| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f5cda4a7-8c41-86b7-b133-cf41eaec0370@axis.com>
Date: Tue, 20 Dec 2016 15:43:52 +0100
From: Niklas Cassel <niklas.cassel@...s.com>
To: Joao Pinto <Joao.Pinto@...opsys.com>, <peppe.cavallaro@...com>,
<davem@...emloft.net>
CC: <hock.leong.kweh@...el.com>, <pavel@....cz>,
<linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
Subject: Re: [PATCH] stmmac: enable rx queues
On 12/20/2016 01:55 PM, Joao Pinto wrote:
> When the hardware is synthesized with multiple queues, all queues are
> disabled for default. This patch adds the rx queues configuration.
> This patch was successfully tested in a Synopsys QoS Reference design.
>
> Signed-off-by: Joao Pinto <jpinto@...opsys.com>
> ---
> drivers/net/ethernet/stmicro/stmmac/common.h | 2 ++
> drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 4 ++++
> drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 11 +++++++++++
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 21 +++++++++++++++++++++
> 4 files changed, 38 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
> index b13a144..61bab50 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
> @@ -454,6 +454,8 @@ struct stmmac_ops {
> void (*core_init)(struct mac_device_info *hw, int mtu);
> /* Enable and verify that the IPC module is supported */
> int (*rx_ipc)(struct mac_device_info *hw);
> + /* Enable RX Queues */
> + void (*rx_queue_enable)(struct mac_device_info *hw, u32 queue);
> /* Dump MAC registers */
> void (*dump_regs)(struct mac_device_info *hw);
> /* Handle extra events on specific interrupts hw dependent */
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
> index 3e8d4fe..fd013bd 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
> @@ -22,6 +22,7 @@
> #define GMAC_HASH_TAB_32_63 0x00000014
> #define GMAC_RX_FLOW_CTRL 0x00000090
> #define GMAC_QX_TX_FLOW_CTRL(x) (0x70 + x * 4)
> +#define GMAC_RXQ_CTRL0 0x000000a0
> #define GMAC_INT_STATUS 0x000000b0
> #define GMAC_INT_EN 0x000000b4
> #define GMAC_PCS_BASE 0x000000e0
> @@ -44,6 +45,9 @@
>
> #define GMAC_MAX_PERFECT_ADDRESSES 128
>
> +/* MAC RX Queue Enable*/
> +#define GMAC_RX_QUEUE_ENABLE(queue) BIT(queue * 2)
Always have parentheses around a variable in a
macro, otherwise strange things could happen.
Imagine if you send 5 - 4 as argument,
it will then expand to 5 - 4 * 2 = -3,
instead of (5 - 4) * 2 = 2
> +
> /* MAC Flow Control RX */
> #define GMAC_RX_FLOW_CTRL_RFE BIT(0)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> index eaed7cb..7ec1887 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> @@ -59,6 +59,16 @@ static void dwmac4_core_init(struct mac_device_info *hw, int mtu)
> writel(value, ioaddr + GMAC_INT_EN);
> }
>
> +static void dwmac4_rx_queue_enable(struct mac_device_info *hw, u32 queue)
> +{
> + void __iomem *ioaddr = hw->pcsr;
> + u32 value = readl(ioaddr + GMAC_RXQ_CTRL0);
> +
> + value |= GMAC_RX_QUEUE_ENABLE(queue);
> +
> + writel(value, ioaddr + GMAC_RXQ_CTRL0);
> +}
> +
> static void dwmac4_dump_regs(struct mac_device_info *hw)
> {
> void __iomem *ioaddr = hw->pcsr;
> @@ -392,6 +402,7 @@ static void dwmac4_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x)
> static const struct stmmac_ops dwmac4_ops = {
> .core_init = dwmac4_core_init,
> .rx_ipc = dwmac4_rx_ipc_enable,
> + .rx_queue_enable = dwmac4_rx_queue_enable,
> .dump_regs = dwmac4_dump_regs,
> .host_irq_status = dwmac4_irq_status,
> .flow_ctrl = dwmac4_flow_ctrl,
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 3e40578..e30034d 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -1271,6 +1271,24 @@ static void free_dma_desc_resources(struct stmmac_priv *priv)
> }
>
> /**
> + * stmmac_mac_enable_rx_queues - Enable MAC rx queues
> + * @priv: driver private structure
> + * Description: It is used for enabling the rx queues in the MAC
> + */
> +static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv)
> +{
> + int rx_count = priv->dma_cap.number_rx_channel;
priv->dma_cap.number_rx_channel
actually contains the value from register
MAC_HW_Feature2, field RXCHCNT,
which is the number of DMA rx channels.
This is not the same as the number of MTL
receive queues, field RXQCNT in MAC_HW_Feature2.
I guess they will often have the same value,
but since there actually are two different fields
for them, I suppose that is not always the case.
Reading the comments in dwmac4_dma.*
#define DMA_CHANNEL_NB_MAX 1
"Only Channel 0 is actually configured and used"
"Following code only done for channel 0, other channels not yet supported"
Is there any point in actually enabling more than RX queue 0 if the
driver does not yet support more than one channel.
Can RXCHCNT ever be different from RXQCNT?
If so, when? Maybe when using an external DMA IP?
> + int queue = 0;
> +
> + /* If GMAC does not have multiqueues, then this is not necessary*/
> + if (rx_count == 1)
> + return;
> +
> + for (queue = 0; queue < rx_count; queue++)
> + priv->hw->mac->rx_queue_enable(priv->hw, queue);
> +}
> +
> +/**
> * stmmac_dma_operation_mode - HW DMA operation mode
> * @priv: driver private structure
> * Description: it is used for configuring the DMA operation mode register in
> @@ -1691,6 +1709,9 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
> /* Initialize the MAC Core */
> priv->hw->mac->core_init(priv->hw, dev->mtu);
>
> + /* Initialize MAC RX Queues */
> + stmmac_mac_enable_rx_queues(priv);
> +
> ret = priv->hw->mac->rx_ipc(priv->hw);
> if (!ret) {
> netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
Powered by blists - more mailing lists