| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20161221064603.11830-12-fu.wei@linaro.org>
Date: Wed, 21 Dec 2016 14:45:59 +0800
From: fu.wei@...aro.org
To: rjw@...ysocki.net, lenb@...nel.org, daniel.lezcano@...aro.org,
tglx@...utronix.de, marc.zyngier@....com, mark.rutland@....com,
lorenzo.pieralisi@....com, sudeep.holla@....com,
hanjun.guo@...aro.org
Cc: linux-arm-kernel@...ts.infradead.org, linaro-acpi@...ts.linaro.org,
linux-kernel@...r.kernel.org, linux-acpi@...r.kernel.org,
rruigrok@...eaurora.org, harba@...eaurora.org, cov@...eaurora.org,
timur@...eaurora.org, graeme.gregory@...aro.org,
al.stone@...aro.org, jcm@...hat.com, wei@...hat.com, arnd@...db.de,
catalin.marinas@....com, will.deacon@....com,
Suravee.Suthikulpanit@....com, leo.duran@....com, wim@...ana.be,
linux@...ck-us.net, linux-watchdog@...r.kernel.org,
tn@...ihalf.com, christoffer.dall@...aro.org, julien.grall@....com,
Fu Wei <fu.wei@...aro.org>
Subject: [PATCH v19 11/15] acpi/arm64: Add GTDT table parse driver
From: Fu Wei <fu.wei@...aro.org>
This patch adds support for parsing arch timer info in GTDT,
provides some kernel APIs to parse all the PPIs and
always-on info in GTDT and export them.
By this driver, we can simplify arm_arch_timer drivers, and
separate the ACPI GTDT knowledge from it.
Signed-off-by: Fu Wei <fu.wei@...aro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@...aro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Tested-by: Xiongfeng Wang <wangxiongfeng2@...wei.com>
---
arch/arm64/Kconfig | 1 +
drivers/acpi/arm64/Kconfig | 3 +
drivers/acpi/arm64/Makefile | 1 +
drivers/acpi/arm64/gtdt.c | 157 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/acpi.h | 6 ++
5 files changed, 168 insertions(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1117421..ab1ee10 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -2,6 +2,7 @@ config ARM64
def_bool y
select ACPI_CCA_REQUIRED if ACPI
select ACPI_GENERIC_GSI if ACPI
+ select ACPI_GTDT if ACPI
select ACPI_REDUCED_HARDWARE_ONLY if ACPI
select ACPI_MCFG if ACPI
select ACPI_SPCR_TABLE if ACPI
diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
index 4616da4..5a6f80f 100644
--- a/drivers/acpi/arm64/Kconfig
+++ b/drivers/acpi/arm64/Kconfig
@@ -4,3 +4,6 @@
config ACPI_IORT
bool
+
+config ACPI_GTDT
+ bool
diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
index 72331f2..1017def 100644
--- a/drivers/acpi/arm64/Makefile
+++ b/drivers/acpi/arm64/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_ACPI_IORT) += iort.o
+obj-$(CONFIG_ACPI_GTDT) += gtdt.o
diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c
new file mode 100644
index 0000000..d93a790
--- /dev/null
+++ b/drivers/acpi/arm64/gtdt.c
@@ -0,0 +1,157 @@
+/*
+ * ARM Specific GTDT table Support
+ *
+ * Copyright (C) 2016, Linaro Ltd.
+ * Author: Daniel Lezcano <daniel.lezcano@...aro.org>
+ * Fu Wei <fu.wei@...aro.org>
+ * Hanjun Guo <hanjun.guo@...aro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <clocksource/arm_arch_timer.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "ACPI GTDT: " fmt
+
+/**
+ * struct acpi_gtdt_descriptor - Store the key info of GTDT for all functions
+ * @gtdt: The pointer to the struct acpi_table_gtdt of GTDT table.
+ * @gtdt_end: The pointer to the end of GTDT table.
+ * @platform_timer: The pointer to the start of Platform Timer Structure
+ *
+ * The struct store the key info of GTDT table, it should be initialized by
+ * acpi_gtdt_init.
+ */
+struct acpi_gtdt_descriptor {
+ struct acpi_table_gtdt *gtdt;
+ void *gtdt_end;
+ void *platform_timer;
+};
+
+static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata;
+
+static int __init map_gt_gsi(u32 interrupt, u32 flags)
+{
+ int trigger, polarity;
+
+ trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
+ : ACPI_LEVEL_SENSITIVE;
+
+ polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
+ : ACPI_ACTIVE_HIGH;
+
+ return acpi_register_gsi(NULL, interrupt, trigger, polarity);
+}
+
+/**
+ * acpi_gtdt_map_ppi() - Map the PPIs of per-cpu arch_timer.
+ * @type: the type of PPI.
+ *
+ * Note: Linux on arm64 isn't supported on the secure side.
+ * So we only handle the non-secure timer PPIs,
+ * ARCH_TIMER_PHYS_SECURE_PPI is treated as invalid type.
+ *
+ * Return: the mapped PPI value, 0 if error.
+ */
+int __init acpi_gtdt_map_ppi(int type)
+{
+ struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
+
+ switch (type) {
+ case ARCH_TIMER_PHYS_NONSECURE_PPI:
+ return map_gt_gsi(gtdt->non_secure_el1_interrupt,
+ gtdt->non_secure_el1_flags);
+ case ARCH_TIMER_VIRT_PPI:
+ return map_gt_gsi(gtdt->virtual_timer_interrupt,
+ gtdt->virtual_timer_flags);
+
+ case ARCH_TIMER_HYP_PPI:
+ return map_gt_gsi(gtdt->non_secure_el2_interrupt,
+ gtdt->non_secure_el2_flags);
+ default:
+ pr_err("Failed to map timer interrupt: invalid type.\n");
+ }
+
+ return 0;
+}
+
+/**
+ * acpi_gtdt_c3stop() - Got c3stop info from GTDT according to the type of PPI.
+ * @type: the type of PPI.
+ *
+ * Return: 1 if the timer can be in deep idle state, 0 otherwise.
+ */
+bool __init acpi_gtdt_c3stop(int type)
+{
+ struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
+
+ switch (type) {
+ case ARCH_TIMER_PHYS_NONSECURE_PPI:
+ return !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
+
+ case ARCH_TIMER_VIRT_PPI:
+ return !(gtdt->virtual_timer_flags & ACPI_GTDT_ALWAYS_ON);
+
+ case ARCH_TIMER_HYP_PPI:
+ return !(gtdt->non_secure_el2_flags & ACPI_GTDT_ALWAYS_ON);
+
+ default:
+ pr_err("Failed to get c3stop info: invalid type.\n");
+ }
+
+ return 0;
+}
+
+/**
+ * acpi_gtdt_init() - Get the info of GTDT table to prepare for further init.
+ * @table: The pointer to GTDT table.
+ * @platform_timer_count: The pointer of int variate for returning the
+ * number of platform timers. It can be NULL, if
+ * driver don't need this info.
+ *
+ * Return: 0 if success, -EINVAL if error.
+ */
+int __init acpi_gtdt_init(struct acpi_table_header *table,
+ int *platform_timer_count)
+{
+ int ret = 0;
+ int timer_count = 0;
+ void *platform_timer = NULL;
+ struct acpi_table_gtdt *gtdt;
+
+ gtdt = container_of(table, struct acpi_table_gtdt, header);
+ acpi_gtdt_desc.gtdt = gtdt;
+ acpi_gtdt_desc.gtdt_end = (void *)table + table->length;
+
+ if (table->revision < 2)
+ pr_debug("Revision:%d doesn't support Platform Timers.\n",
+ table->revision);
+ else if (!gtdt->platform_timer_count)
+ pr_debug("No Platform Timer.\n");
+ else
+ timer_count = gtdt->platform_timer_count;
+
+ if (timer_count) {
+ platform_timer = (void *)gtdt + gtdt->platform_timer_offset;
+ if (platform_timer < (void *)table +
+ sizeof(struct acpi_table_gtdt)) {
+ pr_err(FW_BUG "invalid timer data.\n");
+ timer_count = 0;
+ platform_timer = NULL;
+ ret = -EINVAL;
+ }
+ }
+
+ acpi_gtdt_desc.platform_timer = platform_timer;
+ if (platform_timer_count)
+ *platform_timer_count = timer_count;
+
+ return ret;
+}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 5b36974..d0b271e 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -597,6 +597,12 @@ enum acpi_reconfig_event {
int acpi_reconfig_notifier_register(struct notifier_block *nb);
int acpi_reconfig_notifier_unregister(struct notifier_block *nb);
+#ifdef CONFIG_ACPI_GTDT
+int acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count);
+int acpi_gtdt_map_ppi(int type);
+bool acpi_gtdt_c3stop(int type);
+#endif
+
#else /* !CONFIG_ACPI */
#define acpi_disabled 1
--
2.9.3
Powered by blists - more mailing lists