| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0a0c9237-3e67-bf84-8f32-ef3a49827d0b@fivetechno.de>
Date: Thu, 15 Dec 2016 14:55:43 +0100
From: Markus Reichl <m.reichl@...etechno.de>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Krzysztof Kozlowski <krzk@...nel.org>
Cc: Kukjin Kim <kgene@...nel.org>,
Javier Martinez Canillas <javier@....samsung.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
Doug Anderson <dianders@...omium.org>,
Andreas Faerber <afaerber@...e.de>,
Thomas Abraham <thomas.ab@...sung.com>,
Ben Gamari <ben@...rt-cactus.org>,
Arjun K V <arjun.kv@...sung.com>,
linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] ARM: dts: Add missing CPU frequencies for
Exynos5422/5800
Hi Bartlomiej,
Am 15.12.2016 um 12:55 schrieb Bartlomiej Zolnierkiewicz:
> Add missing 2000MHz & 1900MHz OPPs (for A15 cores) and 1400MHz OPP
> (for A7 cores). Also update common Odroid-XU3 Lite/XU3/XU4 thermal
> cooling maps to account for new OPPs.
>
> Since new OPPs are not available on all Exynos5422/5800 boards modify
> dts files for Odroid-XU3 Lite (limited to 1.8 GHz / 1.3 GHz) & Peach
> Pi (limited to 2.0 GHz / 1.3 GHz) accordingly.
>
> Tested on Odroid-XU3 and XU3 Lite.
>
> Cc: Doug Anderson <dianders@...omium.org>
> Cc: Javier Martinez Canillas <javier@....samsung.com>
> Cc: Andreas Faerber <afaerber@...e.de>
> Cc: Thomas Abraham <thomas.ab@...sung.com>
> Cc: Ben Gamari <ben@...rt-cactus.org>
> Cc: Arjun K V <arjun.kv@...sung.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
> ---
> v2:
> - added comments about limitations of SoC revisions used by Odroid-XU3 Lite and
> Peach Pi boards (suggested by Javier)
> - removed redundant opp_a7_14 label
> - added Arjun to Cc:
>
> Javier, could you test it on Peach Pi board?
>
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 14 ++++++-------
> arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 22 +++++++++++++++++++++
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 9 ++++++++
> arch/arm/boot/dts/exynos5800.dtsi | 15 ++++++++++++++
> 4 files changed, 53 insertions(+), 7 deletions(-)
>
> Index: b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> ===================================================================
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi 2016-12-15 12:43:54.365955950 +0100
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi 2016-12-15 12:43:54.361955949 +0100
> @@ -118,7 +118,7 @@
> /*
> * When reaching cpu_alert3, reduce CPU
> * by 2 steps. On Exynos5422/5800 that would
> - * be: 1600 MHz and 1100 MHz.
> + * (usually) be: 1800 MHz and 1200 MHz.
> */
> map3 {
> trip = <&cpu_alert3>;
> @@ -131,16 +131,16 @@
>
> /*
> * When reaching cpu_alert4, reduce CPU
> - * further, down to 600 MHz (11 steps for big,
> - * 7 steps for LITTLE).
> + * further, down to 600 MHz (13 steps for big,
> + * 8 steps for LITTLE).
> */
> - map5 {
> + cooling_map5: map5 {
> trip = <&cpu_alert4>;
> - cooling-device = <&cpu0 3 7>;
> + cooling-device = <&cpu0 3 8>;
> };
> - map6 {
> + cooling_map6: map6 {
> trip = <&cpu_alert4>;
> - cooling-device = <&cpu4 3 11>;
> + cooling-device = <&cpu4 3 13>;
> };
> };
> };
> Index: b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
> ===================================================================
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts 2016-12-15 12:43:54.365955950 +0100
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts 2016-12-15 12:43:54.361955949 +0100
> @@ -21,6 +21,28 @@
> compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
> };
>
> +/*
> + * Odroid XU3-Lite board uses SoC revision with lower maximum frequencies
> + * than Odroid XU3/XU4 boards: 1.8 GHz for A15 cores & 1.3 GHz for A7 cores.
> + * Therefore we need to update OPPs tables and thermal maps accordingly.
> + */
> +&cluster_a15_opp_table {
> + /delete-node/opp@...0000000;
> + /delete-node/opp@...0000000;
> +};
> +
> +&cluster_a7_opp_table {
> + /delete-node/opp@...0000000;
> +};
> +
> +&cooling_map5 {
> + cooling-device = <&cpu0 3 7>;
> +};
> +
> +&cooling_map6 {
> + cooling-device = <&cpu4 3 11>;
> +};
> +
> &pwm {
> /*
> * PWM 0 -- fan
> Index: b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> ===================================================================
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts 2016-12-15 12:43:54.365955950 +0100
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts 2016-12-15 12:43:54.361955949 +0100
> @@ -146,6 +146,15 @@
> vdd-supply = <&ldo9_reg>;
> };
>
> +/*
> + * Peach Pi board uses SoC revision with lower maximum frequency for A7 cores
> + * (1.3 GHz instead of 1.4 GHz) than Odroid XU3/XU4 boards. Thus we need to
> + * update A7 OPPs table accordingly.
> + */
> +&cluster_a7_opp_table {
> + /delete-property/opp@...0000000;
> +};
> +
> &cpu0 {
> cpu-supply = <&buck2_reg>;
> };
> Index: b/arch/arm/boot/dts/exynos5800.dtsi
> ===================================================================
> --- a/arch/arm/boot/dts/exynos5800.dtsi 2016-12-15 12:43:54.365955950 +0100
> +++ b/arch/arm/boot/dts/exynos5800.dtsi 2016-12-15 12:43:54.361955949 +0100
> @@ -24,6 +24,16 @@
> };
>
> &cluster_a15_opp_table {
> + opp@...0000000 {
> + opp-hz = /bits/ 64 <2000000000>;
> + opp-microvolt = <1250000>;
> + clock-latency-ns = <140000>;
> + };
> + opp@...0000000 {
> + opp-hz = /bits/ 64 <1900000000>;
> + opp-microvolt = <1250000>;
> + clock-latency-ns = <140000>;
> + };
> opp@...0000000 {
> opp-microvolt = <1250000>;
> };
> @@ -85,6 +95,11 @@
> };
>
> &cluster_a7_opp_table {
> + opp@...0000000 {
> + opp-hz = /bits/ 64 <1400000000>;
> + opp-microvolt = <1250000>;
> + clock-latency-ns = <140000>;
> + };
> opp@...0000000 {
> opp-microvolt = <1250000>;
> };
>
On Odroid XU4, XU3 and XU3-lite:
Tested-by: Markus Reichl <m.reichl@...etechno.de>
Thanks,
--
Markus Reichl
Powered by blists - more mailing lists