linux-kernel - Re: [PATCH v2] ARM: dts: sun8i: add opp-v2 table for A33

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20161219084652.kiqdkiewu5tujlyd@lukather>
Date:   Mon, 19 Dec 2016 09:46:52 +0100
From:   Maxime Ripard <maxime.ripard@...e-electrons.com>
To:     Icenowy Zheng <icenowy@...c.xyz>
Cc:     Chen-Yu Tsai <wens@...e.org>, Hans de Goede <hdegoede@...hat.com>,
        Quentin Schulz <quentin.schulz@...e-electrons.com>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-sunxi@...glegroups.com
Subject: Re: [PATCH v2] ARM: dts: sun8i: add opp-v2 table for A33

On Fri, Dec 16, 2016 at 02:27:54AM +0800, Icenowy Zheng wrote:
> An operating point table is needed for the cpu frequency adjusting to
> work.
> 
> The operating point table is converted from the common value in
> extracted script.fex from many A33 board/tablets.
> 
> Signed-off-by: Icenowy Zheng <icenowy@...c.xyz>
> ---
> Changes since v1:
> - Fix format problem (blank lines).
> - Removed the 1.344GHz operating point, as it's overvoltage and overclocked.
> 
> This patch depends on the following patchset:
> 
> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-December/473962.html
> 
> It's the v2 of the [PATCH 4/6] in this patchset.
> 
> I think this operating point table may also apply to A23, as there's no
> difference except the points over 1.2GHz between A23 and A33's stock dvfs table.
> 
> But as A23 CCU may not have the necessary fixes, I won't add the table to A23
> now.
> 
> Chen-Yu, could you test the CCU fixes I described in the patchset above on A23,
> then test this operating points table?
> 
> If it's necessary, you can send out the CCU fixes and add one more patch that
> moves this opp-v2 table to sun8i-a23-a33.dtsi .
> 
>  arch/arm/boot/dts/sun8i-a33.dtsi | 35 +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
> index 504996cbee29..0f5b2af72981 100644
> --- a/arch/arm/boot/dts/sun8i-a33.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a33.dtsi
> @@ -46,7 +46,42 @@
>  #include <dt-bindings/dma/sun4i-a10.h>
>  
>  / {
> +	cpu0_opp_table: opp_table0 {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp@...000000 {
> +			opp-hz = /bits/ 64 <648000000>;
> +			opp-microvolt = <1040000>;
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +		};
> +
> +		opp@...000000 {
> +			opp-hz = /bits/ 64 <816000000>;
> +			opp-microvolt = <1100000>;
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +		};
> +
> +		opp@...8000000 {
> +			opp-hz = /bits/ 64 <1008000000>;
> +			opp-microvolt = <1200000>;
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +		};
> +
> +		opp@...0000000 {
> +			opp-hz = /bits/ 64 <1200000000>;
> +			opp-microvolt = <1320000>;
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +		};
> +	};
> +
>  	cpus {
> +		cpu0: cpu@0 {

There's no need to duplicate the label here. I removed it and applied.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)