[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20161221143657.322-12-hdegoede@redhat.com>
Date: Wed, 21 Dec 2016 15:36:56 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: Sebastian Reichel <sre@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>
Cc: linux-pm@...r.kernel.org,
"russianneuromancer @ ya . ru" <russianneuromancer@...ru>,
linux-kernel@...r.kernel.org, Hans de Goede <hdegoede@...hat.com>
Subject: [PATCH v2 11/12] power: supply: axp288_charger: Remove unnecessary irq?_en register writes
Setting the irq_enable bits is taken care of by the irq chip when we
request the irqs and the driver should not be meddling with the
irq?_en registers itself.
Signed-off-by: Hans de Goede <hdegoede@...hat.com>
---
drivers/power/supply/axp288_charger.c | 32 --------------------------------
1 file changed, 32 deletions(-)
diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c
index d3932cd..6e588e6 100644
--- a/drivers/power/supply/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c
@@ -90,20 +90,6 @@
#define CHRG_VLTFC_0C 0xA5 /* 0 DegC */
#define CHRG_VHTFC_45C 0x1F /* 45 DegC */
-#define BAT_IRQ_CFG_CHRG_DONE (1 << 2)
-#define BAT_IRQ_CFG_CHRG_START (1 << 3)
-#define BAT_IRQ_CFG_BAT_SAFE_EXIT (1 << 4)
-#define BAT_IRQ_CFG_BAT_SAFE_ENTER (1 << 5)
-#define BAT_IRQ_CFG_BAT_DISCON (1 << 6)
-#define BAT_IRQ_CFG_BAT_CONN (1 << 7)
-#define BAT_IRQ_CFG_BAT_MASK 0xFC
-
-#define TEMP_IRQ_CFG_QCBTU (1 << 4)
-#define TEMP_IRQ_CFG_CBTU (1 << 5)
-#define TEMP_IRQ_CFG_QCBTO (1 << 6)
-#define TEMP_IRQ_CFG_CBTO (1 << 7)
-#define TEMP_IRQ_CFG_MASK 0xF0
-
#define FG_CNTL_OCV_ADJ_EN (1 << 3)
#define CV_4100MV 4100 /* 4100mV */
@@ -713,24 +699,6 @@ static int charger_init_hw_regs(struct axp288_chrg_info *info)
return ret;
}
- /* Enable interrupts */
- ret = regmap_update_bits(info->regmap,
- AXP20X_IRQ2_EN,
- BAT_IRQ_CFG_BAT_MASK, 1);
- if (ret < 0) {
- dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
- AXP20X_IRQ2_EN, ret);
- return ret;
- }
-
- ret = regmap_update_bits(info->regmap, AXP20X_IRQ3_EN,
- TEMP_IRQ_CFG_MASK, 1);
- if (ret < 0) {
- dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
- AXP20X_IRQ3_EN, ret);
- return ret;
- }
-
/* Setup ending condition for charging to be 10% of I(chrg) */
ret = regmap_update_bits(info->regmap,
AXP20X_CHRG_CTRL1,
--
2.9.3
Powered by blists - more mailing lists