| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1482483135-14767-2-git-send-email-appanad@xilinx.com>
Date: Fri, 23 Dec 2016 14:22:13 +0530
From: Kedareswara rao Appana <appana.durga.rao@...inx.com>
To: <dan.j.williams@...el.com>, <vinod.koul@...el.com>,
<michal.simek@...inx.com>, <soren.brinkmann@...inx.com>,
<appanad@...inx.com>, <moritz.fischer@...us.com>,
<laurent.pinchart@...asonboard.com>, <luis@...ethencourt.com>,
<Jose.Abreu@...opsys.com>
CC: <dmaengine@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v2 1/3] dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor
Add channel idle state to ensure that dma descriptor is not
submitted when VDMA engine is in progress.
Reviewed-by: Jose Abreu <joabreu@...opsys.com>
Signed-off-by: Kedareswara rao Appana <appanad@...inx.com>
---
Changes fro v2:
---> Add idle check in the reset as suggested by Jose Abreu
---> Removed xilinx_dma_is_running/xilinx_dma_is_idle checks
in the driver and used common idle checks across the driver
as suggested by Laurent Pinchart.
drivers/dma/xilinx/xilinx_dma.c | 56 +++++++++++++----------------------------
1 file changed, 17 insertions(+), 39 deletions(-)
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 8288fe4..be7eb41 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -321,6 +321,7 @@ struct xilinx_dma_tx_descriptor {
* @cyclic: Check for cyclic transfers.
* @genlock: Support genlock mode
* @err: Channel has errors
+ * @idle: Check for channel idle
* @tasklet: Cleanup work after irq
* @config: Device configuration info
* @flush_on_fsync: Flush on Frame sync
@@ -351,6 +352,7 @@ struct xilinx_dma_chan {
bool cyclic;
bool genlock;
bool err;
+ bool idle;
struct tasklet_struct tasklet;
struct xilinx_vdma_config config;
bool flush_on_fsync;
@@ -920,32 +922,6 @@ static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
}
/**
- * xilinx_dma_is_running - Check if DMA channel is running
- * @chan: Driver specific DMA channel
- *
- * Return: '1' if running, '0' if not.
- */
-static bool xilinx_dma_is_running(struct xilinx_dma_chan *chan)
-{
- return !(dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
- XILINX_DMA_DMASR_HALTED) &&
- (dma_ctrl_read(chan, XILINX_DMA_REG_DMACR) &
- XILINX_DMA_DMACR_RUNSTOP);
-}
-
-/**
- * xilinx_dma_is_idle - Check if DMA channel is idle
- * @chan: Driver specific DMA channel
- *
- * Return: '1' if idle, '0' if not.
- */
-static bool xilinx_dma_is_idle(struct xilinx_dma_chan *chan)
-{
- return dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
- XILINX_DMA_DMASR_IDLE;
-}
-
-/**
* xilinx_dma_halt - Halt DMA channel
* @chan: Driver specific DMA channel
*/
@@ -966,6 +942,7 @@ static void xilinx_dma_halt(struct xilinx_dma_chan *chan)
chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
chan->err = true;
}
+ chan->idle = true;
}
/**
@@ -1007,6 +984,9 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
if (chan->err)
return;
+ if (!chan->idle)
+ return;
+
if (list_empty(&chan->pending_list))
return;
@@ -1018,13 +998,6 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
tail_segment = list_last_entry(&tail_desc->segments,
struct xilinx_vdma_tx_segment, node);
- /* If it is SG mode and hardware is busy, cannot submit */
- if (chan->has_sg && xilinx_dma_is_running(chan) &&
- !xilinx_dma_is_idle(chan)) {
- dev_dbg(chan->dev, "DMA controller still busy\n");
- return;
- }
-
/*
* If hardware is idle, then all descriptors on the running lists are
* done, start new transfers
@@ -1110,6 +1083,7 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
}
+ chan->idle = false;
if (!chan->has_sg) {
list_del(&desc->node);
list_add_tail(&desc->node, &chan->active_list);
@@ -1136,6 +1110,9 @@ static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
if (chan->err)
return;
+ if (!chan->idle)
+ return;
+
if (list_empty(&chan->pending_list))
return;
@@ -1181,6 +1158,7 @@ static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
list_splice_tail_init(&chan->pending_list, &chan->active_list);
chan->desc_pendingcount = 0;
+ chan->idle = false;
}
/**
@@ -1196,15 +1174,11 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
if (chan->err)
return;
- if (list_empty(&chan->pending_list))
+ if (!chan->idle)
return;
- /* If it is SG mode and hardware is busy, cannot submit */
- if (chan->has_sg && xilinx_dma_is_running(chan) &&
- !xilinx_dma_is_idle(chan)) {
- dev_dbg(chan->dev, "DMA controller still busy\n");
+ if (list_empty(&chan->pending_list))
return;
- }
head_desc = list_first_entry(&chan->pending_list,
struct xilinx_dma_tx_descriptor, node);
@@ -1302,6 +1276,7 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
list_splice_tail_init(&chan->pending_list, &chan->active_list);
chan->desc_pendingcount = 0;
+ chan->idle = false;
}
/**
@@ -1366,6 +1341,7 @@ static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
}
chan->err = false;
+ chan->idle = true;
return err;
}
@@ -1447,6 +1423,7 @@ static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
spin_lock(&chan->lock);
xilinx_dma_complete_descriptor(chan);
+ chan->idle = true;
chan->start_transfer(chan);
spin_unlock(&chan->lock);
}
@@ -2327,6 +2304,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
chan->has_sg = xdev->has_sg;
chan->desc_pendingcount = 0x0;
chan->ext_addr = xdev->ext_addr;
+ chan->idle = true;
spin_lock_init(&chan->lock);
INIT_LIST_HEAD(&chan->pending_list);
--
2.1.2
Powered by blists - more mailing lists