[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <83861482169482@web2o.yandex.ru>
Date: Mon, 19 Dec 2016 19:44:42 +0200
From: Ozgur Karatas <okaratas@...ber.fsf.org>
To: Greg KH <gregkh@...uxfoundation.org>,
Scott Matheina <scott@...heina.com>
Cc: "thomas.petazzoni@...e-electrons.com"
<thomas.petazzoni@...e-electrons.com>,
"noralf@...nnes.org" <noralf@...nnes.org>,
"devel@...verdev.osuosl.org" <devel@...verdev.osuosl.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] drivers: staging: fbtft: fix checkpatch error and udelay
19.12.2016, 08:35, "Greg KH" <gregkh@...uxfoundation.org>:
> On Sun, Dec 18, 2016 at 11:47:30AM -0600, Scott Matheina wrote:
>> These changes where identified by checkpatch.pl as needed changes to
>> align the code with the linux development coding style. The several
>> lines of text where aligned with the precending parenthesis.
>>
>> Signed-off-by: Scott Matheina <scott@...heina.com>
>>
>> Changes to be committed:
>> modified: drivers/staging/fbtft/fb_agm1264k-fl.c
>
> Why are these lines in the changelog text?
I checked with checkpatch script to code and give a some errors.
So, the code have to "udelay(20)".
udelay(20);
I read to Documentation/timers/timers-howto.txt and
this line incorrect, usleep_range need must be add defined U_DELAY and fixed.
udelay(U_DELAY, U_DELAY + 10);
finally:
$ checkpatch.pl drivers/staging/fbtft/fb_agm1264k-fl.c | grep total
total: 0 errors
Signed-off-by: Ozgur Karatas <okaratas@...ber.fsf.org>
---
drivers/staging/fbtft/fb_agm1264k-fl.c | 31 ++++++++++++-------------------
1 file changed, 12 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/fbtft/fb_agm1264k-fl.c b/drivers/staging/fbtft/fb_agm1264k-fl.c
index 7561385..2d46d03 100644
--- a/drivers/staging/fbtft/fb_agm1264k-fl.c
+++ b/drivers/staging/fbtft/fb_agm1264k-fl.c
@@ -36,10 +36,11 @@
#define FPS 20
#define EPIN gpio.wr
-#define RS gpio.dc
-#define RW gpio.aux[2]
-#define CS0 gpio.aux[0]
-#define CS1 gpio.aux[1]
+#define RS gpio.dc
+#define RW gpio.aux[2]
+#define CS0 gpio.aux[0]
+#define CS1 gpio.aux[1]
+#define U_DELAY
/* diffusing error (Floyd-Steinberg) */
#define DIFFUSING_MATRIX_WIDTH 2
@@ -94,7 +95,7 @@ static void reset(struct fbtft_par *par)
dev_dbg(par->info->device, "%s()\n", __func__);
gpio_set_value(par->gpio.reset, 0);
- udelay(20);
+ udelay(U_DELAY, U_DELAY + 10);
gpio_set_value(par->gpio.reset, 1);
mdelay(120);
}
@@ -185,8 +186,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
buf[i] = (u8)va_arg(args, unsigned int);
va_end(args);
- fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par,
- par->info->device, u8, buf, len, "%s: ", __func__);
+ fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par, par->info->device, u8, buf, len, "%s: ", __func__);
}
va_start(args, len);
@@ -245,8 +245,7 @@ static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
}
static void
-construct_line_bitmap(struct fbtft_par *par, u8 *dest, signed short *src,
- int xs, int xe, int y)
+construct_line_bitmap(struct fbtft_par *par, u8 *dest, signed short *src, int xs, int xe, int y)
{
int x, i;
@@ -326,9 +325,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
signed char coeff;
/* skip pixels out of zone */
- if (x + i < 0 ||
- x + i >= par->info->var.xres
- || y + j >= par->info->var.yres)
+ if (x + i < 0 || x + i >= par->info->var.xres || y + j >= par->info->var.yres)
continue;
write_pos = &convert_buf[
(y + j) * par->info->var.xres +
@@ -354,8 +351,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
for (y = addr_win.ys_page; y <= addr_win.ye_page; ++y) {
/* left half of display */
if (addr_win.xs < par->info->var.xres / 2) {
- construct_line_bitmap(par, buf, convert_buf,
- addr_win.xs, par->info->var.xres / 2, y);
+ construct_line_bitmap(par, buf, convert_buf, addr_win.xs, par->info->var.xres / 2, y);
len = par->info->var.xres / 2 - addr_win.xs;
@@ -375,9 +371,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
}
/* right half of display */
if (addr_win.xe >= par->info->var.xres / 2) {
- construct_line_bitmap(par, buf,
- convert_buf, par->info->var.xres / 2,
- addr_win.xe + 1, y);
+ construct_line_bitmap(par, buf, convert_buf, par->info->var.xres / 2, addr_win.xe + 1, y);
len = addr_win.xe + 1 - par->info->var.xres / 2;
@@ -406,8 +400,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
static int write(struct fbtft_par *par, void *buf, size_t len)
{
- fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
- "%s(len=%d): ", __func__, len);
+ fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len, "%s(len=%d): ", __func__, len);
gpio_set_value(par->RW, 0); /* set write mode */
--
2.1.4
Powered by blists - more mailing lists