tristate "TS-4800 Watchdog"
depends on HAS_IOMEM && OF
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index caa9f4a..d4b4bd2 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o
obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o
obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
+obj-$(CONFIG_TS4600_WATCHDOG) += ts4600_wdt.o
obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
diff --git a/drivers/watchdog/ts4600_wdt.c b/drivers/watchdog/ts4600_wdt.c
new file mode 100644
index 0000000..db91b40
--- /dev/null
+++ b/drivers/watchdog/ts4600_wdt.c
@@ -0,0 +1,213 @@
+/*
+ * Watchdog driver for TS-4600 based boards
+ *
+ * Copyright (c) 2016 - Savoir-faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourdelin@...oirfairelinux.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The watchdog on the TS-4600 based boards is in an FPGA and can only be
+ * accessed using a GPIO bit-banged bus called the NBUS by Technologic Systems.
+ * The logic for the watchdog is the same then for the TS-4800 SoM, only the way
+ * to access it change, therefore this driver is heavely based on the ts4800_wdt
+ * driver from Damien Riegel <damien.riegel@...oirfairelinux.com>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/ts-nbus.h>
+#include <linux/watchdog.h>
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/* possible feed values */
+#define TS4600_WDT_FEED_2S 0x1
+#define TS4600_WDT_FEED_10S 0x2
+#define TS4600_WDT_DISABLE 0x3
+
+struct ts4600_wdt {
+ struct watchdog_device wdd;
+ u32 feed_offset;
+ u32 feed_val;
+};
+
+/*
+ * TS-4600 supports the following timeout values:
+ *
+ * value desc
+ * ---------------------
+ * 0 feed for 338ms
+ * 1 feed for 2.706s
+ * 2 feed for 10.824s
+ * 3 disable watchdog
+ *
+ * Keep the regmap/timeout map ordered by timeout
+ */
+static const struct {
+ const int timeout;
+ const int regval;
+} ts4600_wdt_map[] = {
+ { 2, TS4600_WDT_FEED_2S },
+ { 10, TS4600_WDT_FEED_10S },
+};
+
+#define MAX_TIMEOUT_INDEX (ARRAY_SIZE(ts4600_wdt_map) - 1)
+
+static void ts4600_write_feed(struct ts4600_wdt *wdt, u32 val)
+{
+ ts_nbus_write(wdt->feed_offset, val);
+}
+
+static int ts4600_wdt_start(struct watchdog_device *wdd)
+{
+ struct ts4600_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ ts4600_write_feed(wdt, wdt->feed_val);
+
+ return 0;
+}
+
+static int ts4600_wdt_stop(struct watchdog_device *wdd)
+{
+ struct ts4600_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ ts4600_write_feed(wdt, TS4600_WDT_DISABLE);
+ return 0;
+}
+
+static int ts4600_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ struct ts4600_wdt *wdt = watchdog_get_drvdata(wdd);
+ int i;
+
+ for (i = 0; i < MAX_TIMEOUT_INDEX; i++) {
+ if (ts4600_wdt_map[i].timeout >= timeout)
+ break;
+ }
+
+ wdd->timeout = ts4600_wdt_map[i].timeout;
+ wdt->feed_val = ts4600_wdt_map[i].regval;
+
+ return 0;
+}
+
+static const struct watchdog_ops ts4600_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = ts4600_wdt_start,
+ .stop = ts4600_wdt_stop,
+ .set_timeout = ts4600_wdt_set_timeout,
+};
+
+static const struct watchdog_info ts4600_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+ .identity = "TS-4600 Watchdog",
+};
+
+static int ts4600_wdt_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct watchdog_device *wdd;
+ struct ts4600_wdt *wdt;
+ u32 reg;
+ int ret;
+
+ ret = of_property_read_u32(np, "reg", ®);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "missing reg property\n");
+ return ret;
+ }
+
+ /* check for the NBUS state and defer the probing if it is not ready */
+ if (!ts_nbus_is_ready())
+ return -EPROBE_DEFER;
+
+ /* allocate memory for watchdog struct */
+ wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ /* set offset to know where to write */
+ wdt->feed_offset = reg;
+
+ /* Initialize struct watchdog_device */
+ wdd = &wdt->wdd;
+ wdd->parent = &pdev->dev;
+ wdd->info = &ts4600_wdt_info;
+ wdd->ops = &ts4600_wdt_ops;
+ wdd->min_timeout = ts4600_wdt_map[0].timeout;
+ wdd->max_timeout = ts4600_wdt_map[MAX_TIMEOUT_INDEX].timeout;
+
+ watchdog_set_drvdata(wdd, wdt);
+ watchdog_set_nowayout(wdd, nowayout);
+ watchdog_init_timeout(wdd, 0, &pdev->dev);
+
+ /*
+ * As this watchdog supports only a few values, ts4600_wdt_set_timeout
+ * must be called to initialize timeout and feed_val with valid values.
+ * Default to maximum timeout if none, or an invalid one, is provided in
+ * device tree.
+ */
+ if (!wdd->timeout)
+ wdd->timeout = wdd->max_timeout;
+ ts4600_wdt_set_timeout(wdd, wdd->timeout);
+
+ /*
+ * The feed register is write-only, so it is not possible to determine
+ * watchdog's state. Disable it to be in a known state.
+ */
+ ts4600_wdt_stop(wdd);
+
+ ret = watchdog_register_device(wdd);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to register watchdog device\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, wdt);
+
+ dev_info(&pdev->dev,
+ "initialized (timeout = %d sec, nowayout = %d)\n",
+ wdd->timeout, nowayout);
+
+ return 0;
+}
+
+static int ts4600_wdt_remove(struct platform_device *pdev)
+{
+ struct ts4600_wdt *wdt = platform_get_drvdata(pdev);
+
+ watchdog_unregister_device(&wdt->wdd);
+
+ return 0;
+}
+
+static const struct of_device_id ts4600_wdt_of_match[] = {
+ { .compatible = "technologic,ts4600-wdt", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ts4600_wdt_of_match);
+
+static struct platform_driver ts4600_wdt_driver = {
+ .probe = ts4600_wdt_probe,
+ .remove = ts4600_wdt_remove,
+ .driver = {
+ .name = "ts4600_wdt",
+ .of_match_table = ts4600_wdt_of_match,
+ },
+};
+
+module_platform_driver(ts4600_wdt_driver);
+
+MODULE_AUTHOR("Sebastien Bourdelin <sebastien.bourdelin@...oirfairelinux.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ts4600_wdt");
--
2.10.2
Powered by blists - more mailing lists