| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 23 Dec 2016 23:57:51 +0100
From: Ingo Molnar <mingo@...nel.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>,
Borislav Petkov <bp@...en8.de>,
Andrew Morton <akpm@...ux-foundation.org>
Subject: [GIT PULL] x86 fixes
Linus,
Please pull the latest x86-urgent-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-urgent-for-linus
# HEAD: c280f7736ab26a601932b1ce017a3840dbedcfdc Revert "x86/unwind: Detect bad stack return address"
There's a number of fixes:
- a round of fixes for CPUID-less legacy CPUs
- a number of microcode loader fixes
- i8042 detection robustization fixes
- stack dump/unwinder fixes
- x86 SoC platform driver fixes
- a GCC 7 warning fix
- virtualization related fixes
out-of-topic modifications in x86-urgent-for-linus:
-----------------------------------------------------
drivers/input/serio/i8042-x86ia64io.h# d79e141c1c6e: Input: i8042 - Trust firmwar
Thanks,
Ingo
------------------>
Andy Lutomirski (5):
x86/cpu: Probe CPUID leaf 6 even when cpuid_level == 6
x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels
Revert "x86/boot: Fail the boot if !M486 and CPUID is missing"
x86/microcode/intel: Replace sync_core() with native_cpuid()
x86/asm: Rewrite sync_core() to use IRET-to-self
Boris Ostrovsky (1):
x86/microcode/AMD: Use native_cpuid() in load_ucode_amd_bsp()
Borislav Petkov (6):
x86/microcode/AMD: Make find_proper_container() sane again
x86/microcode/AMD: Sanitize apply_microcode_early_amd()
x86/microcode/AMD: Do not load when running on a hypervisor
x86/topology: Document cpu_llc_id
x86/alternatives: Do not use sync_core() to serialize I$
x86/microcode/AMD: Reload proper initrd start address
Dmitry Torokhov (4):
x86/init: Add i8042 state to the platform data
Input: i8042 - Trust firmware a bit more when probing on X86
x86/init: Remove i8042_detect() from platform ops
x86/init: Fix a couple of comment typos
Josh Poimboeuf (3):
x86/unwind: Adjust last frame check for aligned function stacks
x86/unwind: Dump stack data on warnings
Revert "x86/unwind: Detect bad stack return address"
Linus Walleij (1):
x86/platform/intel-mid: Switch MPU3050 driver to IIO
Markus Trippelsdorf (1):
x86/tools: Fix gcc-7 warning in relocs.c
Nicolas Iooss (1):
x86/platform/intel/quark: Add printf attribute to imr_self_test_result()
Peter Zijlstra (1):
x86/paravirt: Mark unused patch_default label
Vitaly Kuznetsov (1):
x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panic
Documentation/x86/topology.txt | 9 +++
arch/x86/boot/cpu.c | 6 --
arch/x86/include/asm/processor.h | 80 +++++++++++++++++-------
arch/x86/include/asm/unwind.h | 2 +-
arch/x86/include/asm/x86_init.h | 26 ++++++--
arch/x86/kernel/acpi/boot.c | 7 +++
arch/x86/kernel/alternative.c | 15 +++--
arch/x86/kernel/cpu/common.c | 7 ++-
arch/x86/kernel/cpu/microcode/amd.c | 56 ++++++++++-------
arch/x86/kernel/cpu/microcode/core.c | 40 +++++++-----
arch/x86/kernel/cpu/microcode/intel.c | 26 +++++++-
arch/x86/kernel/cpu/mshyperv.c | 24 +++++++
arch/x86/kernel/paravirt_patch_32.c | 2 +-
arch/x86/kernel/paravirt_patch_64.c | 2 +-
arch/x86/kernel/platform-quirks.c | 5 ++
arch/x86/kernel/unwind_frame.c | 56 ++++++++++++++---
arch/x86/kernel/x86_init.c | 2 -
arch/x86/platform/ce4100/ce4100.c | 6 --
arch/x86/platform/intel-mid/device_libs/Makefile | 2 +-
arch/x86/platform/intel-mid/intel-mid.c | 7 ---
arch/x86/platform/intel-quark/imr_selftest.c | 3 +-
arch/x86/tools/relocs.c | 3 +-
drivers/input/serio/i8042-x86ia64io.h | 10 ++-
23 files changed, 279 insertions(+), 117 deletions(-)
diff --git a/Documentation/x86/topology.txt b/Documentation/x86/topology.txt
index 06afac252f5b..f3e9d7e9ed6c 100644
--- a/Documentation/x86/topology.txt
+++ b/Documentation/x86/topology.txt
@@ -63,6 +63,15 @@ historical nature and should be cleaned up.
The maximum possible number of packages in the system. Helpful for per
package facilities to preallocate per package information.
+ - cpu_llc_id:
+
+ A per-CPU variable containing:
+ - On Intel, the first APIC ID of the list of CPUs sharing the Last Level
+ Cache
+
+ - On AMD, the Node ID or Core Complex ID containing the Last Level
+ Cache. In general, it is a number identifying an LLC uniquely on the
+ system.
* Cores:
diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c
index 4224ede43b4e..26240dde081e 100644
--- a/arch/x86/boot/cpu.c
+++ b/arch/x86/boot/cpu.c
@@ -87,12 +87,6 @@ int validate_cpu(void)
return -1;
}
- if (CONFIG_X86_MINIMUM_CPU_FAMILY <= 4 && !IS_ENABLED(CONFIG_M486) &&
- !has_eflag(X86_EFLAGS_ID)) {
- printf("This kernel requires a CPU with the CPUID instruction. Build with CONFIG_M486=y to run on this CPU.\n");
- return -1;
- }
-
if (err_flags) {
puts("This kernel requires the following features "
"not present on the CPU:\n");
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 6aa741fbe1df..eaf100508c36 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -602,33 +602,69 @@ static __always_inline void cpu_relax(void)
rep_nop();
}
-/* Stop speculative execution and prefetching of modified code. */
+/*
+ * This function forces the icache and prefetched instruction stream to
+ * catch up with reality in two very specific cases:
+ *
+ * a) Text was modified using one virtual address and is about to be executed
+ * from the same physical page at a different virtual address.
+ *
+ * b) Text was modified on a different CPU, may subsequently be
+ * executed on this CPU, and you want to make sure the new version
+ * gets executed. This generally means you're calling this in a IPI.
+ *
+ * If you're calling this for a different reason, you're probably doing
+ * it wrong.
+ */
static inline void sync_core(void)
{
- int tmp;
-
-#ifdef CONFIG_M486
/*
- * Do a CPUID if available, otherwise do a jump. The jump
- * can conveniently enough be the jump around CPUID.
+ * There are quite a few ways to do this. IRET-to-self is nice
+ * because it works on every CPU, at any CPL (so it's compatible
+ * with paravirtualization), and it never exits to a hypervisor.
+ * The only down sides are that it's a bit slow (it seems to be
+ * a bit more than 2x slower than the fastest options) and that
+ * it unmasks NMIs. The "push %cs" is needed because, in
+ * paravirtual environments, __KERNEL_CS may not be a valid CS
+ * value when we do IRET directly.
+ *
+ * In case NMI unmasking or performance ever becomes a problem,
+ * the next best option appears to be MOV-to-CR2 and an
+ * unconditional jump. That sequence also works on all CPUs,
+ * but it will fault at CPL3 (i.e. Xen PV and lguest).
+ *
+ * CPUID is the conventional way, but it's nasty: it doesn't
+ * exist on some 486-like CPUs, and it usually exits to a
+ * hypervisor.
+ *
+ * Like all of Linux's memory ordering operations, this is a
+ * compiler barrier as well.
*/
- asm volatile("cmpl %2,%1\n\t"
- "jl 1f\n\t"
- "cpuid\n"
- "1:"
- : "=a" (tmp)
- : "rm" (boot_cpu_data.cpuid_level), "ri" (0), "0" (1)
- : "ebx", "ecx", "edx", "memory");
+ register void *__sp asm(_ASM_SP);
+
+#ifdef CONFIG_X86_32
+ asm volatile (
+ "pushfl\n\t"
+ "pushl %%cs\n\t"
+ "pushl $1f\n\t"
+ "iret\n\t"
+ "1:"
+ : "+r" (__sp) : : "memory");
#else
- /*
- * CPUID is a barrier to speculative execution.
- * Prefetched instructions are automatically
- * invalidated when modified.
- */
- asm volatile("cpuid"
- : "=a" (tmp)
- : "0" (1)
- : "ebx", "ecx", "edx", "memory");
+ unsigned int tmp;
+
+ asm volatile (
+ "mov %%ss, %0\n\t"
+ "pushq %q0\n\t"
+ "pushq %%rsp\n\t"
+ "addq $8, (%%rsp)\n\t"
+ "pushfq\n\t"
+ "mov %%cs, %0\n\t"
+ "pushq %q0\n\t"
+ "pushq $1f\n\t"
+ "iretq\n\t"
+ "1:"
+ : "=&r" (tmp), "+r" (__sp) : : "cc", "memory");
#endif
}
diff --git a/arch/x86/include/asm/unwind.h b/arch/x86/include/asm/unwind.h
index c5a7f3a930dd..6fa75b17aec3 100644
--- a/arch/x86/include/asm/unwind.h
+++ b/arch/x86/include/asm/unwind.h
@@ -12,7 +12,7 @@ struct unwind_state {
struct task_struct *task;
int graph_idx;
#ifdef CONFIG_FRAME_POINTER
- unsigned long *bp;
+ unsigned long *bp, *orig_sp;
struct pt_regs *regs;
#else
unsigned long *sp;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 6ba793178441..7ba7e90a9ad6 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -59,7 +59,7 @@ struct x86_init_irqs {
/**
* struct x86_init_oem - oem platform specific customizing functions
- * @arch_setup: platform specific architecure setup
+ * @arch_setup: platform specific architecture setup
* @banner: print a platform specific banner
*/
struct x86_init_oem {
@@ -165,8 +165,25 @@ struct x86_legacy_devices {
};
/**
+ * enum x86_legacy_i8042_state - i8042 keyboard controller state
+ * @X86_LEGACY_I8042_PLATFORM_ABSENT: the controller is always absent on
+ * given platform/subarch.
+ * @X86_LEGACY_I8042_FIRMWARE_ABSENT: firmware reports that the controller
+ * is absent.
+ * @X86_LEGACY_i8042_EXPECTED_PRESENT: the controller is likely to be
+ * present, the i8042 driver should probe for controller existence.
+ */
+enum x86_legacy_i8042_state {
+ X86_LEGACY_I8042_PLATFORM_ABSENT,
+ X86_LEGACY_I8042_FIRMWARE_ABSENT,
+ X86_LEGACY_I8042_EXPECTED_PRESENT,
+};
+
+/**
* struct x86_legacy_features - legacy x86 features
*
+ * @i8042: indicated if we expect the device to have i8042 controller
+ * present.
* @rtc: this device has a CMOS real-time clock present
* @reserve_bios_regions: boot code will search for the EBDA address and the
* start of the 640k - 1M BIOS region. If false, the platform must
@@ -175,6 +192,7 @@ struct x86_legacy_devices {
* documentation for further details.
*/
struct x86_legacy_features {
+ enum x86_legacy_i8042_state i8042;
int rtc;
int reserve_bios_regions;
struct x86_legacy_devices devices;
@@ -188,15 +206,14 @@ struct x86_legacy_features {
* @set_wallclock: set time back to HW clock
* @is_untracked_pat_range exclude from PAT logic
* @nmi_init enable NMI on cpus
- * @i8042_detect pre-detect if i8042 controller exists
* @save_sched_clock_state: save state for sched_clock() on suspend
* @restore_sched_clock_state: restore state for sched_clock() on resume
- * @apic_post_init: adjust apic if neeeded
+ * @apic_post_init: adjust apic if needed
* @legacy: legacy features
* @set_legacy_features: override legacy features. Use of this callback
* is highly discouraged. You should only need
* this if your hardware platform requires further
- * custom fine tuning far beyong what may be
+ * custom fine tuning far beyond what may be
* possible in x86_early_init_platform_quirks() by
* only using the current x86_hardware_subarch
* semantics.
@@ -210,7 +227,6 @@ struct x86_platform_ops {
bool (*is_untracked_pat_range)(u64 start, u64 end);
void (*nmi_init)(void);
unsigned char (*get_nmi_reason)(void);
- int (*i8042_detect)(void);
void (*save_sched_clock_state)(void);
void (*restore_sched_clock_state)(void);
void (*apic_post_init)(void);
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6f65b0eed384..64422f850e95 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -930,6 +930,13 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
x86_platform.legacy.devices.pnpbios = 0;
}
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+ !(acpi_gbl_FADT.boot_flags & ACPI_FADT_8042) &&
+ x86_platform.legacy.i8042 != X86_LEGACY_I8042_PLATFORM_ABSENT) {
+ pr_debug("ACPI: i8042 controller is absent\n");
+ x86_platform.legacy.i8042 = X86_LEGACY_I8042_FIRMWARE_ABSENT;
+ }
+
if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_CMOS_RTC) {
pr_debug("ACPI: not registering RTC platform device\n");
x86_platform.legacy.rtc = 0;
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 5cb272a7a5a3..c5b8f760473c 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -337,7 +337,11 @@ recompute_jump(struct alt_instr *a, u8 *orig_insn, u8 *repl_insn, u8 *insnbuf)
n_dspl, (unsigned long)orig_insn + n_dspl + repl_len);
}
-static void __init_or_module optimize_nops(struct alt_instr *a, u8 *instr)
+/*
+ * "noinline" to cause control flow change and thus invalidate I$ and
+ * cause refetch after modification.
+ */
+static void __init_or_module noinline optimize_nops(struct alt_instr *a, u8 *instr)
{
unsigned long flags;
@@ -346,7 +350,6 @@ static void __init_or_module optimize_nops(struct alt_instr *a, u8 *instr)
local_irq_save(flags);
add_nops(instr + (a->instrlen - a->padlen), a->padlen);
- sync_core();
local_irq_restore(flags);
DUMP_BYTES(instr, a->instrlen, "%p: [%d:%d) optimized NOPs: ",
@@ -359,9 +362,12 @@ static void __init_or_module optimize_nops(struct alt_instr *a, u8 *instr)
* This implies that asymmetric systems where APs have less capabilities than
* the boot processor are not handled. Tough. Make sure you disable such
* features by hand.
+ *
+ * Marked "noinline" to cause control flow change and thus insn cache
+ * to refetch changed I$ lines.
*/
-void __init_or_module apply_alternatives(struct alt_instr *start,
- struct alt_instr *end)
+void __init_or_module noinline apply_alternatives(struct alt_instr *start,
+ struct alt_instr *end)
{
struct alt_instr *a;
u8 *instr, *replacement;
@@ -667,7 +673,6 @@ void *__init_or_module text_poke_early(void *addr, const void *opcode,
unsigned long flags;
local_irq_save(flags);
memcpy(addr, opcode, len);
- sync_core();
local_irq_restore(flags);
/* Could also do a CLFLUSH here to speed up CPU recovery; but
that causes hangs on some VIA CPUs. */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 1f6b50a449ab..dc1697ca5191 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -667,13 +667,14 @@ void get_cpu_cap(struct cpuinfo_x86 *c)
c->x86_capability[CPUID_1_EDX] = edx;
}
+ /* Thermal and Power Management Leaf: level 0x00000006 (eax) */
+ if (c->cpuid_level >= 0x00000006)
+ c->x86_capability[CPUID_6_EAX] = cpuid_eax(0x00000006);
+
/* Additional Intel-defined flags: level 0x00000007 */
if (c->cpuid_level >= 0x00000007) {
cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx);
-
c->x86_capability[CPUID_7_0_EBX] = ebx;
-
- c->x86_capability[CPUID_6_EAX] = cpuid_eax(0x00000006);
c->x86_capability[CPUID_7_ECX] = ecx;
}
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 6f353bdb3a25..6a31e2691f3a 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -116,10 +116,11 @@ static inline u16 find_equiv_id(struct equiv_cpu_entry *equiv_cpu_table,
/*
* This scans the ucode blob for the proper container as we can have multiple
- * containers glued together.
+ * containers glued together. Returns the equivalence ID from the equivalence
+ * table or 0 if none found.
*/
-static struct container
-find_proper_container(u8 *ucode, size_t size, u16 *ret_id)
+static u16
+find_proper_container(u8 *ucode, size_t size, struct container *ret_cont)
{
struct container ret = { NULL, 0 };
u32 eax, ebx, ecx, edx;
@@ -138,7 +139,7 @@ find_proper_container(u8 *ucode, size_t size, u16 *ret_id)
if (header[0] != UCODE_MAGIC ||
header[1] != UCODE_EQUIV_CPU_TABLE_TYPE || /* type */
header[2] == 0) /* size */
- return ret;
+ return eq_id;
eax = 0x00000001;
ecx = 0;
@@ -163,8 +164,9 @@ find_proper_container(u8 *ucode, size_t size, u16 *ret_id)
* ucode update loop below
*/
left = ret.size - offset;
- *ret_id = eq_id;
- return ret;
+
+ *ret_cont = ret;
+ return eq_id;
}
/*
@@ -189,7 +191,7 @@ find_proper_container(u8 *ucode, size_t size, u16 *ret_id)
ucode = data;
}
- return ret;
+ return eq_id;
}
static int __apply_microcode_amd(struct microcode_amd *mc_amd)
@@ -214,17 +216,18 @@ static int __apply_microcode_amd(struct microcode_amd *mc_amd)
* and on 32-bit during save_microcode_in_initrd_amd() -- we can call
* load_microcode_amd() to save equivalent cpu table and microcode patches in
* kernel heap memory.
+ *
+ * Returns true if container found (sets @ret_cont), false otherwise.
*/
-static struct container
-apply_microcode_early_amd(void *ucode, size_t size, bool save_patch)
+static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
+ struct container *ret_cont)
{
- struct container ret = { NULL, 0 };
u8 (*patch)[PATCH_MAX_SIZE];
+ u32 rev, *header, *new_rev;
+ struct container ret;
int offset, left;
- u32 rev, *header;
- u8 *data;
u16 eq_id = 0;
- u32 *new_rev;
+ u8 *data;
#ifdef CONFIG_X86_32
new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
@@ -235,11 +238,11 @@ apply_microcode_early_amd(void *ucode, size_t size, bool save_patch)
#endif
if (check_current_patch_level(&rev, true))
- return (struct container){ NULL, 0 };
+ return false;
- ret = find_proper_container(ucode, size, &eq_id);
+ eq_id = find_proper_container(ucode, size, &ret);
if (!eq_id)
- return (struct container){ NULL, 0 };
+ return false;
this_equiv_id = eq_id;
header = (u32 *)ret.data;
@@ -273,7 +276,11 @@ apply_microcode_early_amd(void *ucode, size_t size, bool save_patch)
data += offset;
left -= offset;
}
- return ret;
+
+ if (ret_cont)
+ *ret_cont = ret;
+
+ return true;
}
static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family)
@@ -294,6 +301,7 @@ static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family)
void __init load_ucode_amd_bsp(unsigned int family)
{
struct ucode_cpu_info *uci;
+ u32 eax, ebx, ecx, edx;
struct cpio_data cp;
const char *path;
bool use_pa;
@@ -315,9 +323,12 @@ void __init load_ucode_amd_bsp(unsigned int family)
return;
/* Get BSP's CPUID.EAX(1), needed in load_microcode_amd() */
- uci->cpu_sig.sig = cpuid_eax(1);
+ eax = 1;
+ ecx = 0;
+ native_cpuid(&eax, &ebx, &ecx, &edx);
+ uci->cpu_sig.sig = eax;
- apply_microcode_early_amd(cp.data, cp.size, true);
+ apply_microcode_early_amd(cp.data, cp.size, true, NULL);
}
#ifdef CONFIG_X86_32
@@ -349,7 +360,7 @@ void load_ucode_amd_ap(unsigned int family)
* This would set amd_ucode_patch above so that the following APs can
* use it directly instead of going down this path again.
*/
- apply_microcode_early_amd(cp.data, cp.size, true);
+ apply_microcode_early_amd(cp.data, cp.size, true, NULL);
}
#else
void load_ucode_amd_ap(unsigned int family)
@@ -387,8 +398,7 @@ void load_ucode_amd_ap(unsigned int family)
}
}
- cont = apply_microcode_early_amd(cp.data, cp.size, false);
- if (!(cont.data && cont.size)) {
+ if (!apply_microcode_early_amd(cp.data, cp.size, false, &cont)) {
cont.size = -1;
return;
}
@@ -443,7 +453,7 @@ int __init save_microcode_in_initrd_amd(unsigned int fam)
return -EINVAL;
}
- cont = find_proper_container(cp.data, cp.size, &eq_id);
+ eq_id = find_proper_container(cp.data, cp.size, &cont);
if (!eq_id) {
cont.size = -1;
return -EINVAL;
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 6996413c78c3..2af69d27da62 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -44,7 +44,7 @@
#define DRIVER_VERSION "2.2"
static struct microcode_ops *microcode_ops;
-static bool dis_ucode_ldr;
+static bool dis_ucode_ldr = true;
LIST_HEAD(microcode_cache);
@@ -76,6 +76,7 @@ struct cpu_info_ctx {
static bool __init check_loader_disabled_bsp(void)
{
static const char *__dis_opt_str = "dis_ucode_ldr";
+ u32 a, b, c, d;
#ifdef CONFIG_X86_32
const char *cmdline = (const char *)__pa_nodebug(boot_command_line);
@@ -88,8 +89,23 @@ static bool __init check_loader_disabled_bsp(void)
bool *res = &dis_ucode_ldr;
#endif
- if (cmdline_find_option_bool(cmdline, option))
- *res = true;
+ if (!have_cpuid_p())
+ return *res;
+
+ a = 1;
+ c = 0;
+ native_cpuid(&a, &b, &c, &d);
+
+ /*
+ * CPUID(1).ECX[31]: reserved for hypervisor use. This is still not
+ * completely accurate as xen pv guests don't see that CPUID bit set but
+ * that's good enough as they don't land on the BSP path anyway.
+ */
+ if (c & BIT(31))
+ return *res;
+
+ if (cmdline_find_option_bool(cmdline, option) <= 0)
+ *res = false;
return *res;
}
@@ -121,9 +137,6 @@ void __init load_ucode_bsp(void)
if (check_loader_disabled_bsp())
return;
- if (!have_cpuid_p())
- return;
-
vendor = x86_cpuid_vendor();
family = x86_cpuid_family();
@@ -157,9 +170,6 @@ void load_ucode_ap(void)
if (check_loader_disabled_ap())
return;
- if (!have_cpuid_p())
- return;
-
vendor = x86_cpuid_vendor();
family = x86_cpuid_family();
@@ -233,14 +243,12 @@ struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa)
# endif
/*
- * Did we relocate the ramdisk?
- *
- * So we possibly relocate the ramdisk *after* applying microcode on the
- * BSP so we rely on use_pa (use physical addresses) - even if it is not
- * absolutely correct - to determine whether we've done the ramdisk
- * relocation already.
+ * Fixup the start address: after reserve_initrd() runs, initrd_start
+ * has the virtual address of the beginning of the initrd. It also
+ * possibly relocates the ramdisk. In either case, initrd_start contains
+ * the updated address so use that instead.
*/
- if (!use_pa && relocated_ramdisk)
+ if (!use_pa && initrd_start)
start = initrd_start;
return find_cpio_data(path, (void *)start, size, NULL);
diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c
index 54d50c3694d8..b624b54912e1 100644
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -368,6 +368,26 @@ scan_microcode(void *data, size_t size, struct ucode_cpu_info *uci, bool save)
return patch;
}
+static void cpuid_1(void)
+{
+ /*
+ * According to the Intel SDM, Volume 3, 9.11.7:
+ *
+ * CPUID returns a value in a model specific register in
+ * addition to its usual register return values. The
+ * semantics of CPUID cause it to deposit an update ID value
+ * in the 64-bit model-specific register at address 08BH
+ * (IA32_BIOS_SIGN_ID). If no update is present in the
+ * processor, the value in the MSR remains unmodified.
+ *
+ * Use native_cpuid -- this code runs very early and we don't
+ * want to mess with paravirt.
+ */
+ unsigned int eax = 1, ebx, ecx = 0, edx;
+
+ native_cpuid(&eax, &ebx, &ecx, &edx);
+}
+
static int collect_cpu_info_early(struct ucode_cpu_info *uci)
{
unsigned int val[2];
@@ -393,7 +413,7 @@ static int collect_cpu_info_early(struct ucode_cpu_info *uci)
native_wrmsrl(MSR_IA32_UCODE_REV, 0);
/* As documented in the SDM: Do a CPUID 1 here */
- sync_core();
+ cpuid_1();
/* get the current revision from MSR 0x8B */
native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
@@ -593,7 +613,7 @@ static int apply_microcode_early(struct ucode_cpu_info *uci, bool early)
native_wrmsrl(MSR_IA32_UCODE_REV, 0);
/* As documented in the SDM: Do a CPUID 1 here */
- sync_core();
+ cpuid_1();
/* get the current revision from MSR 0x8B */
native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
@@ -805,7 +825,7 @@ static int apply_microcode_intel(int cpu)
wrmsrl(MSR_IA32_UCODE_REV, 0);
/* As documented in the SDM: Do a CPUID 1 here */
- sync_core();
+ cpuid_1();
/* get the current revision from MSR 0x8B */
rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 6c044543545e..f37e02e41a77 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -30,6 +30,7 @@
#include <asm/apic.h>
#include <asm/timer.h>
#include <asm/reboot.h>
+#include <asm/nmi.h>
struct ms_hyperv_info ms_hyperv;
EXPORT_SYMBOL_GPL(ms_hyperv);
@@ -157,6 +158,26 @@ static unsigned char hv_get_nmi_reason(void)
return 0;
}
+#ifdef CONFIG_X86_LOCAL_APIC
+/*
+ * Prior to WS2016 Debug-VM sends NMIs to all CPUs which makes
+ * it dificult to process CHANNELMSG_UNLOAD in case of crash. Handle
+ * unknown NMI on the first CPU which gets it.
+ */
+static int hv_nmi_unknown(unsigned int val, struct pt_regs *regs)
+{
+ static atomic_t nmi_cpu = ATOMIC_INIT(-1);
+
+ if (!unknown_nmi_panic)
+ return NMI_DONE;
+
+ if (atomic_cmpxchg(&nmi_cpu, -1, raw_smp_processor_id()) != -1)
+ return NMI_HANDLED;
+
+ return NMI_DONE;
+}
+#endif
+
static void __init ms_hyperv_init_platform(void)
{
/*
@@ -182,6 +203,9 @@ static void __init ms_hyperv_init_platform(void)
pr_info("HyperV: LAPIC Timer Frequency: %#x\n",
lapic_timer_frequency);
}
+
+ register_nmi_handler(NMI_UNKNOWN, hv_nmi_unknown, NMI_FLAG_FIRST,
+ "hv_nmi_unknown");
#endif
if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c
index d33ef165b1f8..553acbbb4d32 100644
--- a/arch/x86/kernel/paravirt_patch_32.c
+++ b/arch/x86/kernel/paravirt_patch_32.c
@@ -68,7 +68,7 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
#endif
default:
-patch_default:
+patch_default: __maybe_unused
ret = paravirt_patch_default(type, clobbers, ibuf, addr, len);
break;
diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c
index f4fcf26c9fce..11aaf1eaa0e4 100644
--- a/arch/x86/kernel/paravirt_patch_64.c
+++ b/arch/x86/kernel/paravirt_patch_64.c
@@ -80,7 +80,7 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
#endif
default:
-patch_default:
+patch_default: __maybe_unused
ret = paravirt_patch_default(type, clobbers, ibuf, addr, len);
break;
diff --git a/arch/x86/kernel/platform-quirks.c b/arch/x86/kernel/platform-quirks.c
index 24a50301f150..91271122f0df 100644
--- a/arch/x86/kernel/platform-quirks.c
+++ b/arch/x86/kernel/platform-quirks.c
@@ -6,6 +6,7 @@
void __init x86_early_init_platform_quirks(void)
{
+ x86_platform.legacy.i8042 = X86_LEGACY_I8042_EXPECTED_PRESENT;
x86_platform.legacy.rtc = 1;
x86_platform.legacy.reserve_bios_regions = 0;
x86_platform.legacy.devices.pnpbios = 1;
@@ -16,10 +17,14 @@ void __init x86_early_init_platform_quirks(void)
break;
case X86_SUBARCH_XEN:
case X86_SUBARCH_LGUEST:
+ x86_platform.legacy.devices.pnpbios = 0;
+ x86_platform.legacy.rtc = 0;
+ break;
case X86_SUBARCH_INTEL_MID:
case X86_SUBARCH_CE4100:
x86_platform.legacy.devices.pnpbios = 0;
x86_platform.legacy.rtc = 0;
+ x86_platform.legacy.i8042 = X86_LEGACY_I8042_PLATFORM_ABSENT;
break;
}
diff --git a/arch/x86/kernel/unwind_frame.c b/arch/x86/kernel/unwind_frame.c
index ea7b7f9a3b9e..4443e499f279 100644
--- a/arch/x86/kernel/unwind_frame.c
+++ b/arch/x86/kernel/unwind_frame.c
@@ -6,6 +6,37 @@
#define FRAME_HEADER_SIZE (sizeof(long) * 2)
+static void unwind_dump(struct unwind_state *state, unsigned long *sp)
+{
+ static bool dumped_before = false;
+ bool prev_zero, zero = false;
+ unsigned long word;
+
+ if (dumped_before)
+ return;
+
+ dumped_before = true;
+
+ printk_deferred("unwind stack type:%d next_sp:%p mask:%lx graph_idx:%d\n",
+ state->stack_info.type, state->stack_info.next_sp,
+ state->stack_mask, state->graph_idx);
+
+ for (sp = state->orig_sp; sp < state->stack_info.end; sp++) {
+ word = READ_ONCE_NOCHECK(*sp);
+
+ prev_zero = zero;
+ zero = word == 0;
+
+ if (zero) {
+ if (!prev_zero)
+ printk_deferred("%p: %016x ...\n", sp, 0);
+ continue;
+ }
+
+ printk_deferred("%p: %016lx (%pB)\n", sp, word, (void *)word);
+ }
+}
+
unsigned long unwind_get_return_address(struct unwind_state *state)
{
unsigned long addr;
@@ -20,15 +51,7 @@ unsigned long unwind_get_return_address(struct unwind_state *state)
addr = ftrace_graph_ret_addr(state->task, &state->graph_idx, *addr_p,
addr_p);
- if (!__kernel_text_address(addr)) {
- printk_deferred_once(KERN_WARNING
- "WARNING: unrecognized kernel stack return address %p at %p in %s:%d\n",
- (void *)addr, addr_p, state->task->comm,
- state->task->pid);
- return 0;
- }
-
- return addr;
+ return __kernel_text_address(addr) ? addr : 0;
}
EXPORT_SYMBOL_GPL(unwind_get_return_address);
@@ -46,7 +69,14 @@ static bool is_last_task_frame(struct unwind_state *state)
unsigned long bp = (unsigned long)state->bp;
unsigned long regs = (unsigned long)task_pt_regs(state->task);
- return bp == regs - FRAME_HEADER_SIZE;
+ /*
+ * We have to check for the last task frame at two different locations
+ * because gcc can occasionally decide to realign the stack pointer and
+ * change the offset of the stack frame by a word in the prologue of a
+ * function called by head/entry code.
+ */
+ return bp == regs - FRAME_HEADER_SIZE ||
+ bp == regs - FRAME_HEADER_SIZE - sizeof(long);
}
/*
@@ -67,6 +97,7 @@ static bool update_stack_state(struct unwind_state *state, void *addr,
size_t len)
{
struct stack_info *info = &state->stack_info;
+ enum stack_type orig_type = info->type;
/*
* If addr isn't on the current stack, switch to the next one.
@@ -80,6 +111,9 @@ static bool update_stack_state(struct unwind_state *state, void *addr,
&state->stack_mask))
return false;
+ if (!state->orig_sp || info->type != orig_type)
+ state->orig_sp = addr;
+
return true;
}
@@ -178,11 +212,13 @@ bool unwind_next_frame(struct unwind_state *state)
"WARNING: kernel stack regs at %p in %s:%d has bad 'bp' value %p\n",
state->regs, state->task->comm,
state->task->pid, next_frame);
+ unwind_dump(state, (unsigned long *)state->regs);
} else {
printk_deferred_once(KERN_WARNING
"WARNING: kernel stack frame pointer at %p in %s:%d has bad value %p\n",
state->bp, state->task->comm,
state->task->pid, next_frame);
+ unwind_dump(state, state->bp);
}
the_end:
state->stack_info.type = STACK_TYPE_UNKNOWN;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 0bd9f1287f39..11a93f005268 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -89,7 +89,6 @@ struct x86_cpuinit_ops x86_cpuinit = {
};
static void default_nmi_init(void) { };
-static int default_i8042_detect(void) { return 1; };
struct x86_platform_ops x86_platform __ro_after_init = {
.calibrate_cpu = native_calibrate_cpu,
@@ -100,7 +99,6 @@ struct x86_platform_ops x86_platform __ro_after_init = {
.is_untracked_pat_range = is_ISA_range,
.nmi_init = default_nmi_init,
.get_nmi_reason = default_get_nmi_reason,
- .i8042_detect = default_i8042_detect,
.save_sched_clock_state = tsc_save_sched_clock_state,
.restore_sched_clock_state = tsc_restore_sched_clock_state,
};
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
index 821cb41f00e6..ce4b06733c09 100644
--- a/arch/x86/platform/ce4100/ce4100.c
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -23,11 +23,6 @@
#include <asm/io_apic.h>
#include <asm/emergency-restart.h>
-static int ce4100_i8042_detect(void)
-{
- return 0;
-}
-
/*
* The CE4100 platform has an internal 8051 Microcontroller which is
* responsible for signaling to the external Power Management Unit the
@@ -145,7 +140,6 @@ static void sdv_pci_init(void)
void __init x86_ce4100_early_setup(void)
{
x86_init.oem.arch_setup = sdv_arch_setup;
- x86_platform.i8042_detect = ce4100_i8042_detect;
x86_init.resources.probe_roms = x86_init_noop;
x86_init.mpparse.get_smp_config = x86_init_uint_noop;
x86_init.mpparse.find_smp_config = x86_init_noop;
diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile
index dd6cfa4ad3ac..61b5ed2b7d40 100644
--- a/arch/x86/platform/intel-mid/device_libs/Makefile
+++ b/arch/x86/platform/intel-mid/device_libs/Makefile
@@ -19,7 +19,7 @@ obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_spidev.o
# I2C Devices
obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o
obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o
-obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o
+obj-$(subst m,y,$(CONFIG_MPU3050_I2C)) += platform_mpu3050.o
obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o
obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o
# I2C GPIO Expanders
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 7850128f0026..12a272582cdc 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -161,12 +161,6 @@ static void intel_mid_arch_setup(void)
regulator_has_full_constraints();
}
-/* MID systems don't have i8042 controller */
-static int intel_mid_i8042_detect(void)
-{
- return 0;
-}
-
/*
* Moorestown does not have external NMI source nor port 0x61 to report
* NMI status. The possible NMI sources are from pmu as a result of NMI
@@ -197,7 +191,6 @@ void __init x86_intel_mid_early_setup(void)
x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
x86_platform.calibrate_tsc = intel_mid_calibrate_tsc;
- x86_platform.i8042_detect = intel_mid_i8042_detect;
x86_init.timers.wallclock_init = intel_mid_rtc_init;
x86_platform.get_nmi_reason = intel_mid_get_nmi_reason;
diff --git a/arch/x86/platform/intel-quark/imr_selftest.c b/arch/x86/platform/intel-quark/imr_selftest.c
index f5bad40936ac..b8f562049cad 100644
--- a/arch/x86/platform/intel-quark/imr_selftest.c
+++ b/arch/x86/platform/intel-quark/imr_selftest.c
@@ -25,7 +25,8 @@
* @fmt: format string.
* ... variadic argument list.
*/
-static void __init imr_self_test_result(int res, const char *fmt, ...)
+static __printf(2, 3)
+void __init imr_self_test_result(int res, const char *fmt, ...)
{
va_list vlist;
diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index 0c2fae8d929d..73eb7fd4aec4 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -992,11 +992,12 @@ static void emit_relocs(int as_text, int use_real_mode)
die("Segment relocations found but --realmode not specified\n");
/* Order the relocations for more efficient processing */
- sort_relocs(&relocs16);
sort_relocs(&relocs32);
#if ELF_BITS == 64
sort_relocs(&relocs32neg);
sort_relocs(&relocs64);
+#else
+ sort_relocs(&relocs16);
#endif
/* Print the relocations */
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 73a4e68448fc..77551f522202 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -983,7 +983,11 @@ static int __init i8042_pnp_init(void)
#if defined(__ia64__)
return -ENODEV;
#else
- pr_info("PNP: No PS/2 controller found. Probing ports directly.\n");
+ pr_info("PNP: No PS/2 controller found.\n");
+ if (x86_platform.legacy.i8042 !=
+ X86_LEGACY_I8042_EXPECTED_PRESENT)
+ return -ENODEV;
+ pr_info("Probing ports directly.\n");
return 0;
#endif
}
@@ -1070,8 +1074,8 @@ static int __init i8042_platform_init(void)
#ifdef CONFIG_X86
u8 a20_on = 0xdf;
- /* Just return if pre-detection shows no i8042 controller exist */
- if (!x86_platform.i8042_detect())
+ /* Just return if platform does not have i8042 controller */
+ if (x86_platform.legacy.i8042 == X86_LEGACY_I8042_PLATFORM_ABSENT)
return -ENODEV;
#endif
Powered by blists - more mailing lists