lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <20161226052029.10552-6-jh80.chung@samsung.com>
Date:   Mon, 26 Dec 2016 14:20:28 +0900
From:   Jaehoon Chung <jh80.chung@...sung.com>
To:     linux-pci@...r.kernel.org
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-samsung-soc@...r.kernel.org, bhelgaas@...gle.com,
        robh+dt@...nel.org, mark.rutland@....com, kgene@...nel.org,
        krzk@...nel.org, javier@....samsung.com, kishon@...com,
        will.deacon@....com, catalin.marinas@....com, cpgs@...sung.com,
        Jaehoon Chung <jh80.chung@...sung.com>
Subject: [RFC PATCH 5/6] Documentation: pci: add the exynos5433-pcie binding

Signed-off-by: Jaehoon Chung <jh80.chung@...sung.com>
---
 .../devicetree/bindings/pci/exynos5433-pcie.txt    | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/exynos5433-pcie.txt

diff --git a/Documentation/devicetree/bindings/pci/exynos5433-pcie.txt b/Documentation/devicetree/bindings/pci/exynos5433-pcie.txt
new file mode 100644
index 0000000..932a847
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/exynos5433-pcie.txt
@@ -0,0 +1,36 @@
+* Samsung Exynos5433 PCIe interface
+
+This PCIe host controller is based on the Synopsis Designware PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: "samsung,exynos5433-pcie"
+- reg: base addresses and lengths of the pcie controller,
+	the phy controller, additional register for the phy controller.
+- reg-names: Must be "elbi", "phy" and "dbi" for each regs
+- interrupt-names: Must be "intr" for legacy interrupt pin.
+
+Other common properites refer to
+	Documentation/devicetree/binding/pci/designware-pcie.txt
+
+Example:
+
+	pcie: pcie@...00000 {
+		compatible ="samsung,exynos5433-pcie", "snps,dw-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "intr";
+		clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>;
+		clock-names = "pcie", "pcie_bus";
+		num-lanes = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_bus>;
+		reg = <0x156b0000 0x1000>, <0x15680000 0x1000>,
+		    <0x15700000 0x1000>, <0x0c000000 0x1000>;
+		reg-names = "elbi", "phy", "dbi", "config";
+		ranges = <0x81000000 0 0	  0x0c001000 0 0x00010000
+			  0x82000000 0 0x0c011000 0x0c011000 0 0x3feefff>;
+		status = "disabled";
+	};
-- 
2.10.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ