Message-ID: <20161229134719.GA941@ozzy.nask.waw.pl>
Date:   Thu, 29 Dec 2016 14:47:19 +0100
From:   Michał Kępień <kernel@...pniu.pl>
To:     Pali Rohár <pali.rohar@...il.com>
Cc:     Jean Delvare <jdelvare@...e.com>, Wolfram Sang <wsa@...-dreams.de>,
        Steven Honeyman <stevenhoneyman@...il.com>,
        Valdis.Kletnieks@...edu,
        Jochen Eisinger <jochen@...guin-breeder.org>,
        Gabriele Mazzotta <gabriele.mzt@...il.com>,
        Andy Lutomirski <luto@...nel.org>, Mario_Limonciello@...l.com,
        Alex Hung <alex.hung@...onical.com>,
        Takashi Iwai <tiwai@...e.de>, linux-i2c@...r.kernel.org,
        linux-kernel@...r.kernel.org, platform-driver-x86@...r.kernel.org
Subject: Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on
 Dell machines

> On Thursday 29 December 2016 09:29:36 Michał Kępień wrote:
> > > Dell platform team told us that some (DMI whitelisted) Dell
> > > Latitude machines have ST microelectronics accelerometer at i2c
> > > address 0x29. That i2c address is not specified in DMI or ACPI, so
> > > runtime detection without whitelist which is below is not
> > > possible.
> > > 
> > > Presence of that ST microelectronics accelerometer is verified by
> > > existence of SMO88xx ACPI device which represent that
> > > accelerometer. Unfortunately without i2c address.
> > 
> > This part of the commit message sounded a bit confusing to me at
> > first because there is already an ACPI driver which handles SMO88xx
> > devices (dell-smo8800).  My understanding is that:
> > 
> >   * the purpose of this patch is to expose a richer interface (as
> >     provided by lis3lv02d) to these devices on some machines,
> > 
> >   * on whitelisted machines, dell-smo8800 and lis3lv02d can work
> >     simultaneously (even though dell-smo8800 effectively duplicates
> >     the work that lis3lv02d does).
> 
> No. dell-smo8800 reads from ACPI irq number and exports /dev/freefall 
> device which notify userspace about falls. lis3lv02d is i2c driver which 
> exports axes of accelerometer. Additionaly lis3lv02d can export also 
> /dev/freefall if registerer of i2c device provides irq number -- which 
> is not case of this patch.
> 
> So both drivers are doing different things and both are useful.
> 
> IIRC both dell-smo8800 and lis3lv02d represent one HW device (that ST 
> microelectronics accelerometer) but due to complicated HW abstraction 
> and layers on Dell laptops it is handled by two drivers, one ACPI and 
> one i2c.
> 
> Yes, in ideal world irq number should be passed to lis3lv02d driver and 
> that would export whole device (with /dev/freefall too), but due to HW 
> abstraction it is too much complicated...

Why?  AFAICT, all that is required to pass that IRQ number all the way
down to lis3lv02d is to set the irq field of the struct i2c_board_info
you are passing to i2c_new_device().  And you can extract that IRQ
number e.g. in check_acpi_smo88xx_device().  However, you would then
need to make sure dell-smo8800 does not attempt to request the same IRQ
on whitelisted machines.  This got me thinking about a way to somehow
incorporate your changes into dell-smo8800 using Wolfram's bus_notifier
suggestion, but I do not have a working solution for now.  What is
tempting about this approach is that you would not have to scan the ACPI
namespace in search of SMO88xx devices, because smo8800_add() is
automatically called for them.  However, I fear that the resulting
solution may be more complicated than the one you submitted.

> 
> > If I got something wrong, please correct me.  If I got it right, it
> > might make sense to rephrase the commit message a bit so that the
> > first bullet point above is immediately clear to the reader.
> > 
> > > This patch registers lis3lv02d device at i2c address 0x29 if is
> > > detected.
> > > 
> > > Finally commit a7ae81952cda ("i2c: i801: Allow ACPI SystemIO
> > > OpRegion to conflict with PCI BAR") allowed to use i2c-i801 driver
> > > on Dell machines so lis3lv02d correctly initialize accelerometer.
> > > 
> > > Tested on Dell Latitude E6440.
> > > 
> > > Signed-off-by: Pali Rohár <pali.rohar@...il.com>
> > > ---
> > > 
> > >  drivers/i2c/busses/i2c-i801.c |   98
> > >  +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 98
> > >  insertions(+)
> > > 
> > > diff --git a/drivers/i2c/busses/i2c-i801.c
> > > b/drivers/i2c/busses/i2c-i801.c index eb3627f..188cfd4 100644
> > > --- a/drivers/i2c/busses/i2c-i801.c
> > > +++ b/drivers/i2c/busses/i2c-i801.c
> > > @@ -1118,6 +1118,101 @@ static void dmi_check_onboard_devices(const
> > > struct dmi_header *dm, void *adap)
> > > 
> > >  	}
> > >  
> > >  }
> > > 
> > > +static acpi_status check_acpi_smo88xx_device(acpi_handle
> > > obj_handle, +					     u32 nesting_level,
> > > +					     void *context,
> > > +					     void **return_value)
> > > +{
> > > +	struct acpi_device_info *info;
> > > +	acpi_status status;
> > > +	char *hid;
> > > +
> > > +	status = acpi_get_object_info(obj_handle, &info);
> > 
> > acpi_get_object_info() allocates the returned buffer, which the
> > caller has to free.
> 
> Ok, I will fix it in next patch iteration.
> 
> > > +	if (!ACPI_SUCCESS(status) || !(info->valid & ACPI_VALID_HID))
> > > +		return AE_OK;
> > > +
> > > +	hid = info->hardware_id.string;
> > > +	if (!hid)
> > > +		return AE_OK;
> > > +
> > > +	if (strlen(hid) < 7)
> > > +		return AE_OK;
> > > +
> > > +	if (memcmp(hid, "SMO88", 5) != 0)
> > > +		return AE_OK;
> > > +
> > > +	*((bool *)return_value) = true;
> > > +	return AE_CTRL_TERMINATE;
> > > +}
> > > +
> > > +static bool is_dell_system_with_lis3lv02d(void)
> > > +{
> > > +	bool found;
> > > +	acpi_status status;
> > > +	const char *vendor;
> > > +
> > > +	vendor = dmi_get_system_info(DMI_SYS_VENDOR);
> > > +	if (strcmp(vendor, "Dell Inc.") != 0)
> > > +		return false;
> > > +
> > > +	/*
> > > +	 * Check if ACPI device SMO88xx exists and if is enabled. That
> > > ACPI +	 * device represent our ST microelectronics lis3lv02d
> > > accelerometer but +	 * unfortunately without any other additional
> > > information. +	 */
> > > +	found = false;
> > > +	status = acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL,
> > > +				  (void **)&found);
> > > +	if (!ACPI_SUCCESS(status) || !found)
> > > +		return false;
> > > +
> > > +	return true;
> > > +}
> > > +
> > > +/*
> > > + * Dell platform team told us that these Latitude devices have
> > > + * ST microelectronics accelerometer at i2c address 0x29.
> > > + * That i2c address is not specified in DMI or ACPI, so runtime
> > > + * detection without whitelist which is below is not possible.
> > > + */
> > > +static const char * const dmi_dell_product_names[] = {
> > > +	"Latitude E5250",
> > > +	"Latitude E5450",
> > > +	"Latitude E5550",
> > > +	"Latitude E6440",
> > > +	"Latitude E6440 ATG",
> > > +	"Latitude E6540",
> > > +};
> > > +
> > > +static void register_dell_lis3lv02d_i2c_device(struct i801_priv
> > > *priv) +{
> > > +	struct i2c_board_info info;
> > > +	const char *product_name;
> > > +	bool known_i2c_address;
> > > +	int i;
> > > +
> > > +	known_i2c_address = false;
> > > +	product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
> > > +	for (i = 0; i < ARRAY_SIZE(dmi_dell_product_names); ++i) {
> > > +		if (strcmp(product_name, dmi_dell_product_names[i]) == 0) {
> > > +			known_i2c_address = true;
> > > +			break;
> > > +		}
> > > +	}
> > > +
> > > +	if (!known_i2c_address) {
> > > +		dev_warn(&priv->pci_dev->dev,
> > > +			 "Accelerometer lis3lv02d i2c device is present "
> > > +			 "but its i2c address is unknown, skipping ...\n");
> > 
> > You are probably well aware of this, but checkpatch prefers keeping
> > long log messages in one line.  I am pointing it out just in case.
> 
> Yes, but I do not know how to fix it. Splitting message into two lines 
> generates warning. Having long line generates warning too.

Weird, checkpatch does not protest on my machine when the log message is
written on a single line...

> 
> > > +		return;
> > > +	}
> > > +
> > > +	memset(&info, 0, sizeof(struct i2c_board_info));
> > 
> > How about just doing "struct i2c_board_info info = { 0 };" instead?
> 
> Ok.
> 
> > > +	info.addr = 0x29;
> > > +	strlcpy(info.type, "lis3lv02d", I2C_NAME_SIZE);
> > > +	i2c_new_device(&priv->adapter, &info);
> > > +}
> > > +
> > > 
> > >  /* Register optional slaves */
> > >  static void i801_probe_optional_slaves(struct i801_priv *priv)
> > >  {
> > > 
> > > @@ -1136,6 +1231,9 @@ static void i801_probe_optional_slaves(struct
> > > i801_priv *priv)
> > > 
> > >  	if (dmi_name_in_vendors("FUJITSU"))
> > >  	
> > >  		dmi_walk(dmi_check_onboard_devices, &priv->adapter);
> > > 
> > > +
> > > +	if (is_dell_system_with_lis3lv02d())
> > > +		register_dell_lis3lv02d_i2c_device(priv);
> > > 
> > >  }
> > >  #else
> > >  static void __init input_apanel_init(void) {}
> > 
> > I tested this patch on a Vostro V131, which is not on the whitelist,
> > so all I got was the warning message, but to this extent, it works
> > for me.
> 
> Hm... That means your notebook has ST microelectronics accelerometer 
> too. You could try to find it on i2c-i801 bus with userspace i2cdetect 
> program (part of i2c-tools) and get i2c address.

Bingo, it is at 0x1d.  I modified your patch to set the i2c address to
0x1d and at least free fall detection seems to be working correctly.

-- 
Best regards,
Michał Kępień

Powered by blists - more mailing lists