linux-kernel - Re: [PATCH v3 2/2] dt-bindings: power: add bindings for sbs-charger

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20161217163212.bwjxxeiqw5eklhoc@earth>
Date:   Sat, 17 Dec 2016 17:32:12 +0100
From:   Sebastian Reichel <sre@...nel.org>
To:     Nicolas Saenz Julienne <nicolas.saenz@...dys.net>
Cc:     robh+dt@...nel.org, mark.rutland@....com,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-pm@...r.kernel.org
Subject: Re: [PATCH v3 2/2] dt-bindings: power: add bindings for sbs-charger

Hi,

On Thu, Nov 24, 2016 at 01:33:43PM +0100, Nicolas Saenz Julienne wrote:
> Adds device tree documentation for SBS charger compilant devices as defined
> here: http://sbs-forum.org/specs/sbc110.pdf
> 
> Signed-off-by: Nicolas Saenz Julienne <nicolas.saenz@...dys.net>
> ---
> v2 -> v3:
> - add part number as compatible
> 
>  .../bindings/power/supply/sbs_sbs-charger.txt      | 24 ++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
> new file mode 100644
> index 0000000..f6b6027
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
> @@ -0,0 +1,24 @@
> +SBS sbs-charger
> +~~~~~~~~~~
> +
> +Required properties:
> + - compatible: should contain one of the following:
> +	- "lltc,ltc4100"
> +	- "sbs,sbs-charger"

That's not what I meant. The idea is to specify "lltc,ltc4100" with
"sbs,sbs-charger" as fallback. Then the driver for now only handles
"sbs,sbs-charger", but if any vendor registers need to be supported
we have a more specific compatible value in DT, that can be used to
identify the device.

> +Optional properties:
> +- interrupt-parent: Should be the phandle for the interrupt controller. Use in
> +    conjunction with "interrupts".
> +- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
> +    "interrupt-parent". If an interrupt is not provided the driver will switch
> +    automatically to polling.
> +
> +Example:
> +
> +	ltc4100@9 {
> +		compatible = "sbs,sbs-charger";
> +		reg = <0x9>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +	};

So the example would look like

compatible = "lltc,ltc4100", "sbs,sbs-charger";

-- Sebastian

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)