[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1482265384-715-4-git-send-email-david@lechnology.com>
Date: Tue, 20 Dec 2016 14:23:04 -0600
From: David Lechner <david@...hnology.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: David Lechner <david@...hnology.com>, Sekhar Nori <nsekhar@...com>,
Kevin Hilman <khilman@...nel.org>,
Axel Haslam <ahaslam@...libre.com>,
Alexandre Bailon <abailon@...libre.com>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Jiri Slaby <jslaby@...e.com>, linux-serial@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 3/3] ARM: da850: Add ti,da830-uart compatible for serial ports
TI DA8xx/OMAPL13x/AM17xx/AM18xx SoCs have extra UART registers beyond
the standard 8250 registers, so we need a new compatible string to
indicate this. Also, at least one of these registers uses the full 32
bits, so we need to specify reg-io-width in addition to reg-shift.
"ns16550a" is left in the compatible specification since it does work
as long as the bootloader configures the SoC UART power management
registers.
Signed-off-by: David Lechner <david@...hnology.com>
---
arch/arm/boot/dts/da850.dtsi | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 104155d..f6cd212 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -266,22 +266,25 @@
interrupt-names = "edm3_tcerrint";
};
serial0: serial@...00 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
reg = <0x42000 0x100>;
+ reg-io-width = <4>;
reg-shift = <2>;
interrupts = <25>;
status = "disabled";
};
serial1: serial@...000 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
reg = <0x10c000 0x100>;
+ reg-io-width = <4>;
reg-shift = <2>;
interrupts = <53>;
status = "disabled";
};
serial2: serial@...000 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
reg = <0x10d000 0x100>;
+ reg-io-width = <4>;
reg-shift = <2>;
interrupts = <61>;
status = "disabled";
--
2.7.4
Powered by blists - more mailing lists