[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1482316865-2769-1-git-send-email-zhengxing@rock-chips.com>
Date: Wed, 21 Dec 2016 18:41:05 +0800
From: Xing Zheng <zhengxing@...k-chips.com>
To: heiko@...ech.de, linux-rockchip@...ts.infradead.org
Cc: robh+dt@...nel.org, mark.rutland@....com, catalin.marinas@....com,
will.deacon@....com, dianders@...omium.org, wxt@...k-chips.com,
zhengxing@...k-chips.com, shawn.lin@...k-chips.com,
briannorris@...omium.org, jay.xu@...k-chips.com,
zhangqing@...k-chips.com, david.wu@...k-chips.com,
wulf@...k-chips.com, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
dianders@...gle.com, frank.wang@...k-chips.com
Subject: [RESEND PATCH v2] arm64: dts: rockchip: add u2phy clock for ehci and ohci of rk3399
From: William wu <wulf@...k-chips.com>
We found that the suspend process was blocked when it run into
ehci/ohci module due to clk-480m of usb2-phy was disabled.
The root cause is that usb2-phy suspended earlier than ehci/ohci
(usb2-phy will be auto suspended if no devices plug-in). and the
clk-480m provided by it was disabled if no module used. However,
some suspend process related ehci/ohci are base on this clock,
so we should refer it into ehci/ohci driver to prevent this case.
The u2phy clock flow like this:
===
u2phy ________________
| | |-----> UTMI_CLK ---------> | EHCI |
OSC_24M ---|---> PHY_PLL----|----|
|________^_______| |-----> 480M_CLK ---|G|---> | USBPHY_480M_SRC| ----> USBPHY_480M for SoC
|
|
GRF
===
Signed-off-by: William wu <wulf@...k-chips.com>
Signed-off-by: Xing Zheng <zhengxing@...k-chips.com>
---
Changes in v2:
- update the commit message
- remove patches whic add and export the USBPHYx_480M_SRC clock IDs
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index b65c193..2ad9255 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -315,8 +315,10 @@
compatible = "generic-ehci";
reg = <0x0 0xfe380000 0x0 0x20000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
- clock-names = "hclk_host0", "hclk_host0_arb";
+ clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
+ <&u2phy0>;
+ clock-names = "usbhost", "arbiter",
+ "utmi";
phys = <&u2phy0_host>;
phy-names = "usb";
status = "disabled";
@@ -326,8 +328,12 @@
compatible = "generic-ohci";
reg = <0x0 0xfe3a0000 0x0 0x20000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
- clock-names = "hclk_host0", "hclk_host0_arb";
+ clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
+ <&u2phy0>;
+ clock-names = "usbhost", "arbiter",
+ "utmi";
+ phys = <&u2phy0_host>;
+ phy-names = "usb";
status = "disabled";
};
@@ -335,8 +341,10 @@
compatible = "generic-ehci";
reg = <0x0 0xfe3c0000 0x0 0x20000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
- clock-names = "hclk_host1", "hclk_host1_arb";
+ clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
+ <&u2phy1>;
+ clock-names = "usbhost", "arbiter",
+ "utmi";
phys = <&u2phy1_host>;
phy-names = "usb";
status = "disabled";
@@ -346,8 +354,12 @@
compatible = "generic-ohci";
reg = <0x0 0xfe3e0000 0x0 0x20000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
- clock-names = "hclk_host1", "hclk_host1_arb";
+ clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
+ <&u2phy1>;
+ clock-names = "usbhost", "arbiter",
+ "utmi";
+ phys = <&u2phy1_host>;
+ phy-names = "usb";
status = "disabled";
};
--
2.7.4
Powered by blists - more mailing lists